Federal Register of Legislation - Australian Government

Primary content

ADR 23/02 Amdt 1 Standards/Australian Design Rules for Vehicles as made
This instrument amends Vehicle Standard (Australian Design Rule 23/02 – Passenger Car Tyres) 2007 to correct a typographical error and to harmonise the current version of ADR 23/02 with the standard adopted by United Nations - Economic Commission for Europe - Regulation No. 30.
Administered by: DOTARS
Exempt from sunsetting by the Legislative Instruments Act 2003 s 54(2) item 24
Registered 12 Oct 2007
Tabling HistoryDate
Tabled HR12-Feb-2008
Tabled Senate12-Feb-2008
Date of repeal 19 Mar 2014
Repealed by Infrastructure and Regional Development (Spent and Redundant Instruments) Repeal Regulation 2014

 

 

 

 

Vehicle Standard (Australian Design Rule 23/02 – Passenger Car Tyres) 2007 Amendment 1

I, JAMES ERIC LLOYD, Minister for Local Government, Territories and Roads, determine this vehicle standard under subsection 7 (1) of the Motor Vehicle Standards Act 1989.

 

 

 

 

Dated               5th OCTOBER 2007

 

 

 

 

 

 

 

 

 

 

 

[SIGNED]

 

 

 

 

James Eric Lloyd

 

Minister for Local Government, Territories and Roads


 

CONTENTS

 

1.           legislative provisions............................................................................ 3

2.           amendment of vehicle standard...................................................... 3

Schedule 1.................................................................................................................... 4

 


1.                                          legislative provisions

1.1.                                    Name of Legislative Instrument

1.1.1.                              This instrument is the Vehicle Standard (Australian Design Rule 23/02 – Passenger Car Tyres) 2007 Amendment 1.

1.2.                                    Commencement

1.2.1.                              This instrument commences on the day after it is registered.

2.                                          amendment of vehicle standard

2.1.                                    The changes specified in Schedule 1 amend Vehicle Standard (Australian Design Rule 23/02 – Passenger Car Tyres) 2007.

 

 


Schedule 1

[1]               Page 5

Delete the entry at 4.1 to 4.5 and insert the following;

4.1                          For vehicle categories, definitions and meanings used in this standard refer to;

4.1.1                    Australian Design Rules Third Edition;

4.1.2                    Part A, Subpart 4, Terms defined in the Motor Vehicle Standards Act 1989;

4.1.3                    Part B, Subpart 2, Definitions and Vehicle Categories;

4.2                          Section 2 of Appendix A.

[2]               Page 5

Insert the following at Clause 5 - Requirements:

5.5                          Pneumatic tyres shall bear the date of manufacture in the form of a group of four digits, the first two showing the week and the last two the year of manufacture.  The marking shall meet the requirements of Annex 3 – Arrangement of Tyre Markings and may be placed on one side wall only.

[3]               Page 5

            Insert the following footnote to:

Section 3          Markings, clauses 3.1.9.1/ and 3.1.11.1.

 

            1/  See clause 5.5 above for date marking requirements.