Vehicle Standard (Australian Design Rule 46/00 - Headlamps) 2006
- Department of Infrastructure, Transport, Regional Development, Communications, Sport and the Arts
This item is authorised by the following title:
Downloads
Legislative instrument
Word:
1 VolumePDF:
1 VolumeExplanatory statement
Word:
1 VolumePDF:
1 VolumeIncorporated by reference
ADR 13 – Installation of Lighting and Light Signalling Devices on Other than L-Group Vehicles : s2.1
ADR 19 – Installation of Lighting and Light Signalling Devices on L-Group Vehicles : s2.1
ADR 51 – Filament Lamps : s8.2
ADR 67 – Installation of Lighting and Light Signalling Devices on Three-Wheeled Vehicles : s2.1
Japanese Industrial Standard D5500-1995, “Lighting and Signalling Equipment for Automobiles" : s7.8
SAE Standard J579c, December 1978, “Sealed Beam Headlamp Units for Motor Vehicles" : s7.7
UNECE Regulation 112 – UNIFORM PROVISIONS CONCERNING THE APPROVAL OF MOTOR VEHICLE HEADLAMPS EMITTING AN ASYMMETRICAL PASSING BEAM OR A DRIVING BEAM OR BOTH AND EQUIPPED WITH FILAMENT LAMPS, incorporated under the 00 series of amendments : s7.6
UNECE Regulation 113 – UNIFORM PROVISIONS CONCERNING THE APPROVAL OF MOTOR VEHICLE HEADLAMPS EMITTING A SYMMETRICAL PASSING BEAM OR A DRIVING BEAM OR BOTH AND EQUIPPED WITH FILAMENT LAMPS, incorporated under the 00 series of amendments : s7.7
UNECE Regulation No 1 – UNIFORM PROVISIONS CONCERNING THE APPROVAL OF MOTOR VEHICLE HEADLAMPS EMITTING AN ASSYMERICAL PASSING BEAM AND/OR A DRIVING BEAM AND EQUIPPED WITH FILAMENT LAMPS OF CATEGORY R2 AND /OR from the edition incorporating the 01 series of amendments : s7.1
UNECE Regulation No 20 – UNIFORM PROVISIONS CONCERNING THE APPROVAL OF MOTOR VEHICLE HEADLAMPS EMITTING AN ASSYMERICAL PASSING BEAM OR A DRIVING BEAM OR BOTH AND EQUIPPED WITH HALOGEN FILAMENT LAMPS (H4 LAMPS) from the edition incorporating the 01 series of amendments and up to the edition incorporating the 02 series of amendments : s7.4
UNECE Regulation No 31 – UNIFORM PROVISIONS CONCERNING THE APPROVAL OF HALOGEN SEALED BEAM UNIT (HSB) MOTOR VEHICLE HEADLAMPS EMITTING AN ASSYMERICAL PASSING BEAM OR A DRIVING BEAM OR BOTH from the edition incorporating the 01 series of amendments and up to the edition incorporating the 02 series of amendments : s7.5
UNECE Regulation No 5 – UNIFORM PROVISIONS FOR THE APPROVAL OF MOTOR VEHICLE “SEALED BEAM HEADLAMPS" EMITTING AN ASSYMERICAL PASSING BEAM AND/OR A DRIVING BEAM OR BOTH from the edition incorporating the 01 series of amendments : s7.2
UNECE Regulation No 8 – UNIFORM PROVISIONS CONCERNING THE APPROVAL OF MOTOR VEHICLE HEADLAMPS EMITTING AN ASSYMERICAL PASSING BEAM OR A DRIVING BEAM OR BOTH AND EQUIPPED WITH HALOGEN FILAMENT LAMPS (H1, H2, H3, HB3, HB4, H7, H8 and/or H1R1) from the edition incorporating the 03 series of amendments up to and including the edition incorporating the 04 series of amendments : s7.3
This standard was originally made under section 7 of the Motor Vehicle Standards Act 1989 and from 1 July 2021 continues in force as if it were a national road vehicle standard determined under section 12 of the Road Vehicle Standards Act 2018 (see Schedule 3, Part 2, item 2 of the Road Vehicle Standards (Consequential and Transitional Provisions) Act 2018).
This standard repeals each vehicle standard with the name Australian Design Rule 46/00 — Headlamps that is: (a) made under section 7 of the Motor Vehicle Standards Act 1989; and (b) in force at the commencement of this standard. This standard also repeals each instrument made under section 7 of the Motor Vehicle Standards Act 1989 that creates a vehicle standard with the name Australian Design Rule 46/00 — Headlamps, if there are no