Federal Register of Legislation - Australian Government

Primary content

Standards/Australian Design Rules for Vehicles as made
This instrument amends the Vehicle Standard (Australian Design Rule 35/06 – Commercial Vehicle Brake Systems) 2018 to provide for a transition between ADR 35/06 and the later version ADR 35/07.
Administered by: Infrastructure, Transport, Regional Development, Communications and the Arts
Exempt from sunsetting by the Legislation (Exemptions and Other Matters) Regulation 2015 s12 item 56C
Registered 01 Mar 2022
Tabling HistoryDate
Tabled Senate28-Mar-2022
Tabled HR29-Mar-2022
Date of repeal 27 Sep 2022
Repealed by Division 1 of Part 3 of Chapter 3 of the Legislation Act 2003

Title: Australian Coat of Arms - Description: Australian Coat of Arms

 

 

 

Vehicle Standard (Australian Design Rule 35/06 – Commercial Vehicle Brake Systems) 2018 Amendment 1

I, KEVIN HOGAN, Assistant Minister to the Deputy Prime Minister, determine this national road vehicle standard under section 12 of the Road Vehicle Standards Act 2018.

 

 

 

 

Dated              24 February 2022

 

 

 

 

 

 

 

 

 

 

 

 

[SIGNED]

Kevin Hogan

Assistant Minister to the Deputy Prime Minister

 


 

CONTENTS

 

1.               legislative provisions. 3

2.               amendment of vehicle standard.. 3

Schedule 1. 4

 


1.                                          legislative provisions

1.1.                                    Name of Legislative Instrument

1.1.1.                              This instrument is the Vehicle Standard (Australian Design Rule 35/06 – Commercial Vehicle Brake Systems) 2018 Amendment 1.

1.2.                                    Commencement

1.2.1.                              This instrument commences on the day after it is registered.

2.                                          amendment of vehicle standard

2.1.                                    The changes specified in Schedule 1 amend the Vehicle Standard (Australian Design Rule 35/06 – Commercial Vehicle Brake Systems) 2018.


2.2.                                     

Schedule 1

[1]               Clause 3.1, omit “3.10”, substitute “3.11”.

[2]               Clause 3.10, renumber as clause 3.11.

[3]               Insert a new clause 3.10 to read:

“3.10.              Vehicles certified to comply with the Australian Design Rule 35/07 – Commercial Vehicle Brake Systems, or a later version, are not required to comply with this rule.”