Currency (Royal Australian Mint) Determination 2014 (No. 7)

I, Steven Ciobo, Parliamentary Secretary to the Treasurer, make the following determination under paragraph 13(2)(b) and subsection 13A(1) of the Currency Act 1965.

Dated  23 October 2014

Steven Ciobo

Parliamentary Secretary to the Treasurer

 

 

 

 

Contents

1 Name of determination

2 Commencement

3 Authority

4 Definitions

5 Specification of denominations and standard compositions

6 Standard weight, design and dimension of coins

Schedule 1—Standard weight, design and dimension of coins 3

Part 1—Specifications of coins 3

1 Specifications..........................................3

Part 2—Explanation of symbols 5

2 Symbols used in Part 1....................................5

1  Name of determination

  This determination is the Currency (Royal Australian Mint) Determination 2014 (No. 7).

2  Commencement

  This determination commences on the day after it is registered.

3  Authority

  This determination is made under paragraph 13(2)(b) and subsection 13A(1) of the Currency Act 1965.

4  Definitions

  In this determination:

Act means the Currency Act 1965.

5  Specification of denominations and standard compositions

 (1) This section is made for paragraph 13(2)(b) of the Act.

 (2) The Act has effect, on and after the day on which this determination commences, as if:

 (a) there were included in the Schedule to the Act the references to denominations of money specified in Part 1 of Schedule 1 to this determination; and

 (b) there were specified in the Schedule to the Act opposite to each such denomination, as the standard composition of coins of that denomination, the standard composition specified for the denomination in Part 1 of Schedule 1 to this determination.

 (3) This section does not affect any other determination made for paragraph 13(2)(b) of the Act.

6  Standard weight, design and dimension of coins

 (1) This section is made for subsection 13A(1) of the Act.

 (2) On and after the day when this determination commences, each item of the table in Part 1 of Schedule 1 specifies the standard weight, the allowable variation from that standard weight, the design and the dimensions of a coin whose denomination is specified, or taken to be specified in the Schedule to the Act.

 (3)   A reference in Schedule 1 to the maximum diameter or other dimension of a coin is, for a coin that is rectangular with rounded corners, a reference to the length and width of the coin.

  (4)  A reference in Schedule 1 to the maximum diameter or other dimension of a coin is, for a coin that is triangular with rounded corners, a reference to the perpendicular bisector of the coin.

 (5) Each item of the table in Part 2 of Schedule 1 explains a symbol used to describe the design of coins specified in Part 1 of Schedule 1.

 (6) This section does not affect any other determination made under subsection 13A(1) of the Act.

Schedule 1Standard weight, design and dimension of coins

Note: See sections 5 and 6.

Part 1Specifications of coins

 

1  Specifications

  Each item of the following table specifies the standard weight, the allowable variation from that standard weight, the design and the dimensions of a coin.

 

Specifications of coins

Item

Denomination

Standard composition

Standard weight and allowable variation (g)

Maximum diameter (mm) or other dimension

Maximum thickness (mm)

Shape

Edge

Obverse

Reverse

1

$5

Aluminium, zinc and bronze

20.00 ± 1.00

39.00

2.85

S1

E1

O1

R1

2

$5

At least 99.9% silver

31.103 + 3.00

32.30

5.60

S1

E1

O2

R2

3

$1

At least 99.9% silver

31.103 + 3.00

40.50

3.80

S1

E1

O3

R3

 

4

$10

At least 99.9% silver

155.51 + 3.00

65.50

6.00

S1

E1

O3

R4

 

5

$30

At least 99.9% silver

1000.00 + 9.50

100.90

14.50

S1

E1

O3

R5

 

6

$100

At least 99.99% gold

31.103 + 1.50

39.00

2.70

S1

E1

O3

R6

 

7

$500

At least 99.99% gold

155.51 + 1.80

61.00

4.30

S1

E1

O3

R7

 

8

$3000

At least 99.99% gold

1000.00 + 3.00

75.30

14.00

S1

E1

O3

R8

 

9

$5

At least 99.9% silver

31.103 + 3.00

40.50 x 28.50

3.90

S2

E2

O4

R9

 

10

50c

Copper and nickel

15.55 ± 0.96

31.70

3.16

S3

E2

O2

R10

11

50c

Copper and nickel

15.55 ± 0.96

31.70

3.16

S3

E2

O2

R11

12

50c

Copper and nickel

15.55 ± 0.96

31.70

3.16

S3

E2

O2

R12

13

20c

Copper and nickel

11.30 ± 0.33

28.65

2.52

S1

E1

O2

R13

14

20c

Copper and nickel

11.30 ± 0.33

28.65

2.52

S1

E1

O2

R14

15

20c

Copper and nickel

11.30 ± 0.33

28.65

2.52

S1

E1

O2

R15

16

20c

Copper and nickel

11.30 ± 0.33

28.65

2.52

S1

E1

O2

R16

17

20c

Copper and nickel

11.30 ± 0.33

28.65

2.52

S1

E1

O2

R17

18

20c

Copper and nickel

11.30 ± 0.33

28.65

2.52

S1

E1

O2

R18

19

20c

Copper and nickel

11.30 ± 0.33

28.65

2.52

S1

E1

O2

R19

20

20c

Copper and nickel

11.30 ± 0.33

28.65

2.52

S1

E1

O2

R20

21

20c

Copper and nickel

11.30 ± 0.33

28.65

2.52

S1

E1

O2

R21

22

50c

Copper and nickel

15.55 ± 0.96

31.70

3.16

S3

E2

O2

R22

23

$5

At least 99.9% silver

22.23 ± 1.00

34.40

3.80

S4

E2

O5

R23

24

$5

At least 99.9% silver

22.23 ± 1.00

34.40

3.80

S4

E2

O5

R24

25

$1

Copper, aluminium and nickel

9.00 ± 0.66

25.20

3.46

S1

E3

O2

R25

 

 

 

Part 2Explanation of symbols

 

2  Symbols used in Part 1

  Each item of the following table contains an explanation of a symbol used in Part 1 of this Schedule to describe the shape, edge design, obverse design and reverse design of a coin.

 

Explanation of symbols used in Part 1

Item

Design Feature

Symbol

Explanation

1

Shape

S1

Circular

2

Shape

S2

Rectangular with rounded corners

3

Shape

S3

Dodecagonal

4

Shape

S4

Triangular with rounded corners

5

Edge

E1

Continuously milled

6

Edge

E2

Plain

7

Edge

E3

Interrupted milling

8

Obverse

O1

A design consisting of:

(a)       in the centre, an effigy of Queen Elizabeth II and the inscription ‘IRB’, surrounded by the following:

(i)     ‘ELIZABETH II’;

(ii)     ‘AUSTRALIA’;

(iii)     the inscription, in numerals, of a year;

(iv)     Arabic numerals for the amount, in dollars, of the denomination of the coin, followed by ‘DOLLAR’, or ‘DOLLARS’ as the case requires;

(v)     2 representations of a dot; and

(b)       around the outer circle of the coin, a wreath of wattle leaves and flowers; and   

(c)       at the top of the face of the coin, a representation of a kookaburra; and

(d)       at the bottom of the face of the coin, a representation of a frill-necked lizard

9

Obverse

O2

A design consisting of an effigy of Queen Elizabeth II and the following:

(a)      ‘ELIZABETH II’;

(b)     ‘AUSTRALIA’;

(c)      the inscription, in numerals, of a year;

(d)     ‘IRB’

10

Obverse

O3

A design consisting of an octagon containing an effigy of Queen Elizabeth II and the following:

(a)      ‘ELIZABETH II’;

(b)     ‘AUSTRALIA’;

(c)      the inscription, in numerals, of a year;

(d)     Arabic numerals for the amount, in dollars, of the denomination of the coin, followed by ‘DOLLAR’, or ‘DOLLARS’ as the case requires;

(e)      ‘IRB’

11

Obverse

O4

A rectangular design consisting of an effigy of Queen Elizabeth II and the following:

(a)      ‘ELIZABETH II’;

(b)     ‘AUSTRALIA’;

(c)      the inscription, in numerals, of a year;

(d)     Arabic numerals for the amount, in dollars, of the denomination of the coin, followed by ‘DOLLAR’, or ‘DOLLARS’ as the case requires;

(e)      ‘IRB’;

(f)       an ornamental border, immediately inside the rim of the coin, comprising:

(i)     4 irregular shapes containing stylised representations of flowers; and

(ii)     4 stylised representations of a flower 

12

Obverse

O5

A triangular design consisting of an effigy of Queen Elizabeth II and the following:

(a)      ‘ELIZABETH II’;

(b)     ‘AUSTRALIA’;

(c)      the inscription, in numerals, of a year;

(d)     Arabic numerals for the amount, in dollars, of the denomination of the coin, followed by ‘DOLLAR’, or ‘DOLLARS’ as the case requires;

(e)      ‘IRB’

13

Reverse

R1

A design consisting of:

(a)      a central circle containing a stylised coloured representation of each of the following:

(i)     a road train and the Ghan train;

(ii)     a traditional Australian Aboriginal holding a spear;

(iii)     an Australian soldier holding a rifle;

(iv)     Andrew Barton Paterson;

(v)     Ned Kelly holding a gun;

(vi)     a traditional Australian Aboriginal playing a didgeridoo;

(vii)     a traditional Australian Aboriginal throwing a boomerang;

(viii)     a male surf lifesaver holding the Australian flag;

(ix)     a swagman holding a pan and kneeling next to a billy and a pick;

(x)     Nancy-Bird Walton;

(xi)     a female and a male;

(xii)     Sir Douglas Mawson;

(xiii)     a female surfer standing with a surf board;

(xiv)     people playing Australian Rules football;

(xv)     a part of a cricket bat;

(xvi)     2 people riding camels;

(xvii)     flies;

(xviii)     an aerosol container;

(xix)     mountainous landscapes, a desert landscape, a body of water, the sky and clouds; and

(b)     a representation of a biplane with red cross insignia, containing a waiving passenger and pulling a banner with the words I LOVE A SUNBURNT COUNTRY’; and

(c)      a representation of a Qantas aeroplane; and

(d)     a representation of clouds; and

(e)      a representation of Sydney Opera House and the Torres Strait Islander flag; and

(f)       a representation of the Sydney Harbour Bridge; and

(g)     a representation of 5 kangaroos in a landscape with soil, vegetation and a shore; and

(h)     in the foreground a representation of a ribbon containing the words ‘DISTINCTLY AUSTRALIAN

14

Reverse

R2

A design consisting of:

(a)      a representation of a crocodile crawling on soil; and

(b)     the following:

(i)     SALTWATER CROCODILE’;

(ii)     1oz .999 Ag’;

(iii)     ‘AGRO JUNIOR – FIVE DOLLARS’;

(iv)     a stylised representation of the designer’s initials ‘BK’

15

Reverse

R3

A design consisting of:

(a)      in the foreground, a stylised representation of a diamond shaped road sign, including a representation of an emu; and

(b)     in the background, a line drawing of an octagon; and

(c)      in the upper right sector and partially covered by the road sign – a stylised representation of the Southern Cross; and

(d)     the following:

(i)     1 oz .999 Ag

16

Reverse

R4

A design consisting of:

(a)      in the foreground, a stylised representation of a diamond shaped road sign, including a representation of an emu; and

(b)     in the background, a line drawing of an octagon; and

(c)      in the upper right sector and partially covered by the road sign – a stylised representation of the Southern Cross; and

(d)     the following:

(i)      ‘5 oz .999 Ag’

17

Reverse

R5

A design consisting of:

(a)       in the foreground, a stylised representation of a diamond shaped road sign, including a representation of an emu; and

(b)     in the background, a line drawing of an octagon; and

(c)      in the upper right sector and partially covered by the road sign – a stylised representation of the Southern Cross; and

(d)     the following:

(i)      ‘1 kg .999 Ag’

18

Reverse

R6

A design consisting of:

(a)      in the foreground, a stylised representation of a diamond shaped road sign, including a representation of an emu; and

(b)     in the background, a line drawing of an octagon; and

(c)      in the upper right sector and partially covered by the road sign – a stylised representation of the Southern Cross; and

(d)     the following:

(i)      ‘1 oz .9999 Au’

19

Reverse

R7

A design consisting of:

(a)      in the foreground, a stylised representation of a diamond shaped road sign, including a representation of an emu; and

(b)     in the background, a line drawing of an octagon; and

(c)      in the upper right sector and partially covered by the road sign – a stylised representation of the Southern Cross; and

(d)     the following:

(i)      ‘5 oz .9999 Au’

20

Reverse

R8

A design consisting of:

(a)      in the foreground, a stylised representation of a diamond shaped road sign, including a representation of an emu; and

(b)     in the background, a line drawing of an octagon; and

(c)      in the upper right sector and partially covered by the road sign – a stylised representation of the Southern Cross; and

(d)     the following:

(i)      ‘1 kg .9999 Au’

21

Reverse

R9

A rectangular design consisting of:

(a)      a stylised representation of a part of the 1927 issue of the Magna Carta, including the Latin text meaning ‘We furthermore grant and give to all the free men of our realm for ourselves and our heirs in perpetuity the liberties written below to have and to hold to them and their heirs from us and our heirs in perpetuity’; and

(b)     surrounding the Magna Carta, an ornamental border that is in turn surrounded by the following:

(i)     4 irregular shapes containing stylised representations of flowers;

(ii)     4 stylised representations of a flower; and

(c)      at the bottom of the coin and partially obscuring the border, a stylised representation of a rope that is twisted to form a diamond shape and a circular shape; and

(d)     within the circular shape, a stylised representation of a person holding an object in each hand; and

(e)      the following:

(i)     ‘MAGNA CARTA 1297’; and

(f)       a stylised representation of the designer’s initials ‘AB’

22

Reverse

R10

A design consisting of:

(a)      a representation of 122 dodecagons, of which:

(i)     35 are shaded and raised and positioned as a stylised representation of the number ‘50’; and

(ii)     8 are shaded and raised and positioned in an irregular pattern; and

(iii)     79 contain variations of orange colour or yellow colour and are positioned in an irregular pattern; and

(b)     the following:

(i)     ‘ANNIVERSARY OF THE ROYAL AUSTRALIAN MINT’;

(ii)     ‘1965’;

(iii)     ‘2015’;

(iv)     the designer’s initials ‘AS’

23

Reverse

R11

A design consisting of:

(a)      a representation of persons descending in parachutes towards a hilly landscape; and

(b)     representations of parachutes; and

(c)      3 representations of Junkers Ju 52 aircraft; and

(d)     representations of smoke; and

(e)      a representation of 2 pillars supporting the remains of a building;

(f)       a representation of an anti-aircraft gun positioned next to sandbags, temporary structures and barbed wire; and

(g)     a representation of a soldier in a standing position, facing right; and

(h)     a representation of a soldier in a sitting position, facing right; and

(i)       a representation of a soldier in a standing position, facing right and holding an artillery shell; and

(j)       a representation of a soldier, facing right and looking through binoculars; and

(k)     the following:

(i)     ‘CRETE’;

(ii)     ‘1941’;

(iii)     ‘50’;

(iv)     a stylised representation of the designer’s initials ‘EJL.’

24

Reverse

R12

A design consisting of:

(a)       a representation of the arms of the Commonwealth; and

(b)       the following:

(i)     ‘50’;

(ii)     the designer’s initials ‘SD’;

(iii)     ‘C’

25

Reverse

R13

A design consisting of:

(a)      a representation of an AE2 submarine positioned on water; and

(b)     the silhouette of a seaman standing and a seaman sitting on that submarine; and

(c)      raised beads inside the rim of the coin; and

(d)     the following:

(i)     ‘WWI – ROYAL AUSTRALIAN NAVY’;

(ii)     ‘20’

26

Reverse

R14

A design consisting of:

(a)      a representation of a light-horseman riding a horse; and

(b)     in the background, a representation of hilly terrain; and

(c)      in the foreground, a representation of soil; and

(d)     raised beads inside the rim of the coin; and

(e)      the following:

(i)     WWI – LIGHT HORSEMEN’;

(ii)     ‘20’

27

Reverse

R15

A design consisting of:

(a)      a representation of a woman, wearing a long dress and a hat and holding a bundle of folded blankets; and

(b)     in the background, a representation of a room with arched windows; and

(c)      a stylised representation of bundles of folded blankets and folded clothing, positioned on tables; and

(d)     raised beads inside the rim of the coin; and

(e)      the following:

(i)     ‘WWI – HOME FRONT’;

(ii)     ‘20’

28

Reverse

R16

A design consisting of:

(a)      a silhouette of an Australian Navy seaman superimposed on a part of a silhouette of an Australian Army soldier that is in turn superimposed on a part of a silhouette of an Australian Flying Corps airman; and

(b)     a stylised representation of 3 poppies; and

(c)      raised beads inside the rim of the coin; and

(d)     the following:

(i)     ‘WWI – REMEMBRANCE DAY’;

(ii)     ‘20’

29

Reverse

R17

A design consisting of:

(a)      a stylised representation of a part of the Hall of Memory at the Australian War Memorial in Canberra, including a stylised representation of the tomb of the unknown Australian soldier; and

(b)     a silhouette of a soldier standing with his rifle and facing right; and

(c)      raised beads inside the rim of the coin; and

(d)     the following:

(i)     ‘WWI – THE UNKNOWN SOLDIER’;

(ii)     ‘20’

30

Reverse

R18

A design consisting of:

(a)      a representation of a trench including sandbags; and

(b)     on the left, a representation of 3 soldiers resting against the trench wall; and

(c)      on the right, a representation of a soldier with a rifle slung over his shoulder and a soldier resting against the trench wall; and

(d)     raised beads inside the rim of the coin; and

(e)      the following:

(i)     ‘WWI – AUSTRALIAN IMPERIAL FORCE’;

(ii)     ‘20’

31

Reverse

R19

A design consisting of:

(a)      a representation of a donkey; and

(b)     a silhouette of a soldier riding that donkey and holding on to a silhouette of a soldier standing next to that donkey; and

(c)      in the background, a silhouette of hilly terrain; and 

(d)     raised beads inside the rim of the coin; and

(e)      the following:

(i)     ‘WWI – WARTIME ANIMALS’;

(ii)     ‘20’

32

Reverse

R20

A design consisting of:

(a)       a representation of 5 soldiers resting against the rail of a ship; and

(b)       in the background, the following:

(i)     a representation of a soldier standing;

(ii)     a representation of a soldier standing on the rail of the ship and holding on to a pole; and

(c)       in the foreground, a representation of streamers; and

(d)       raised beads inside the rim of the coin; and

(e)       the following:

(i)     ‘WWI 1914-1918’;

(ii)     ‘20’

33

Reverse

R21

A design consisting of:

(a)      a representation of a trench; and

(b)     positioned inside that trench, the following:

(i)     a representation of a person wearing a hat, holding binoculars and resting his leg on the wall of the trench;

(ii)     a representation of a person standing, wearing a hat and holding binoculars;

(iii)     a representation of a person wearing a hat, resting on the wall of the trench and looking through a telescope; and

(c)      in the background, a representation of a battlefield including damaged tree trunks; and

(d)     in the foreground, a stylised representation of soil; and

(e)      raised beads inside the rim of the coin; and

(f)       the following:

(i)     ‘WWI – WAR CORRESPONDENTS’;

(ii)     ‘20’

34

Reverse

R22

A design consisting of:

(a)      on the left of the coin, a stylised representation of King Leonidas standing on rocky terrain, wearing a helmet, holding a sword with his right hand and holding a shield on his left arm; and

(b)     in the foreground, a representation of a soldier positioned behind rocks and holding a rifle; and

(c)      in the background, a representation of a hilly landscape and the following:

(i)     a representation of 2 soldiers;

(ii)     a stylised representation of 2 buildings;

(iii)     a representation of a river;

(iv)     a representation of trees and shrubs;

(v)     representations of smoke; and

(d)     the following:

(i)     GREECE’;

(ii)     ‘1941’;

(iii)     50’;

(iv)     a stylised representation of the designer’s initials ‘EJL.’

35

Reverse

R23

A triangular design consisting of:

(a)      in the foreground:

(i)     a representation of 2 soldiers, each carrying a rifle; and

(ii)     a representation of a wounded soldier being carried by those 2 soldiers; and

(iii)     a representation of soil; and

(b)     in the background, a coloured representation of a part of a map of the world including a dot and the following inscriptions:

(i)     ‘ANZAC COVE’;

(ii)     ‘MEDITERRANEAN SEA’;

(iii)     TURKEY; and

(c)      the following:

(i)     ‘ANZAC DAY 1915-2015’;

(ii)     ‘5 DOLLARS’

36

Reverse

R24

A triangular design consisting of:

(a)      in the foreground:

(i)     a representation of 2 soldiers, each carrying a rifle; and

(ii)     a representation of a wounded soldier being carried by those 2 soldiers; and

(iii)     a representation of soil; and

(b)     in the background, a representation of a part of a map of the world including a dot and the following inscriptions:

(i)     ‘ANZAC COVE’;

(ii)     ‘MEDITERRANEAN SEA’;

(iii)     TURKEY; and

(c)      stylised representations of soil; and

(d)     the following:

(i)     ‘ANZAC DAY 1915-2015’;

(ii)     ‘5 DOLLARS’

37

Reverse

R25

A design consisting of:

(a)      a stylised representation of 5 kangaroos; and

(b)     a circle enclosing a stylised representation of a man wearing a hat, facing right and walking; and

(c)      the following:

(i)     ‘1 DOLLAR’