The AUSTRALIAN COMMUNICATIONS AUTHORITY makes this Technical Standard under subsection 376 (1) of the Telecommunications Act 1997.
Dated 15 December 2004
R HORTON
Chair
A HORSLEY
Deputy Chair
Australian Communications Authority
1 Name of Technical Standard
(1) This Technical Standard is the Telecommunications Technical Standard (Analogue interworking and non‑interference requirements for Customer Equipment for connection to the Public Switched Telephone Network — AS/ACIF S002) Amendment 2004 (No. 1).
(2) This amendment of a technical standard may also be cited as AS/ACIF S002‑2001 (Amdt 1).
2 Commencement
This Technical Standard commences on the date of its notification in the Gazette.
3 Amendment of Telecommunications Technical Standard (Analogue interworking and non-interference requirements for Customer Equipment for connection to the Public Switched Telephone Network — AS/ACIF S002) 2001
Schedule 1 amends the Telecommunications Technical Standard (Analogue interworking and non-interference requirements for Customer Equipment for connection to the Public Switched Telephone Network — AS/ACIF S002) 2001.
Schedule 1 Amendments
(section 3)
[1] Section 1, notes 1 and 2
substitute
Note 1 The alternate citation mentioned in subsection (2) is the name by which the AS/ACIF Standard, adopted by this Technical Standard under section 7, is usually cited. The AS/ACIF Standard was published in 2001.
Note 2 The AS/ACIF Standard, as adopted by this Standard, does not include any amendments that may subsequently be made by Standards Australia and the Australian Communications Industry Forum. If amendments are made, the terms of this Technical Standard will differ from those of the AS/ACIF Standard unless the AS/ACIF Standard amendments are adopted by the ACA.
[2] Section 5, definition of AS/ACIF Standard
substitute
AS/ACIF Standard means the Australian Communications Industry Forum/ Australian Standard: Analogue interworking and non‑interference requirements for Customer Equipment for connection to the Public Switched Telephone Network (AS/ACIF S002: 2001) as existing on 5 April 2001.
AS/ACIF S002-2001 (Amdt No. 1/2002) means amendment No. 1 of the Australian Communications Industry Forum/Australian Standard: Analogue interworking and non‑interference requirements for Customer Equipment for connection to the Public Switched Telephone Network — AS/ACIF S002: 2001 as published by the Australian Communications Industry Forum and Standards Australia International Limited in December 2001.
[3] Section 7
substitute
7 Standards with which customer equipment must comply
Customer equipment to which this Technical Standard applies must comply with the AS/ACIF Standard as amended by AS/ACIF S002-2001 (Amdt No. 1/2002).