Skip to main

Vehicle Standard (Australian Design Rule 30/01 – Smoke Emission Control for Diesel Vehicles) 2006

In force
Administered by
  • Department of Infrastructure, Transport, Regional Development, Communications, Sport and the Arts

This item is authorised by the following title:

Superseded version
F2006L0128011 May 2006 - 29 November 2021

This standard was originally made under section 7 of the Motor Vehicle Standards Act 1989 and from 1 July 2021 continues in force as if it were a national road vehicle standard determined under section 12 of the Road Vehicle Standards Act 2018 (see Schedule 3, Part 2, item 2 of the Road Vehicle Standards (Consequential and Transitional Provisions) Act 2018).

This standard repeals each vehicle standard with the name ADR 30/01, and each amendment of such a standard, that is: (a) made under section 7 of the Motor Vehicles Standard Act 1989; and (b) in force at the commencement of this standard. This standard also repeals each instrument made under section 7 of the Motor Vehicles Standard Act 1989 that creates or amends a vehicle standard with the name ADR 30/01, if there are no other vehic


Downloads

Access downloadable documents for version effective 11 May 2006 - 29 November 2021

Legislative instrument

Explanatory statement

Incorporated by reference

  • Opacity of Smoke Emission of the USA Code of Federal Regulations, Part 86 - Control of Air Pollution from new and in-use motor vehicles and new and in-use motor vehicle engines certification and test procedures - Subpart A 40CFR 86.098-11 Emissions standards for 1998 and later model year diesel heavy-duty engines and vehicles: s6.2

  • Opacity of Smoke Emission of the USA Code of Federal Regulations, Part 86 - Control of Air Pollution from new and in-use motor vehicles and new and in-use motor vehicle engines certification and test procedures - Subpart I - Emission Regulations for new diesel heavy-duty engines; smoke exhaust test procedure: s6.2

  • UN ECE Regulation 24: s6.1