Vehicle Standard (Australian Design Rule 5/015/01 – Anchorages for Seatbelts and Child RestraintsAnchorages for Seatbelts and Child Restraints) 20062006 Amendment 11

I, JAMES ERIC LLOYD, Minister for Local Government, Territories and Roads, determine this vehicle standard under subsection 7 (1) of the Motor Vehicle Standards Act 1989.

Dated  5 December 2006

[SIGNED]

James Eric Lloyd

Minister for Local Government, Territories and Roads

CONTENTS

1. legislative provisions..............................................

2. amendment of vehicle standard......................................

Schedule 1.............................................................

1. legislative provisions
   1.                                  Name of Legislative Instrument
      1.                            This instrument is the Vehicle Standard (Australian Design Rule 5/01 – Anchorages for Seatbelts and Child Restraints) 2006 Amendment 1.
   2.                                  Commencement
      1.                            This instrument commences on the day after it is registered.
2. amendment of vehicle standard
   1.                                  The changes specified in Schedule 1 amend Vehicle Standard (Australian Design Rule 5/01 – Anchorages for Seatbelts and Child Restraints) 2006.

Schedule 1

[1]               Clause 5.2.4, replace “Torn” with “Torso”.

[2]               Clause 5.2.8.2, replace the full stop after “simultaneously” with a comma.

[3]               Clause 5.3.8.4, replace “‘Ana B’” with “‘Area B’”.

[4]               Clause 5.3.9, replace “’Scat” with “’Seat”.

[5]               Clause 5.4.1.2, replace “25o” with “25o”.

[6]               Clause 5.4.3.2.3, replace “move” with “more”.

[7]               Clause 5.5.1, replace “Hinges-“ with “Hinges-““.