Vehicle Standard (Australian Design Rule 25/0025/00 – Anti-Theft LockAnti-Theft Lock) 20062006 Amendment 11

I, JAMES ERIC LLOYD, Minister for Local Government, Territories and Roads, determine this vehicle standard under subsection 7 (1) of the Motor Vehicle Standards Act 1989.

Dated  5 December 2006

[SIGNED]

James Eric Lloyd

Minister for Local Government, Territories and Roads

CONTENTS

1. legislative provisions..............................................

2. amendment of vehicle standard......................................

Schedule 1.............................................................

1. legislative provisions
   1.                                  Name of Legislative Instrument
      1.                            This instrument is the Vehicle Standard (Australian Design Rule 25/00 – Anti-Theft Lock) 2006 Amendment 1.
   2.                                  Commencement
      1.                            This instrument commences on the day after it is registered.
2. amendment of vehicle standard
   1.                                  The changes specified in Schedule 1 amend Vehicle Standard (Australian Design Rule 25/00 – Anti-Theft Lock) 2006.

Schedule 1

[1]               Clause 25.1.2, replace “positron” with “position”.

[2]               Clause 25.2.5, replace “lock m the” with “lock in the”.

[3]               Clause 25.2.6.2, replace “engine-off” with “engine off”.