Skip to main

Vehicle Standard (Australian Design Rule 44/01 – Specific Purpose Vehicle Requirements) 2006

In force
Administered by
  • Department of Infrastructure, Transport, Regional Development, Communications, Sport and the Arts

This item is authorised by the following title:

Superseded version
F2006L0269517 August 2006 - 29 March 2007

This standard was originally made under section 7 of the Motor Vehicle Standards Act 1989 and from 1 July 2021 continues in force as if it were a national road vehicle standard determined under section 12 of the Road Vehicle Standards Act 2018 (see Schedule 3, Part 2, item 2 of the Road Vehicle Standards (Consequential and Transitional Provisions) Act 2018).

This standard repeals each vehicle standard with the name Australian Design Rule 44/01 — Specific Purpose Vehicle Requirements that is: (a) made under section 7 of the Motor Vehicle Standards Act 1989; and (b) in force at the commencement of this standard. This standard also repeals each instrument made under section 7 of the Motor Vehicle Standards Act 1989 that creates a vehicle standard with the name Australian Design Rule 44/01


Downloads

Access downloadable documents for version effective 17 August 2006 - 29 March 2007

Legislative instrument

Explanatory statement

Incorporated by reference

  • ADR 13 – Installation of Lighting and Light-Signalling Devices on other than L-Group Vehicles : s 44.2.5

  • ADR 49 – Front and Rear Position (Side) Lamps, Stop Lamps and End Outline Marker Lamps : s 44.2.1.7.5

  • ADR 6 – Direction Indicators: s 44.2.1.7.5

  • AS 2444 - 1985 “Portable Fire Extinguishers - Selection and Location" : s 44.2.2.5

  • AS 3509-1988 “LP Gas Fuel Vessels for Automotive Use" : s 44.6.2.2

  • AS E38-1962 1 portable Warning Signs for Motor Vehicles’ : s 44.2.2.4.3

  • Australian Standard 1418 “Rules for Cranes", Pan 1 (1977- “General Requirements") and Part 5 (1980- “Mobile Cranes") : s 44.2.2.2.1

  • Australian Standard 1425-1989 “SAA Automotive LP Gas Code" : s 44.6.2.1

  • Vehicle Standard (Australian Design Rule – Definitions and Vehicle Categories) 2005 : s 44.1