
Greenhouse and Energy Minimum Standards (GEMS Regulator) Delegation 2025
I, Daniel Croucher, GEMS Regulator, make the following delegations.
Dated 30 May 2025
Daniel Croucher
GEMS Regulator
Part 1 — Preliminary
1 Name
2 Commencement
3 Authority
4 Definitions
Part 2 — Delegations
5 Delegations relating to functions and powers under the Act
6 Period of delegation
Part 3 — Interaction with other instruments made under the Act
7 Delegation taken to be subsequent
Schedule 1
This instrument is the Greenhouse and Energy Minimum Standards (GEMS Regulator) Delegation 2025.
This instrument commences on 20 September 2022.
Note: Subsection 12(1A) of the Legislation Act 2003 provides that a legislative instrument or notifiable instrument may provide that the instrument, or a provision of the instrument, commences before the instrument is registered. Upon registration of this instrument as a notifiable instrument, this instrument would be a notifiable instrument (see paragraph 11(2)(c) of the Legislation Act 2003).
This instrument is made under section 80 of the Greenhouse and Energy Minimum Standards Act 2012.
In this instrument:
Act means the Greenhouse and Energy Minimum Standards Act 2012.
Delegation period – see section 6.
Under section 80 of the Act, and with the agreement of the State of Victoria, the functions and powers listed in each item of the table in Schedule 1 are delegated to the employees of Energy Safe Victoria who occupied or performed the duties of the positions specified therein during the delegation period.
The delegations referred to in section 5 of this instrument apply for the period 20 September 2022 to 17 September 2024 (the delegation period).
This instrument is to be taken as a subsequent delegation for the purposes of interpreting the application of any revocation clause contained in any previous delegation instrument made under section 80 of the Act.
Note: see Part 2
Item | Statutory provision of the Act | Power/Function | Delegates |
1.
| Subsections 43(1), 43(2), 43(3), and 43(4) | Power to register a product model in accordance with subsection 43(1), or to refuse to register a product model in accordance with subsections 43(2), 43(3) or 43(4).
|
|
2. | Subsection 45(1) | Power to impose conditions on a product model’s registration in accordance with section 45(1). |
|
3. | Subsections 46(2), 46(3) and 46(4) | Power to vary a product model’s registration to cover one or more additional models in accordance with subsection 46(2), or to refuse to vary a product model’s registration to cover one or more additional models in accordance with subsections 46(3) or 46(4). |
|
4. | Subsections 65(1), 65(2), 65(3) | Power to request further specified documentation or information from applicants by written notice, including test reports and to require that documentation or information be verified by statutory declaration. |
|