Vehicle Standard (Australian Design Rule 3/003/00 – Seat AnchoragesSeat Anchorages) 20062006 Amendment 11

I, JAMES ERIC LLOYD, Minister for Local Government, Territories and Roads, determine this vehicle standard under subsection 7 (1) of the Motor Vehicle Standards Act 1989.

Dated  5 December 2006

[SIGNED]

James Eric Lloyd

Minister for Local Government, Territories and Roads

CONTENTS

1. legislative provisions..............................................

2. amendment of vehicle standard......................................

Schedule 1.............................................................

1. legislative provisions
   1.                                  Name of Legislative Instrument
      1.                            This instrument is the Vehicle Standard (Australian Design Rule 3/00 – Seat Anchorages) 2006 Amendment 1.
   2.                                  Commencement
      1.                            This instrument commences on the day after it is registered.
2. amendment of vehicle standard
   1.                                  The changes specified in Schedule 1 amend Vehicle Standard (Australian Design Rule 3/00 – Seat Anchorages) 2006.

Schedule 1

[1]               Purpose and Scope, replace “pert” with “part” and replace “`’Seats’” with “’Seats’”.

[2]               Applicability, delete “on”.

[3]               Clause 3.2.1.3, replace “’Sear’” with “’Seat’”, and replace “’Seat’” with “’Seat’”.

[4]               Clause 3.2.2, replace “Clams” with “Clauses”.

[5]               Clause 3.2.3, replace “’Sear” with “’Seat’”.

[6]               Clause 3.2.3.0, replace “’Sear’” with “’Seat’”.