I, MARK ALAN SKIDMORE, Director of Aviation Safety, on behalf of CASA, make this instrument under subregulation 30 (3) of the Civil Aviation Regulations 1988.

[Signed M. Skidmore]

Mark Skidmore AM
Director of Aviation Safety

16 January 2015

Civil Aviation Order 104.0 Amendment Order 2015 (No. 1)

1 Name of instrument

 This instrument is the Civil Aviation Order 104.0 Amendment Order 2015 (No. 1).

2 Commencement

 This instrument commences on the day after registration.

3 Amendment of Civil Aviation Order 104.0

 Schedule 1 amends Civil Aviation Order 104.0.

Schedule 1 Amendments

[1] Paragraph 2.1, Note after subparagraph (a) of definition of authority or type rating holder

substitute

Note   The abbreviation WHR is used to denote a class of aircraft comprising Warbird aircraft, Historic aircraft and Replica aircraft and is defined in this section.

 [2] Paragraph 2.1, subparagraph (e) of definition of authority or type rating holder

omit

WHR.

insert

WHR;

[3] Paragraph 2.1, definition of authority or type rating holder

after

the note to paragraph (e)

insert

(f) a category B1 or B2 licence under which the holder carries out Part 1 WHR maintenance in accordance with paragraph 8AA.5.

[4] Paragraph 2.1, definition of excluded type

omit

Appendix 2

insert

Table 2 of Appendix IX of the Part 66 MOS

[5] Paragraph 2.1, definition of excluded type employee

omit

Appendix 2

insert

Table 2 of Appendix IX of the Part 66 MOS

[6] Paragraph 2.1

insert

maintenance training organisation or MTO means a person who holds an approval under regulation 147.030 that is in force.

Part 66 MOS means the Part 66 Manual of Standards issued by CASA under regulation 66.015.

wood and fabric employee means an employee of a COA holder who is a category B1 licence holder, or a category B2 licence holder, engaged in the maintenance of wooden construction aircraft or wooden aircraft components, or the maintenance, replacement and repair of aircraft fabric surfaces, but who is not the holder of an authorisation or rating issued to him or her that applies to that work.

[7] Paragraph 2.1, definition of unlisted WHR

substitute

unlisted turbine-powered WHR means a turbine-powered WHR that is:

(a)      not mentioned in Part 1 or 2 of the table in Appendix 3; or

(b) deemed by paragraph 8.13 to be an unlisted turbine-powered WHR.

[8] Paragraph 4.1

omit everything from and including

issue

insert

carry out maintenance under regulation 42ZC or 42ZD of the Civil Aviation Regulations 1988.

[9] Paragraphs 4.2 to 4.4 (inclusive)

omit

[10] Paragraph 5.5 

omit

commencing the training and assessment mentioned in paragraph 5.3

insert

issuing a certification authorisation to an excluded system employee

[11] Paragraph 5.6 (excluding the Note)

substitute

 5.6If it appears to a COA holder that an employee has, after successfully completing the training and assessment in the excluded system, in accordance with paragraphs 5.3 and 5.4, successfully carried out maintenance under a certification authorisation issued under paragraph 5.1, the COA holder may, after at least 5 months of the authorisation period have elapsed, provide CASA and the employee with a provisional notice in the approved form of satisfactory completion of training and assessment.

 5.7If, not earlier than 3 days before the authorisation period lapses, the COA holder wishes to confirm that the employee has satisfactorily completed their training and assessment, the COA holder must provide CASA and the employee with a confirmation notice in the approved form of satisfactory completion of training.

 5.8A notice referred to in clause 5.7 may be provided by electronic transmission to an address provided by CASA for that purpose.

 5.9An authorisation period of 6 months cannot be extended.

 5.10The purpose of paragraphs 5.6 to 5.8 (inclusive) is to allow CASA to update an employee’s licence to allow him or her to commence carrying out maintenance as soon as practicable after the completion of the 6 month duration of the authorisation issued under paragraph 5.1. Issue of a provisional notice does not mean that a person to whom it is issued is entitled to a confirmation notice of successful completion.

 [12] Paragraph 6.1

omit

Appendix 2

insert

Table 2 of Appendix IX of the Part 66 MOS

[13] Paragraph 6.2

omit everything after

aircraft engine

insert

mentioned in Table 2 of Appendix IX of the Part 66 MOS whose reference is annotated with the words “MTO only”.

[14] Paragraph 6.2, the Note

omit everything from and including

maintenance training organisation (MTO), or by a COA holder to whom regulation 327 of CAR 1988 applies.

insert

MTO.

[15] Paragraph 6.6

omit

commencing the training and assessment mentioned in paragraph 6.3

insert

issuing a certification authorisation to an excluded type employee

[16] Paragraph 6.7 (not including the Note)

substitute

 6.7If it appears to a COA holder that an employee has, after successfully completing the training and assessment in the excluded system, in accordance with paragraphs 6.1, 6.4 and 6.5, successfully carried out maintenance on the excluded type, the COA holder may, after at least 5 months of the authorisation period have elapsed, provide CASA and the employee with a provisional notice in the approved form of satisfactory completion of training and assessment.

 6.8If, not earlier than 3 days before the authorisation period lapses, the COA holder wishes to confirm that the employee has satisfactorily completed their training and assessment, the COA holder must provide CASA and the employee with a confirmation notice in the approved form of satisfactory completion of training.

 6.9A notice referred to in paragraph 6.8 may be provided by electronic transmission to an address referred to in the approved form.

 6.10An authorisation period of 6 months cannot be extended.

 6.11The purpose of paragraphs 6.7 to 6.9 (inclusive) is to allow CASA to update an employee’s licence to allow him or her to continue to have a permission to carry out maintenance, without delay after the completion of the authorisation period. Issue of a provisional notice does not mean that a person to whom it is issued is entitled to a confirmation notice of successful completion.

[17] Paragraph 7.1

omit

Appendix 2

insert

Table 2 of Appendix IX of the Part 66 MOS

[18] Paragraph 7.2

omit everything after

mentioned in

insert

Table 2 of Appendix IX of the Part 66 MOS whose reference is annotated with the words “MTO only”.

[19] Paragraph 7.2, Note

omit

MTO, or by a COA holder to whom regulation 327 of CAR 1988 applies.

insert

MTO.

[20] Paragraph 7.6

omit

permitting the employee to commence the manufacturer’s training and assessment mentioned in paragraph 7.4

insert

issuing a certification authorisation to an excluded type employee

[21] Paragraph 7.7 (including the note)

substitute

 7.7If it appears to a COA holder that an employee has, after successfully completing the training and assessment in the excluded system, in accordance with paragraphs 7.1, 7.4 and 7.5, successfully carried out maintenance on the excluded type, the COA holder may, after at least 5 months of the authorisation period have elapsed, provide CASA and the employee with a provisional notice in the approved form of satisfactory completion of training and assessment.

 7.8If, not earlier than 3 days before the authorisation period lapses, the COA holder wishes to confirm that the employee has satisfactorily completed their training and assessment, the COA holder must provide CASA and the employee with a confirmation notice in the approved form of satisfactory completion of training.

 7.9A notice referred to in paragraph 7.8 may be provided by electronic transmission to an address provided by CASA for that purpose.

 7.10An authorisation period of 6 months cannot be extended.

 7.11The purpose of paragraphs 7.7 to 7.9 (inclusive) is to allow CASA to update an employee’s licence to allow him or her to commence carrying out maintenance without delay after the completion of the authorisation period. Issue of a provisional notice does not mean that a person to whom it is issued is entitled to a confirmation notice of successful completion.

[22] Paragraph 8AA.1

omit

1 October 2014

insert

1 July 2015

[23] Paragraph 8AA.2

omit

30 September 2014

insert

30 June 2015

[24] Subparagraph 8AA.3 (a)

omit

1 October 2014

insert

1 July 2015

[25] New paragraph 8AA.5

after paragraph 8AA.4, insert

 8AA.5In spite of paragraph 8AA.4, a category B1 or B2 licence holder who carried out Part 1 WHR maintenance on an aircraft not more than 2 years before subsection 8 takes effect may continue to carry out such maintenance.

[26] Section 8, Note

omit

CASA 197/13

insert

CASA 277/14

[27] Paragraph 8.6

omit

all words from and including “providing” up to and including “subparagraph 8.5 (b)”

insert

issuing a certification authorisation to an employed authority or type rating holder or reissuing a certification authorisation under paragraph 8.5

[28] Subparagraph 8.9 (b)

omit

category

insert

relevant category for the maintenance

[29] Paragraph 8.12

omit (wherever occurring)

unlisted WHR

insert

unlisted turbine-powered WHR

[30] Paragraph 8.13

omit

unlisted WHR

insert

unlisted turbine-powered WHR

[31] After subsection 9, insert

10 Wood and fabric authorisation

 10.1A COA holder may authorise a wood and fabric employee to carry out maintenance:

(a) of the wooden portion of a wooden construction aircraft or wooden aircraft components; or

(b) that is the replacement, or repair of, aircraft fabric surfaces.

 10.2A maintenance authorisation may only be issued once for the employee, and only for a period of 6 months.

 10.3Before issuing the maintenance authorisation, the COA holder must provide, and the employee must successfully complete, training and assessment in the maintenance of wooden aircraft and wooden aircraft components, or maintenance on, or the replacement and repair, of aircraft fabric surfaces.

 10.4The training and assessment mentioned in paragraph 10.3 must be in accordance with the COA holder’s Quality Control Manual as approved in writing by CASA for training and assessment in one of the subjects mentioned in paragraph 10.3 and of a standard equivalent to whichever of the following Australian Qualifications Framework units is applicable:

(a) MEA 357A (inspect, test and repair fabric surfaces);

(b) MEA 358A (re-cover aircraft fabric surfaces);

(c) MEA 359A (inspect and repair aircraft wooden structures).

 10.5Before issuing a maintenance authorisation of the kind referred to in paragraph 10.1, the COA holder must be, in respect of the maintenance to be performed by the employee:

(a) a CASA delegate for subregulation 42ZC (6) of CAR 1988 who may authorise a person for paragraph 42ZC (3) (d) or (4) (e) of CAR 1988 (as the case requires);

(b) an authorised person for subregulation 42ZC (7) of CAR 1988, who may authorise a person for paragraph 42ZC (3) (d) of CAR 1988.

 10.6 If it appears to a COA holder that an employee has, after successfully completing training and assessment in accordance with paragraph 10.3, successfully carried out maintenance under an authorisation issued under paragraph 10.1, the COA holder may, after at least 5 months of the authorisation period have elapsed, provide CASA and the employee with a provisional notice in the approved form of satisfactory completion of training and assessment.

 10.7 If, not earlier than 3 days before the authorisation period lapses, the COA holder wishes to confirm that an employee has satisfactorily completed their training and assessment, the COA holder must provide CASA and the employee with a confirmation notice in the approved form of successful completion of training.

 10.8 A notice referred to in clause 10.6 may be provided by electronic transmission to an address provided by CASA for that purpose.

 10.9 An authorisation period of 6 months cannot be extended.

 10.10The purpose of paragraphs 10.1-10.8 is to allow CASA to update an employee’s licence to allow him or her to commence carrying on maintenance, without delay, after the completion of the authorisation period. Issue of a provisional notice does not mean that a person to whom it is issued is entitled to a confirmation notice of successful completion.

[32] Appendix 1, Note

omit

Excluded (second occurring)

insert

Excluding

[33] Appendix 2

omit

[34] Appendix 3, Part 2

omit

Auster series

Piston (various types)

B1.2; B2

Piper Cub series

Piston (various types)

B1.2; B2

Cessna 100, 200 series

Piston (various types)

B1.2; B2

Taylorcraft

Piston (various types)

B1.2; B2

[35] Appendix 3, Part 2

after

Antonov AN2 Colt

Shvetsov

B1.2; B2

insert

Auster series

Piston (various types)

B1.2; B2

[36] Appendix 3, Part 2

after

BA/Klemm L-25 Swallow

Continental

B1.2; B2

insert

Bell 47

Lycoming

B1.4; B2

[37] Appendix 3, Part 2

after

Cessna L19/305 Bird Dog

Cont. O-470

B1.2; B2

insert

Cessna 100, 200 series

Piston (various types)

B1.2; B2

[38] Appendix 3, Part 2

after

Douglas DC4

PW R-2000

B1.2; B2

insert

Extra 300L

Lycoming AEIO540

B1.2; B2

[39] Appendix 3, Part 2

omit

Menasco Pirate, Gypsy Major

Insert

Kinner, Gypsy Major, Menasco Pirate

[40] Appendix 3, Part 2

after

Percival Provost Mk1

Alvis Leonides

B1.2; B2

insert

Piper Cub series

Piston (various types)

B1.2; B2

[41] Appendix 3, Part 2

after

Supermarine Spitfire

RR/Packard Merlin

B1.2; B2

insert

Taylorcraft

Piston (various types)

B1.2; B2

Vought/Goodyear

Cosair (all variants)

B1.2; B2

[42] Appendix 3, Part 2

after

Vultee BT 13

P&W R-985

B1.2; B2

insert

Yakovlev Yak-3

P&W R2000; Klimov

B1.2; B2