On the effective date specified below, and for the reasons set out in the background section, the CASA delegate whose signature appears below issues the following Airworthiness Directive (AD) under subregulation 39.001 (1) of CASR. The AD requires that the action set out in the requirement section (being action that the delegate considers necessary to correct an unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in the compliance section.
AD/PA-31/132 | Flap Extension System | 3/2020 |
Applicability: | All Piper PA-31, PA-31-300, PA-31-325, PA-31-350, PA-31T, PA-31T1 and |
Requirement: | Carry out the requirements contained in FAA AD 82-27-13 R2 as in force from time to time (the requirement document). Note 1: Where the requirement document states that the FAA has approved an equivalent method of compliance with a provision of the requirement document, the method of compliance is approved as a means of compliance with this AD in relation to that provision. Note 2: The following Piper Service Documents refer: Piper Service Bulletin 739 Piper Service Bulletin 741 Piper Service Bulletin 494B Piper Service Letter 764A Piper Service Letter 958 Piper Service Letter 959 |
Compliance: | As indicated in the requirement document unless already accomplished. |
| This AD commences on 29 February 2020. |
Background: | This AD replaces the requirements of CASA Airworthiness Directives AD/PA-31/51 Amdt 1, AD/PA-31/101 Amdt 4, and AD/PA-31/102 Amdt 3 which are cancelled, and mandates the requirements of FAA AD 82-27-13 R2. |
Delegate of the Civil Aviation Safety Authority
21 January 2020