Australian Government Coat of ArmsAustralian Government

Federal Register of Legislation

Vehicle Standard (Australian Design Rule 19/02 – Installation of Lighting and Light Signalling Devices on L-Group Vehicles) 2005

In force
Administered by
  • Department of Infrastructure, Transport, Regional Development, Communications, Sport and the Arts

This item is authorised by the following title:

Superseded version
F2005L0401213 December 2005 - 16 November 2017

This standard was originally made under section 7 of the Motor Vehicle Standards Act 1989 and from 1 July 2021 continues in force as if it were a national road vehicle standard determined under section 12 of the Road Vehicle Standards Act 2018 (see Schedule 3, Part 2, item 2 of the Road Vehicle Standards (Consequential and Transitional Provisions) Act 2018).

This standard repeals each vehicle standard with the name Australian Design Rule 19/02 — Installation of Lighting and Light Signalling Devices on L-Group Vehicles that is: (a) made under section 7 of the Motor Vehicles Standard Act 1989; and (b) in force at the commencement of this Standard. This standard also repeals each instrument made under section 7 of the Motor Vehicles Standard Act 1989 that creates a vehicle standard with th

Downloads

Access downloadable documents for version effective 13 December 2005 - 16 November 2017

Legislative instrument

Word:

1 Volume

PDF:

1 Volume

Explanatory statement

Word:

1 Volume

PDF:

1 Volume

Incorporated by reference

  • ADR 1 – Reversing Lamps: s6.4

  • ADR 46 – Headlamps: s6.4

  • ADR 47 – Retroreflectors: s6.4

  • ADR 49 – Front & Rear Position (Side) Lamps, Stop Lamps, and End Outline Marker Lamps: s6.4

  • ADR 50 – Front Fog Lamps: s6.4

  • ADR 52 – Rear Fog Lamps: s6.4

  • ADR 53 – Front and Rear Position Lamps, Stop Lamps, Direction Indicators and Rear Registration Plate Lamps for L-Group Vehicles: s6.4

  • ADR 54 – Headlamps for Mopeds: s6.4

  • ADR 55 – Headlamps for Motor Cycles: s6.4

  • ADR 6 – Direction Indicatiors: s6.4

  • Australian Design Rule – Definitions and Vehicle Categories: s3

  • UNECE 74 – “UNIFORM PROVISIONS CONCERNING THE APPROVAL OF MOPEDS WITH REGARD TO THE INSTALLATION OF LIGHTING AND LIGHT SIGNALLING DEVICES": s9.2

  • UNECE R53 – “UNIFORM PROVISIONS CONCERNING THE APPROVAL OF CATEGORY L3 VEHICLES (MOTOR CYCLES) WITH REGARD TO THE INSTALLATION OF LIGHTING AND LIGHT SIGNALLING DEVICES": s9.1