Step 1

Identify the transfer amount in relation to the non‑member spouse.

Note   Subsection 22CD (2) of the Act requires the rate of associate immediate annuity to be calculated by reference to the transfer amount.

Step 2

Work out an annuity factor (F y+m) based on the non‑member spouse’s gender and age, using the formula:

where:

Fy is the valuation factor mentioned in Table 1 in Schedule 2 applicable, at the operative time, to the non‑member spouse’s gender and age in completed years (represented by y).

m is the number of completed months of the non‑member spouse’s age, at the operative time, that are not included in the non‑member spouse’s age in completed years.

Fy+1 is the valuation factor mentioned in Table 1 in Schedule 2 that would apply to the person if the person’s age in completed years was one year more than it is at the operative time.

Note   The associate immediate annuity does not include a reversionary component.

Step 3

Divide the transfer amount identified in step 1 by the annuity factor worked out in step 2.

The result is the annual rate of the associate immediate annuity.

Step 4

The annual rate is to be increased in the same way, and at the same time, as the rate of parliamentary allowance is increased.

Step 1

Identify the transfer amount at the operative time.

Step 2A

Increase the transfer amount for any period between the operative time and the time at which the associate deferred annuity first becomes payable, using the Treasury bond rate for the last working day of the financial year ending immediately before the period for which the increase is being calculated for bonds with a 10 year term.

Note   The period between the operative time and the time at which the associate deferred annuity first becomes payable may include a number of full financial years, or may occur entirely within a single financial year.

Treasury bond rate for bonds with a 10 year term

The Treasury bond rate for the last working day of a financial year for bonds with a 10 year term is:

(a) if any Treasury bonds with that term were issued on that day — the annual yield on those bonds; or

(b) in any other case — the annual yield on Treasury bonds with that term, as published by the Reserve Bank of Australia for that day.

Calculation of increase in transfer amount

The increase in the transfer amount is calculated:

(a) at the end of each financial year that occurs between the operative time and the time at which the associate deferred annuity first becomes payable; and

(b) immediately before the associate deferred annuity first becomes payable;

using the applicable Treasury bond rate for the relevant period worked out in steps 2B, 2C and 2D, and compounded period by period.

Step 2B

First period

Identify the shorter of:

(a) the period between the operative time and the end of the financial year in which the operative time occurs; and

(b) the period between the operative time and the time at which the associate deferred annuity first becomes payable.

This is the first period.

Multiply the number of days in the first period by the Treasury bond rate for bonds with a 10 year term that is applicable to the financial year in which the first period occurs, and divide the result by 365.

Round the result to 3 decimal places.

The result is the applicable Treasury bond rate for the first period.

Step 2C

Full financial years (if any)

Use this step if a full financial year occurs immediately after the end of the first period and before the associate deferred annuity first becomes payable. This is the second period.

Identify the Treasury bond rate for bonds with a 10 year term that is applicable to the financial year.

Round the result to 3 decimal places.

The result is the applicable Treasury bond rate for the second period.

Repeat this arrangement for each full financial year after the second period.

Step 2D

Final period (if any)

Use this step if:

(a) there is any period between the end of a financial year and the time at which the associate deferred annuity first becomes payable; and

(b) neither step 2B nor step 2C covers that period.

This is the final period.

Multiply the number of days in the final period by the Treasury bond rate for bonds with a 10 year term that is applicable to the financial year in which the final period occurs, and divide the result by 365.

Round the result to 3 decimal places.

The result is the applicable Treasury bond rate for the final period.

Step 3

Work out an annuity factor (F y+m) based on the non‑member spouse’s gender and age, using the formula:

where:

Fy is:

(a) if the associate deferred annuity is not payable on permanent incapacity — the valuation factor mentioned in Table 2A in Schedule 2, applicable, when the associate deferred annuity first becomes payable, to the non‑member spouse’s gender and age in completed years (represented by y); and

(b) if the associate deferred annuity is payable on permanent incapacity — the valuation factor mentioned in Table 2B in Schedule 2, applicable, when the associate deferred annuity first becomes payable, to the non‑member spouse’s gender and age in completed years (represented by y).

m is the number of completed months of the non‑member spouse’s age, when the associate deferred annuity first becomes payable, that are not included in the non‑member spouse’s age in completed years.

Fy+1 is:

(a) if the associate deferred annuity is not payable on permanent incapacity — the valuation factor mentioned in Table 2A in Schedule 2, applicable, when the associate deferred annuity first becomes payable, to the non‑member spouse’s gender and age in completed years if the person’s age in completed years was one year more than it was at that time; and

(b) if the associate deferred annuity is payable on permanent incapacity — the valuation factor mentioned in Table 2B in Schedule 2, applicable, when the associate deferred annuity first becomes payable, to the non‑member spouse’s gender and age in completed years if the person’s age in completed years was one year more than it was at the operative time.

Note   The associate deferred annuity does not include a reversionary component.

Step 4

Divide the transfer amount, as increased in step 2A, by the annuity factor worked out in step 3.

The result is the annual rate of associate deferred annuity.

Step 5

The annual rate is to be increased in the same way, and at the same time, as the rate of parliamentary allowance is increased.

Step 1

Identify the transfer amount at the operative time.

Step 2

Increase the transfer amount as if it were the lump sum amount calculated in step 2A in subsection 2.03 (1) when the associate deferred annuity becomes payable.

Note   A lump sum amount is increased under section 2.03 only if there is a period between the operative time and the time at which benefits first become payable. Therefore, in a particular case, it is possible that the transfer amount will not need to be increased in this step.

Step 3

Identify the lump sum value of the associate deferred annuity, as calculated under subsection 22CE (1) of the Act to the date of payment.

Note   The lump sum value of the associate deferred annuity represents the increased transfer amount worked out under section 2.03.

If the lump sum value of the associate deferred annuity has previously been reduced in accordance with these Orders, the reduction must be taken into account.

Step 4

Reduce the lump sum value of the associate deferred annuity as identified in step 3 by the increased transfer amount worked out in step 2.

Step 5

Substitute the reduced lump sum amount worked out in step 4 for the lump sum calculated in step 2A in subsection 2.03 (1), for payment under section 22CE.

Step 1

Identify the applicable basic percentage, and each applicable additional percentage, before the operative time.

Step 2

Multiply the applicable basic percentage identified in step 1 by the transfer factor.

Multiply each applicable additional percentage identified in step 1 by the transfer factor.

Step 3

Reduce the applicable basic percentage identified in step 1 by the percentage worked out in step 2.

Reduce each applicable additional percentage identified in step 1 by the applicable percentage worked out in step 2.

Step 4

Apply the reduced applicable basic percentage after the operative time to the rate of parliamentary allowance.

The result is the annual rate of retiring allowance (other than additional retiring allowance), or the annual rate of the annuity under section 19 of the Act based on the retiring allowance.

Step 5

Apply each reduced applicable additional percentage after the operative time to:

(a) the rate of the related salary payable in respect of a Minister of State; or

(b) the rate of the related allowance by way of salary payable in respect of an office holder.

The result is the annual rate of additional retiring allowance, or the annual rate of the annuity under section 19 of the Act based on the additional retiring allowance.

Step 1

Identify the annual rate of associate immediate annuity that was payable in relation to the member spouse immediately before the operative time.

Step 2

Work out an annuity factor (F y+m) based on the member spouse’s gender and age, using the formula:

where:

Fy is the valuation factor mentioned in Table 1 in Schedule 3, applicable, at the operative time, to the member spouse’s gender and age in completed years (represented by y).

m is the number of completed months of the member spouse’s age, when the associate deferred annuity first becomes payable, that are not included in the member spouse’s age in completed years.

Fy+1 is the valuation factor mentioned in Table 1 in Schedule 3, applicable, at the operative time, to the member spouse’s gender and age in completed years if the person’s age in completed years was one year more than it was at that time.

Step 3

Multiply the annual rate of associate immediate annuity by the annuity factor worked out in step 2.

Step 4

Subtract the transfer amount from the amount worked out in step 3.

Step 5

Divide the amount worked out in step 4 by the annuity factor worked out in step 2.

The result is the annual rate of associate immediate annuity payable after the operative time in respect of the original interest.

Step 6

The annual rate is to be increased in the same way, and at the same time, as the rate of parliamentary allowance is increased.

Step 1

Identify the annual rate of associate deferred annuity that would have been payable in relation to the member spouse immediately before the operative time.

Step 2

Work out an annuity factor (F y+m) based on the member spouse’s gender and age, using the formula:

where:

Fy is:

(a) if the associate deferred annuity is not payable on permanent incapacity — the valuation factor mentioned in Table 2A in Schedule 3, applicable, when the associate deferred annuity first becomes payable, to the member spouse’s gender and age in completed years (represented by y); and

(b) if the associate deferred annuity is payable on permanent incapacity — the valuation factor mentioned in Table 2B in Schedule 3, applicable, when the associate deferred annuity first becomes payable, to the member spouse’s gender and age in completed years (represented by y).

m is the number of completed months of the member spouse’s age, when the associate deferred annuity first becomes payable, that are not included in the member spouse’s age in completed years.

Fy+1 is:

(a) if the associate deferred annuity is not payable on permanent incapacity — the valuation factor mentioned in Table 2A in Schedule 3, applicable, when the associate deferred annuity first becomes payable, to the member spouse’s gender and age in completed years if the person’s age in completed years was one year more than it was at that time; and

(b) if the associate deferred annuity is payable on permanent incapacity — the valuation factor mentioned in Table 2B in Schedule 3, applicable, when the associate deferred annuity first becomes payable, to the member spouse’s gender and age in completed years if the person’s age in completed years was one year more than it was at the operative time.

Step 3

Multiply the annual rate of associate deferred annuity by the annuity factor worked out in step 2.

Step 4

Subtract the transfer amount from the amount worked out in step 3.

Step 5

Divide the amount worked out in step 4 by the annuity factor worked out in step 2.

The result is the annual rate of associate deferred annuity payable after the operative time in respect of the original interest.

Step 6

The annual rate is to be increased in the same way, and at the same time, as the rate of parliamentary allowance is increased.

1

An interest that a person who is a member of either House has in the Scheme.

(ABP × Parl. A + AARA – PC) × PFy+m,s + LS × LSFy+m,s

where:

ABP is the person’s accrued basic pension multiple at the operative time calculated, by reference to the person’s period of service:

 (a) by adding:

 (i) for service that occurred within the first 8 years — 0.0625 × each full year of service plus 0.0625/365 × the number of left‑over days in that period; and

 (ii) for service that occurred within the next 10 years — 0.025 × each full year of service plus 0.025/365 × the number of left‑over days in that period; and

 (b) if section 22CD of the Act applies to the interest — by subtracting from the amount calculated under paragraph (a) any interim factors for previous splits (calculated in accordance with subsection 22CH (6) of the Act) that would apply after a retiring allowance becomes payable.

Note   ABP will not exceed 0.75.

Parl. A is the parliamentary allowance of the person, expressed as an annual amount, at the operative time.

AARA is the person’s additional retiring allowance, if any, being the lesser of:

 (a) the sum of the additional retiring allowances accrued at the operative time by the person for each office the person held as a Minister of State or as an office holder during the person’s period of service, calculated, for each office, as the product of:

 (i) the person’s accrued additional retiring allowance multiple — being 0.0625 × the number of years, and any fraction of a year, the person served as a Minister of State or an office holder, as the case may be, during that period, and if section 22CD of the Act applies to the interest, that multiple less the sum of any interim factors for previous splits (calculated in accordance with subsection 22CH (7) of the Act) that would apply after a retiring allowance becomes payable; and

 (ii) the annual salary payable to a Minister of State, or the annual allowance by way of salary payable to an office holder in respect of that office, as the case may be, at the operative time; and

 (b) whichever of the following applies:

 (i) if the person has accrued additional retiring allowance for 1 office only and section 22CD of the Act does not apply to the interest — 75% of the annual salary payable to a Minister of State, or the annual allowance by way of salary payable to an office holder in respect of that office, as the case may be, at the operative time;

 (ii) if the person has accrued additional retiring allowance for 1 office only and section 22CD of the Act applies to the interest — 75% of the annual salary payable to a Minister of State, or the annual allowance by way of salary payable to an office holder in respect of that office, as the case may be, at the operative time less the product of the sum of any interim factors for previous splits (calculated in accordance with subsection 22CH (7) of the Act) that would apply after a retiring allowance becomes payable, and that annual salary or annual allowance, as the case may be, at the operative time;

 (iii) if the person has accrued additional retiring allowance for 2 or more offices and section 22CD of the Act does not apply to the interest — 75% of the highest annual salary or annual allowance by way of salary payable in respect of those offices at the operative time;

 (iv) if the person has accrued additional retiring allowance for 2 or more offices and section 22CD of the Act applies to the interest — 75% of the highest annual salary payable to a Minister of State, or the annual allowance by way of salary payable to an office holder in respect of those offices, as the case may be, at the operative time less the product of the sum of any interim factors for previous splits (calculated in accordance with subsection 22CH (7) of the Act) that would apply after a retiring allowance becomes payable, and that annual salary or annual allowance, as the case may be, at the operative time.

PC is the annual amount, if any, by which the person’s retiring allowance is reduced under subsection 20 (3A) of the Act.

PFy+m,s is the pension valuation factor calculated in accordance with the following formula:

where:

PFy,s is the pension valuation factor mentioned, for:

 (a) the person’s age in completed years (y) at the operative time; and

 (b) the person’s period of service in completed years (s) as at the date of the last House of Representatives election before the operative time;

in whichever of Tables 1 to 36 is applicable, according to Table A, given the following:

 (c) the person’s gender;

 (d) whether he or she is a member of the House of Representatives or the Senate or was such a member at the operative time;

 (e) whether or not, if he or she became entitled to a retiring allowance within the meaning of the Act, he or she would be a deferring member;

 (f) the number of completed years, at the operative time, since the last election of the House of Representatives;

 (g) in the case of a member of the Senate, whether he or she last became a member of the Senate (whether by election or otherwise) before the last House of Representatives election.

m is the number of complete months of the person’s age at the operative time that are not included in the person’s completed years of age.

PFy+1,s is the pension valuation factor mentioned in whichever of Tables 1 to 36 is applicable that would apply if the person’s age in completed years at the operative time were 1 year more than it is.

LS is the sum of the person’s member contributions paid to the operative time, plus:

 (a) for a person whose period of service is at least 8 years — 2⅓ times the person’s member contributions paid in the period of service of 8 years immediately before the operative time; or

 (b) for a person whose period of service is less than 8 years — 2⅓ times the person’s member contributions paid in the period of service immediately before the operative time.

LSFy+m,s is the factor calculated in accordance with the following formula:

where:

LSFy,s is the lump sum valuation factor mentioned for:

 (a) the person’s age in completed years (y) at the operative time; and

 (b) the person’s period of service in completed years (s) as at the date of the last House of Representatives election before the operative time;

in whichever of Tables 37 to 54 is applicable, according to Table B, given the following:

 (c) the person’s gender;

 (d) whether he or she is a member of the House of Representatives or the Senate;

 (e) the number of completed years, at the operative time, since the last election of the House of Representatives;

 (f) in the case of a member of the Senate, whether he or she last became a member of the Senate (whether by election or otherwise) before the last House of Representatives election.

m has the meaning given above.

LSFy+1,s is the lump sum valuation factor mentioned in whichever of Tables 37 to 54 is applicable that would apply if the person’s age in completed years at the operative time were 1 year more than it is.

2

An interest that a person who has ceased to be a member of either House has in the Scheme as a deferring member under Part VA of the Act, before the day on which the person attains the age of 55 years.

(ABP × Parl. A + AARA – PC) × DPFy+m

where:

ABP is the person’s accrued basic pension multiple at the operative time calculated, by reference to the person’s period of service:

 (a) by adding:

 (i) for service that occurred within the first 8 years — 0.0625 × each full year of service plus 0.0625/365 × the number of left‑over days in that period; and

 (ii) for service that occurred within the next 10 years — 0.025 × each full year of service plus 0.025/365 × the number of left‑over days in that period; and

 (b) if section 22CD of the Act applies to the interest — by subtracting from the amount calculated under paragraph (a) any interim factors for previous splits (calculated in accordance with subsection 22CH (6) of the Act) that would apply after a retiring allowance becomes payable.

Note   ABP will not exceed 0.75.

Parl. A is the parliamentary allowance, expressed as an annual amount, payable to a member of either House of the Parliament at the operative time.

AARA is the person’s additional retiring allowance, if any, being the lesser of:

 (a) the sum of the additional retiring allowances accrued at the operative time by the person for each office the person held as a Minister of State or as an office holder during the person’s period of service, calculated, for each office, as the product of:

 (i) the person’s accrued additional retiring allowance multiple — being 0.0625 × the number of years, and any fraction of a year, the person served as a Minister of State or an office holder, as the case may be, during that period, and if section 22CD of the Act applies to the interest, that multiple less the sum of any interim factors for previous splits (calculated in accordance with subsection 22CH (7) of the Act) that would apply after a retiring allowance becomes payable; and

 (ii) the annual salary payable to a Minister of State, or the annual allowance by way of salary payable to an office holder in respect of that office, as the case may be, at the operative time; and

 (b) whichever of the following applies:

 (i) if the person has accrued additional retiring allowance for 1 office only and section 22CD of the Act does not apply to the interest — 75% of the annual salary payable to a Minister of State, or the annual allowance by way of salary payable to an office holder in respect of that office, as the case may be, at the operative time;

 (ii) if the person has accrued additional retiring allowance for 1 office only and section 22CD of the Act applies to the interest — 75% of the annual salary payable to a Minister of State, or the annual allowance by way of salary payable to an office holder in respect of that office, as the case may be, at the operative time less the product of the sum of any interim factors for previous splits (calculated in accordance with subsection 22CH (7) of the Act) that would apply after a retiring allowance becomes payable, and that annual salary or annual allowance, as the case may be, at the operative time;

 (iii) if the person has accrued additional retiring allowance for 2 or more offices and section 22CD of the Act does not apply to the interest — 75% of the highest annual salary or annual allowance by way of salary payable in respect of those offices at the operative time;

 (iv) if the person has accrued additional retiring allowance for 2 or more offices and section 22CD of the Act applies to the interest — 75% of the highest annual salary payable to a Minister of State, or the annual allowance by way of salary payable to an office holder in respect of those offices, as the case may be, at the operative time less the product of the sum of any interim factors for previous splits (calculated in accordance with subsection 22CH (7) of the Act) that would apply after a retiring allowance becomes payable, and that annual salary or annual allowance, as the case may be, at the operative time.

PC is the annual amount, if any, by which the person’s retiring allowance is reduced under subsection 20 (3A) of the Act.

DPFy+m is the deferred pension valuation factor calculated in accordance with the following formula:

where:

DPFy is the deferred pension valuation factor mentioned in Table 55 that applies at the person’s age in completed years (y) at the operative time for the person’s gender.

m is the number of complete months of the person’s age at the operative time that are not included in the person’s completed years of age.

DPFy+1 is the deferred pension valuation factor mentioned in Table 55 that would apply if the person’s age in completed years at the operative time were 1 year more than it is.

3

An interest that a person has in the Scheme if the person is entitled to an associate deferred annuity under subsection 22CD (3) of the Act.

where UTA is:

 (a) the lump sum value of the transfer amount, as increased in accordance with the method set out below; or

 (b) if section 22CD of the Act applies to the interest — the amount calculated under paragraph (a) less the sum of any reductions that apply under section 22CI of the Act, as if the annuity had become payable at the operative time.

Method for increasing transfer amount

Step 1

Increase the transfer amount for any period between the operative time (being the operative time in relation to the splitting agreement or splitting order as a result of which the person has the entitlement under subsection 22CD (3) of the Act) and the operative time, using the Treasury bond rate for the last working day of the financial year ending immediately before the period for which the increase is being calculated for bonds with a 10 year term.

Note   The period between the operative time and the operative time may include a number of full financial years, or may occur entirely within a single financial year.

Treasury bond rate for bonds with a 10 year term

The Treasury bond rate for the last working day of a financial year for bonds with a 10 year term is:

 (a) if any Treasury bonds with that term were issued on that day — the annual yield on those bonds; or

 (b) in any other case — the annual yield on Treasury bonds with that term, as published by the Reserve Bank of Australia for that day.

Calculation of increase in transfer amount

The increase in the transfer amount is calculated:

 (a) at the end of each financial year that occurs between the operative time and the operative time; and

 (b) immediately before the operative time;

using the applicable Treasury bond rate for the relevant period worked out in accordance with steps 2, 3 and 4, and compounded period by period.

Step 2

First period

Identify the shorter of:

 (a) the period between the operative time and the end of the financial year in which the operative time occurs; and

 (b) the period between the operative time and the operative time.

This is the first period.

Multiply the number of days in the first period by the Treasury bond rate for bonds with a 10 year term that is applicable to the financial year in which the first period occurs, and divide the result by 365.

Round the result to 3 decimal places.

The result is the applicable Treasury bond rate for the first period.

Step 3

Full financial years (if any)

Use this step if a full financial year occurs immediately after the end of the first period and before the operative time. This is the second period.

Identify the Treasury bond rate for bonds with a 10 year term that is applicable to the financial year.

Round the result to 3 decimal places.

The result is the applicable Treasury bond rate for the second period.

Repeat this arrangement for each full financial year after the second period.

Step 4

Final period (if any)

Use this step if:

 (a) there is any period between the end of a financial year and the operative time; and

 (b) neither step 2 nor step 3 covers that period.

This is the final period.

Multiply the number of days in the final period by the Treasury bond rate for bonds with a 10 year term that is applicable to the financial year in which the final period occurs, and divide the result by 365.

Round the result to 3 decimal places.

The result is the applicable Treasury bond rate for the final period.

1

An interest that a person has in the Scheme under section 18 or 19 of the Act.

A × Fy+m

where:

A is the annual retiring allowance (including additional retiring allowance) to which the person is entitled under section 18 of the Act, or the annuity to which the person is entitled under section 19 of the Act, as the case may be (without applying any reduction under section 21 or 21B of the Act).

Fy+m is the factor calculated in accordance with the following formula:

where:

Fy is the valuation factor mentioned in Table 56 that applies at the person’s age in completed years (y) at the operative time for the person’s gender and type of pension.

m is the number of complete months of the person’s age at the operative time that are not included in the person’s completed years of age.

Fy+1 is the valuation factor mentioned in Table 56 that would apply if the person’s age in completed years at the operative time were 1 year more than it is.

2

An interest that a person has in the Scheme if the person is entitled to an associate immediate annuity under subsection 22CD (2) of the Act.

where:

AIA is the associate immediate annuity to which the person is entitled under subsection 22CD (2) of the Act.

Fy+m is the factor calculated in accordance with the following formula:

where:

Fy is the valuation factor mentioned in Table 57 that applies at the person’s age in completed years (y) at the operative time for the person’s gender.

m is the number of complete months of the person’s age at the operative time that are not included in the person’s completed years of age.

Fy+1 is the valuation factor mentioned in Table 57 that would apply if the person’s age in completed years at the operative time were 1 year more than it is.

3

An interest that a person has in the Scheme if the person is entitled to an associate deferred annuity under subsection 22CD (3) of the Act.

where:

ADA is the associate deferred annuity that is payable to the person under section 22CE of the Act.

Fy+m is the factor calculated in accordance with the following formula:

where:

Fy is the valuation factor mentioned in Table 58 that applies at the person’s age in completed years (y) at the operative time for the person’s gender and type of annuity.

m is the number of complete months of the person’s age at the operative time that are not included in the person’s completed years of age.

Fy+1 is the valuation factor mentioned in Table 58 that would apply if the person’s age in completed years at the operative time were 1 year more than it is.

1

Male

HoR

No

0

n/a

1

2

Male

HoR

No

1

n/a

2

3

Male

HoR

No

2 or more

n/a

3

4

Male

HoR

Yes

0

n/a

4

5

Male

HoR

Yes

1

n/a

5

6

Male

HoR

Yes

2 or more

n/a

6

7

Male

Senate

No

0

No

7

8

Male

Senate

No

1

No

8

9

Male

Senate

No

2 or more

No

9

10

Male

Senate

No

0

Yes

10

11

Male

Senate

No

1

Yes

11

12

Male

Senate

No

2 or more

Yes

12

13

Male

Senate

Yes

0

No

13

14

Male

Senate

Yes

1

No

14

15

Male

Senate

Yes

2 or more

No

15

16

Male

Senate

Yes

0

Yes

16

17

Male

Senate

Yes

1

Yes

17

18

Male

Senate

Yes

2 or more

Yes

18

19

Female

HoR

No

0

n/a

19

20

Female

HoR

No

1

n/a

20

21

Female

HoR

No

2 or more

n/a

21

22

Female

HoR

Yes

0

n/a

22

23

Female

HoR

Yes

1

n/a

23

24

Female

HoR

Yes

2 or more

n/a

24

25

Female

Senate

No

0

No

25

26

Female

Senate

No

1

No

26

27

Female

Senate

No

2 or more

No

27

28

Female

Senate

No

0

Yes

28

29

Female

Senate

No

1

Yes

29

30

Female

Senate

No

2 or more

Yes

30

31

Female

Senate

Yes

0

No

31

32

Female

Senate

Yes

1

No

32

33

Female

Senate

Yes

2 or more

No

33

34

Female

Senate

Yes

0

Yes

34

35

Female

Senate

Yes

1

Yes

35

36

Female

Senate

Yes

2 or more

Yes

36

Item

Gender

House

Interest subject to deferral

Completed years since last election for the House of Representatives

Last became member of Senate before last election for the House of Representatives

Relevant table

1

Male

HoR

No

0

n/a

37

2

Male

HoR

No

1

n/a

38

3

Male

HoR

No

2 or more

n/a

39

4

Male

Senate

No

0

No

40

5

Male

Senate

No

1

No

41

6

Male

Senate

No

2 or more

No

42

7

Male

Senate

No

0

Yes

43

8

Male

Senate

No

1

Yes

44

9

Male

Senate

No

2 or more

Yes

45

10

Female

HoR

No

0

n/a

46

11

Female

HoR

No

1

n/a

47

12

Female

HoR

No

2 or more

n/a

48

13

Female

Senate

No

0

No

49

14

Female

Senate

No

1

No

50

15

Female

Senate

No

2 or more

No

51

16

Female

Senate

No

0

Yes

52

17

Female

Senate

No

1

Yes

53

18

Female

Senate

No

2 or more

Yes

54

up to 30

15.5893

15.5868

19.5462

20.0720

20.0691

31

15.3930

15.3905

19.3122

19.8369

19.8339

24.8576

32

15.1912

15.1885

19.0720

19.5961

19.5931

24.5727

25.2293

33

14.9860

14.9830

18.8272

19.3507

19.3476

24.2821

24.9382

24.9346

34

14.7809

14.7775

18.5812

19.1028

19.0996

23.9878

24.6426

24.6389

24.6348

35

14.5678

14.5640

18.3268

18.8475

18.8441

23.6853

24.3395

24.3357

24.3315

25.2605

36

14.3505

14.3461

18.0675

18.5871

18.5833

23.3764

24.0300

24.0261

24.0218

24.9502

24.9451

37

14.1379

14.1329

17.8110

18.3266

18.3224

23.0659

23.7172

23.7132

23.7088

24.6356

24.6304

24.6246

38

13.9121

13.9066

17.5414

18.0555

18.0508

22.7446

23.3948

23.3906

23.3860

24.3123

24.3070

24.3010

24.5598

39

13.6838

13.6777

17.2681

17.7803

17.7749

22.4178

23.0667

23.0621

23.0572

23.9827

23.9773

23.9712

24.2299

24.2299

40

13.4713

13.4647

17.0073

17.5121

17.5059

22.0953

22.7394

22.7342

22.7289

23.6513

23.6457

23.6395

23.8973

23.8973

23.8973

41

13.1865

13.1793

16.6661

17.1689

17.1621

21.6873

22.3296

22.3238

22.3178

23.2388

23.2329

23.2264

23.4841

23.4841

23.4841

23.9410

42

12.8980

12.8902

16.3193

16.8201

16.8126

21.2720

21.9121

21.9054

21.8987

22.8180

22.8115

22.8048

23.0622

23.0622

23.0622

23.5189

43

12.6443

12.6362

16.0013

16.4883

16.4803

20.8695

21.5005

21.4930

21.4854

22.3981

22.3908

22.3834

22.6391

22.6391

22.6391

23.0942

44

12.3458

12.3373

15.6417

16.1265

16.1177

20.4379

21.0667

21.0584

21.0497

21.9601

21.9520

21.9437

22.1992

22.1992

22.1992

22.6540

45

12.0427

12.0336

15.2757

15.7583

15.7488

19.9981

20.6246

20.6155

20.6058

21.5134

21.5043

21.4949

21.7502

21.7502

21.7502

22.2047

46

11.8157

11.8063

14.9753

15.4316

15.4218

19.5927

20.2023

20.1925

20.1820

21.0773

21.0669

21.0563

21.3082

21.3082

21.3082

21.7596

47

11.4991

11.4891

14.5932

15.0474

15.0371

19.1343

19.7416

19.7309

19.7195

20.6124

20.6008

20.5888

20.8405

20.8405

20.8405

21.2916

48

11.1774

11.1660

14.2040

14.6558

14.6446

18.6667

19.2719

19.2603

19.2478

20.1382

20.1256

20.1122

20.3637

20.3637

20.3637

20.8146

49

11.0207

11.0093

13.9596

14.3586

14.3472

18.2809

18.8536

18.8417

18.8284

19.6956

19.6821

19.6675

19.9119

19.9119

19.9119

20.3567

50

10.6829

10.6706

13.5523

13.9491

13.9369

17.7926

18.3633

18.3507

18.3366

19.2016

19.1868

19.1709

19.4154

19.4154

19.4154

19.8600

51

10.2167

10.2042

12.9962

13.3905

13.3769

17.1286

17.6972

17.6838

17.6691

18.5321

18.5164

18.4992

18.7436

18.7436

18.7436

19.1879

52

10.0955

10.0862

12.7472

13.0347

13.0214

16.6422

17.1452

17.1318

17.1167

17.9347

17.9188

17.9008

18.1304

18.1304

18.1304

18.5623

53

9.5987

9.5898

12.1593

12.4459

12.4320

15.9452

16.4466

16.4325

16.4165

17.2332

17.2167

17.1980

17.4279

17.4279

17.4279

17.8599

54

9.0955

9.0870

11.5623

11.8477

11.8335

15.2368

15.7358

15.7202

15.7034

16.5182

16.5008

16.4812

16.7112

16.7112

16.7112

17.1432

55

9.1985

9.1985

11.5082

11.6871

11.6771

14.9181

15.2830

15.2681

15.2511

15.9731

15.9557

15.9358

16.1346

16.1346

16.1346

16.5407

56

8.8571

8.8571

11.1058

11.2870

11.2771

14.4437

14.8075

14.7913

14.7721

15.4924

15.4737

15.4521

15.6515

15.6515

15.6515

16.0581

57

8.5098

8.5098

10.6924

10.8866

10.8766

13.9669

14.3290

14.3119

14.2909

15.0085

14.9872

14.9639

15.1635

15.1635

15.1635

15.5703

58

9.2810

9.2810

11.2629

11.2629

11.2629

14.1875

14.4146

14.4023

14.3851

14.9105

14.8894

14.8652

14.9988

14.9988

14.9988

15.3505

59

8.9057

8.9057

10.8252

10.8252

10.8252

13.6803

13.9110

13.8985

13.8806

14.4058

14.3828

14.3554

14.4916

14.4916

14.4916

14.8447

60

8.5182

8.5182

10.3759

10.3759

10.3759

13.1563

13.4041

13.3915

13.3735

13.8981

13.8737

13.8438

13.9824

13.9824

13.9824

14.3363

61

11.3562

11.3562

11.3562

13.8905

13.8905

13.8905

13.8823

14.2128

14.1952

14.1707

14.1707

14.1707

14.1707

14.4079

62

10.8783

10.8783

10.8783

13.3422

13.3422

13.3422

13.3422

13.6793

13.6615

13.6358

13.6358

13.6358

13.6358

13.8778

63

10.3906

10.3906

10.3906

12.7843

12.7843

12.7843

12.7843

13.1473

13.1294

13.1034

13.1034

13.1034

13.1034

13.3502

64

14.0792

14.0792

14.0792

14.0792

14.0792

14.0792

14.0676

14.0676

14.0676

14.0676

14.0676

65

13.4921

13.4921

13.4921

13.4921

13.4921

13.4921

13.4921

13.4921

13.4921

13.4921

13.4921

66

12.9175

12.9175

12.9175

12.9175

12.9175

12.9175

12.9175

12.9175

12.9175

12.9175

12.9175

67

12.3450

12.3450

12.3450

12.3450

12.3450

12.3450

12.3450

12.3450

12.3450

12.3450

12.3450

68

11.7753

11.7753

11.7753

11.7753

11.7753

11.7753

11.7753

11.7753

11.7753

11.7753

11.7753

69

11.2087

11.2087

11.2087

11.2087

11.2087

11.2087

11.2087

11.2087

11.2087

11.2087

11.2087

70 and over

10.6455

10.6455

10.6455

10.6455

10.6455

10.6455

10.6455

10.6455

10.6455

10.6455

10.6455

up to 30

16.0693

16.0668

20.1398

20.6765

31

15.8700

15.8675

19.9034

20.4395

20.4366

32

15.6691

15.6665

19.6641

20.1992

20.1962

25.3171

33

15.4626

15.4598

19.4185

19.9531

19.9500

25.0261

25.6957

34

15.2520

15.2490

19.1678

19.7018

19.6986

24.7291

25.3982

25.3945

35

15.0417

15.0383

18.9160

19.4480

19.4447

24.4283

25.0961

25.0923

25.0881

36

14.8228

14.8189

18.6554

19.1864

19.1830

24.1189

24.7862

24.7824

24.7781

25.7256

37

14.5998

14.5954

18.3898

18.9197

18.9159

23.8032

24.4698

24.4659

24.4615

25.4086

25.4034

38

14.3813

14.3763

18.1268

18.6528

18.6485

23.4857

24.1501

24.1460

24.1415

25.0870

25.0817

25.0817

39

14.1507

14.1451

17.8516

18.3760

18.3712

23.1577

23.8211

23.8168

23.8121

24.7571

24.7516

24.7516

25.0155

40

13.9174

13.9111

17.5724

18.0950

18.0895

22.8241

23.4862

23.4815

23.4766

24.4207

24.4152

24.4152

24.6789

24.6789

41

13.6490

13.6423

17.2461

17.7612

17.7549

22.4245

23.0817

23.0764

23.0710

24.0120

24.0063

24.0063

24.2691

24.2691

24.2691

42

13.3571

13.3497

16.8966

17.4098

17.4028

22.0071

22.6624

22.6565

22.6505

23.5901

23.5841

23.5841

23.8467

23.8467

23.8467

24.3124

43

13.0611

13.0532

16.5414

17.0524

17.0448

21.5821

22.2352

22.2285

22.2217

23.1596

23.1531

23.1531

23.4155

23.4155

23.4155

23.8809

44

12.7997

12.7915

16.2147

16.7118

16.7036

21.1697

21.8137

21.8061

21.7984

22.7297

22.7224

22.7224

22.9830

22.9830

22.9830

23.4469

45

12.4923

12.4837

15.8453

16.3402

16.3313

20.7274

21.3693

21.3609

21.3521

22.2812

22.2730

22.2730

22.5334

22.5334

22.5334

22.9970

46

12.1796

12.1703

15.4689

15.9617

15.9521

20.2765

20.9161

20.9069

20.8971

21.8236

21.8143

21.8143

22.0746

22.0746

22.0746

22.5378

47

11.9441

11.9346

15.1593

15.6253

15.6154

19.8608

20.4833

20.4734

20.4627

21.3769

21.3664

21.3664

21.6231

21.6231

21.6231

22.0832

48

11.6166

11.6065

14.7658

15.2299

15.2194

19.3906

20.0110

20.0002

19.9886

20.9006

20.8889

20.8889

21.1455

21.1455

21.1455

21.6054

49

11.2843

11.2728

14.3653

14.8271

14.8158

18.9113

19.5297

19.5180

19.5053

20.4151

20.4023

20.4023

20.6587

20.6587

20.6587

21.1182

50

11.1206

11.1091

14.1130

14.5209

14.5094

18.5156

19.1010

19.0890

19.0755

19.9618

19.9481

19.9481

20.1973

20.1973

20.1973

20.6507

51

10.6488

10.6366

13.5512

13.9574

13.9452

17.8483

18.4322

18.4196

18.4056

19.2900

19.2753

19.2753

19.5245

19.5245

19.5245

19.9776

52

10.1677

10.1553

12.9791

13.3828

13.3694

17.1672

17.7491

17.7359

17.7212

18.6040

18.5884

18.5884

18.8375

18.8375

18.8375

19.2904

53

10.0401

10.0311

12.7217

13.0164

13.0033

16.6681

17.1833

17.1700

17.1549

17.9920

17.9762

17.9762

18.2104

18.2104

18.2104

18.6506

54

9.5296

9.5210

12.1186

12.4125

12.3988

15.9544

16.4681

16.4542

16.4382

17.2744

17.2580

17.2580

17.4924

17.4924

17.4924

17.9327

55

9.0123

9.0042

11.5061

11.7988

11.7848

15.2288

15.7403

15.7250

15.7082

16.5427

16.5255

16.5255

16.7600

16.7600

16.7600

17.2003

56

9.3174

9.3174

11.6819

11.8652

11.8551

15.1728

15.5467

15.5315

15.5141

16.2535

16.2358

16.2358

16.4385

16.4385

16.4385

16.8524

57

8.9663

8.9663

11.2698

11.4556

11.4455

14.6891

15.0620

15.0455

15.0259

15.7640

15.7449

15.7449

15.9483

15.9483

15.9483

16.3628

58

8.6091

8.6091

10.8463

11.0454

11.0353

14.2028

14.5742

14.5567

14.5353

15.2711

15.2493

15.2493

15.4530

15.4530

15.4530

15.8677

59

9.3967

9.3967

11.4307

11.4307

11.4307

14.4319

14.6652

14.6526

14.6351

15.1744

15.1528

15.1528

15.2892

15.2892

15.2892

15.6479

60

9.0085

9.0085

10.9809

10.9809

10.9809

13.9144

14.1517

14.1390

14.1206

14.6604

14.6370

14.6370

14.7760

14.7760

14.7760

15.1362

61

8.6092

8.6092

10.5204

10.5204

10.5204

13.3806

13.6356

13.6228

13.6043

14.1442

14.1193

14.1193

14.2608

14.2608

14.2608

14.6219

62

11.5360

11.5360

11.5360

14.1460

14.1460

14.1460

14.1376

14.4781

14.4601

14.4601

14.4601

14.4601

14.4601

14.7021

63

11.0511

11.0511

11.0511

13.5915

13.5915

13.5915

13.5915

13.9391

13.9209

13.9209

13.9209

13.9209

13.9209

14.1681

64

10.5560

10.5560

10.5560

13.0254

13.0254

13.0254

13.0254

13.3999

13.3816

13.3816

13.3816

13.3816

13.3816

13.6337

65

14.3712

14.3712

14.3712

14.3712

14.3712

14.3712

14.3712

14.3712

14.3712

14.3712

14.3712

66

13.7886

13.7886

13.7886

13.7886

13.7886

13.7886

13.7886

13.7886

13.7886

13.7886

13.7886

67

13.2069