Australian Government Coat of ArmsAustralian Government

Federal Register of Legislation

Annual survey

We would appreciate it if you could complete our website survey, open until 28 November 2025.

Vehicle Standard (Australian Design Rule 35/06 – Commercial Vehicle Brake Systems) 2018

In force
Administered by
  • Department of Infrastructure, Transport, Regional Development, Communications, Sport and the Arts

This item is authorised by the following title:

Superseded version
F2018L0066429 May 2018 - 01 March 2022

This standard was originally made under section 7 of the Motor Vehicle Standards Act 1989 and from 1 July 2021 continues in force as if it were a national road vehicle standard determined under section 12 of the Road Vehicle Standards Act 2018 (see Schedule 3, Part 2, item 2 of the Road Vehicle Standards (Consequential and Transitional Provisions) Act 2018).

Downloads

Access downloadable documents for version effective 29 May 2018 - 01 March 2022

Legislative instrument

Word:

1 Volume

PDF:

1 Volume

Explanatory statement

Word:

2 Volumes

PDF:

2 Volumes

Incorporated by reference

  • AS 4945 2000 (Commercial road vehicles - Interchangeable quick connect/release couplings for use with air-pressure braking systems)

  • ASTM E1136 93 and ASTM E1337 90 - specify a standard reference test tyre, and a method for determining the peak braking coefficient of road test surfaces, respectively

  • ISO 11992:2003 (requirements for communication between towing vehicles and trailers

  • ISO 3583:1984 standard specifies characteristic for two types (A and B) of connections used for checking response times and pressure levels for compressed-air braking equipment on road vehicles

  • ISO 7638 1:2003 and ISO 7638 2:2003 - These standards specify dimensions, contact allocation and test requirements for electrical connectors used between towing vehicles and trailers

  • UN Regulation No. 13 – UNIFORM PROVISIONS CONCERNING THE APPROVAL OF VEHICLES OF CATEGORIES M, N AND O WITH REGARD TO BRAKING