Australian Government

Federal Register of Legislation

Autonomous Sanctions (Export Sanctioned Goods – Syria) Designation 2012

In force

Administered by

Department of Foreign Affairs and Trade

This item is authorised by the following title:

Autonomous Sanctions Regulations 2011

Latest version

View as made version

F2013C00665 C01

04 July 2013

Table of contents

1 Name of Designation [see Note 1]
2 Commencement [see Note 1]
3 Definitions In this Designation: CAS means a Chemical Abstract Number.
3 Definitions In this Designation: CAS means a Chemical Abstract Number.
- Schedule 1
  - Part 1 Items of particular concern if destined for end users in Syria Division 1 Materials, chemicals, micro-organisms and toxins Item Description CAS No. 1. Acetylene 74-86-2 2. Acetone 67-64-1 3. Aluminium chloride 7446-70-0 4. Antimony 7440-36-0 5. Arsenic 7440-38-2 6. Arsenic trioxide 1327-53-3 7. Bis(2-chloroethyl)ethylamine hydrochloride 3590-07-6 8. Bis(2-chloroethyl)methylamine hydrochloride 55-86-7 9. Benzil 134-81-6 10. Benzaldehyde 100-52-7 11. Benzoin 119-53-9 12. 2-bromochloroethane 107-04-0 13. Butyrylcholinestrerase (BCHE) 14. Chlorine 7782-50-5 15. Dichloromethane 75-09-2 16. Diethyl ether 60-29-7 17. Dimethyl ether 115-10-6 18. Dimethylaminoethanol 108-01-0 19. N,N-Dimethylaniline 121-69-7 20. Dicyclohexylamine (DCA) 101-83-7 21. Diethylenetriamine 111-40-0 22. Ethylene 74-85-1 23. Ethylene dichloride 107-06-2 24. 2-methoxyethanol 109-86-4 25. Ethyl bromide 74-96-4 26. Ethyl chloride 75-00-3 27. Ethylamine 75-04-7 28. Ethylene oxide 75-21-8 29. Fluorapatite 1306-05-4 30. Hexamine 100-97-0 31. Hydrogen sulphide 7783-06-4 32. Isocyanatomethane 624-83-9 33. Isopropanol, 95% concentration or greater 67-63-0 34. Isopropyl bromide 75-26-3 35. Isopropyl ether 108-20-3 36. Mandelic acid 90-64-2 37. Methylamine 74-89-5 38. Methyl bromide 74-83-9 39. Methyl chloride 74-87-3 40. Methyl iodide 74-88-4 41. Methylmercaptane 74-93-1 42. Monoethylene Glycol (MEG) 107-21-1 43. Monoisopropylamine 75-31-0 44. Nitromethane 75-52-5 45. Obidoxime chloride 114-90-9 46. Oxalyl chloride 79-37-8 47. Picric acid 88-89-1 48. Potassium bromide 7758-02-3 49. Potassium sulphide 1312-73-8 50. Potassium thiocyanate 333-20-0 51. Pyridine 110-86-1 52. Pyridostigimine bromide 101-26-8 53. Quinaldine 91-63-4 54. Sodium bromide 7647-15-6 55. Sodium metal 7440-23-5 56. Thiophosphoryl chloride 3982-91-0 57. Tributylamine 102-82-9 58. Tributylphosphite 102-85-2 59. Triethylamine 121-44-8 60. Triisobutylphosphite 1606-96-8 61. Trimethlyamine 75-50-3 62. Tris(2-chloroethyl)amine hydrochloride 817-09-4 63. Sodium hypochlorite 7681-52-9 64. Sulfur trioxide 7446-11-9 65. White/yellow phosphorus 12185-10-3, 7723-14-0 Division 2 Materials Processing Item Description 1. Floor-mounted fume hoods (walk-in style) with a minimum nominal width of 2.5 meters. 2. Full face-mask air-purifying and air-supplying respirators. 3. Class II biosafety cabinets and glove boxes. 4. Batch centrifuges with a rotor capacity of 4 L or greater, usable with biological materials. 5. Fermenters with an internal volume of 10 L – 20 L, usable with biological materials. 6. Conventional or turbulent air-flow clean-air rooms and self-contained fan-HEPA filter units that may be used for P3 or P4 (BSL 3, BSL 4, L3, L4) containment facilities. 7. Reaction vessels or reactors, with or without agitators, with total internal (geometric) volume greater than 0.1 m³ (100 l) and less than 20 m³ (20000 l). 8. Agitators for use in reaction vessels or reactors specified in item 7. 9. Impellers, blades or shafts designed for agitators specified in item 8. 10. Heat exchangers or condensers with a heat transfer surface area of greater than 0.15 m², and less than 20 m². 11. Tubes, plates, coils or blocks (cores) designed for heat exchangers or condensers specified in item 10. 12. Multiple-seal, single seal and seal-less pumps with manufacturer's specified maximum flow-rate greater than 0.6 m3/h. 13. Valves with nominal sizes greater than 1.0 cm 14. Casings (valve bodies) or preformed casing liners designed for valves specified in item 13. Technical note: The 'nominal size' is defined as the smaller of the inlet and outlet port diameters. 15. Storage tanks, containers or receivers with a total internal (geometric) volume greater than 0.1 m³ (100 l). 16. Distillation or absorption columns of internal diameter greater than 0.1 m. 17. Liquid distributors, vapour distributors or liquid collectors designed for distillation or absorption columns specified in item 16. 18. Vacuum pumps with manufacturer's specified maximum flow-rate greater than 5 m³/h (under standard temperature (273 K (0o C)) and pressure (101.3 kPa) conditions), in which all surfaces that come into direct contact with the chemical(s) being processed are made from any of the following materials: (a) nickel or alloys with more than 40% nickel by weight; (b) alloys with more than 25% nickel and 20% chromium by weight; (c) fluoropolymers (polymeric or elastomeric materials with more than 35% fluorine by weight); (d) glass or glass-lined (including vitrified or enamelled coating); (e) graphite or carbon-graphite; (f) tantalum or tantalum alloys; (g) titanium or titanium alloys; (h) zirconium or zirconium alloys; (i) ceramics; (j) ferrosilicon (high silicon iron alloys); or (k) niobium (columbium) or niobium alloys. Technical note: carbon-graphite is a composition consisting of amorphous carbon and graphite, in which the graphite content is eight percent or more by weight. 19. Casings (pump bodies), preformed casing liners, impellers, rotors or jet pump nozzles designed for vacuum pumps specified in item 18. 20. Laboratory equipment, including parts and accessories for such equipment, for the analysis or detection, destructive or non-destructive, of chemical substances. Note 1. All legislative instruments and compilations are registered on the Federal Register of Legislative Instruments kept under the Legislative Instruments Act 2003. See http://www.frli.gov.au. Notes to the