Skip to main

Vehicle Standard (Australian Design Rule 63/00 – Trailers Designed for Use in Road Trains) 2006

In force
Administered by
  • Department of Infrastructure, Transport, Regional Development, Communications, Sport and the Arts

This item is authorised by the following title:

Latest version
F2006L0229921 July 2006

This standard was originally made under section 7 of the Motor Vehicle Standards Act 1989 and from 1 July 2021 continues in force as if it were a national road vehicle standard determined under section 12 of the Road Vehicle Standards Act 2018 (see Schedule 3, Part 2, item 2 of the Road Vehicle Standards (Consequential and Transitional Provisions) Act 2018).

This Standard repeals each vehicle standard with the name Australian Design Rule 63/00 — Trailers Designed for Use in Road Trains that is: (a) made under section 7 of the Motor Vehicle Standards Act 1989; and (b) in force at the commencement of this Standard. This Standard also repeals each instrument made under section 7 of the Motor Vehicle Standards Act 1989 that creates a vehicle standard with the name Australian Design Rule


Downloads

Access downloadable documents for version effective 21 July 2006

Legislative instrument

Explanatory statement

Incorporated by reference

  • Australian Standard 1773-1990 "Articulated Vehicles - Fifth Wheel Assemblies" : s63.5.2.1

  • Australian Standard 2213-1984 "50 mm Pin-type Couplings and Drawbar Eyes for Trailers" : s63.5.2.3

  • Vehicle Standard (Australian Design Rule – Definitions and Vehicle Categories) 2005

  • o Australian Standard 2175-1990 "Articulated Vehicles - Kingpins" : s63.2.2