Skip to main

Vehicle Standard (Australian Design Rule 8/01 – Safety Glazing Material) 2005

In force
Administered by
  • Department of Infrastructure, Transport, Regional Development, Communications, Sport and the Arts

This item is authorised by the following title:

Superseded version
F2005L0390813 December 2005 - 15 August 2006

This standard was originally made under section 7 of the Motor Vehicle Standards Act 1989 and from 1 July 2021 continues in force as if it were a national road vehicle standard determined under section 12 of the Road Vehicle Standards Act 2018 (see Schedule 3, Part 2, item 2 of the Road Vehicle Standards (Consequential and Transitional Provisions) Act 2018).

This Standard repeals each vehicle standard with the name Australian Design Rule 8/01 — Safety Glazing Material that is: (a) made under section 7 of the Motor Vehicle Standards Act 1989; and (b) in force at the commencement of this Standard. This Standard also repeals each instrument made under section 7 of the Motor Vehicle Standards Act 1989 that creates a vehicle standard with the name Australian Design Rule 8/01 — Safety Glazing


Downloads

Access downloadable documents for version effective 13 December 2005 - 15 August 2006

Legislative instrument

Explanatory statement

Incorporated by reference

  • American National Standard - ANSI Z26.1-1980 - “Safety Code for Safety Glazing Materials for Glazing Motor Vehicles Operating on Land Highways": s8.1.5

  • Australian Design Rule – Definitions and Vehicle Categories: s4

  • Australian Standard AS 2080 -1983 -"Safety Glass for Land Vehicles" up to and including amendment No. 1: s8.1.1

  • British Standards Institution - BS AU178:1980 “Road Vehicle Safety Glass": s8.1.3

  • Japanese Industrial Standard - JIS R 3211-1992 “Safety Glasses for Road Vehicles": s8.1.4

  • New Zealand Standard NZ 5443-1987: s8.1.6

  • UNECE R43/00 - “Uniform Provisions concerning Approval of Safety Glazing and Glazing Materials" Revision 1 of 25 February 1988: s8.1.2