Federal Register of Legislation - Australian Government

Primary content

Standards/Australian Design Rules for Vehicles as made
This instrument amends the Vehicle Standard (Australian Design Rule 33/00 – Brake Systems for Motorcycles and Mopeds) 2007 to implement transition arrangements from this vehicle standard to a later vehicle standard. Under these arrangements, compliance to the new standard ADR 33/01 exempts a manufacturer from having to comply with ADR 33/00. This change does not affect the original intent of the standard but is essential to allow its correct operation in conjunction with ADR 33/01.
Administered by: Infrastructure and Regional Development
Exempt from sunsetting by the Legislation (Exemptions and Other Matters) Regulation 2015 s12 item 40
Registered 30 Nov 2017
Tabling HistoryDate
Tabled HR04-Dec-2017
Tabled Senate04-Dec-2017
Date of repeal 02 Dec 2017
Repealed by Division 1 of Part 3 of Chapter 3 of the Legislation Act 2003
Table of contents.

Aus Gov Logo

 

 

 

Vehicle Standard (Australian Design Rule 33/00 – Brake Systems for Motorcycles and Mopeds) 2007 Amendment 1

I, PAUL FLETCHER, Minister for Urban Infrastructure, determine this vehicle standard under section 7 of the Motor Vehicle Standards Act 1989.

 

 

 

 

Dated  21 November 2017

 

 

 

 

 

 

 

 

 

 

 

 

[SIGNED]

Paul Fletcher

 

Minister for Urban Infrastructure


 

CONTENTS

 

1.           legislative provisions. 3

2.           amendment of vehicle standard.. 3

Schedule 1. 4

 


1.                                          legislative provisions

1.1.                                    Name of Legislative Instrument

1.1.1.                              This instrument is the Vehicle Standard (Australian Design Rule 33/00 – Brake Systems for Motorcycles and Mopeds) 2007 Amendment 1.

1.2.                                    Commencement

1.2.1.                              This instrument commences on the day after it is registered.

2.                                          amendment of vehicle standard

2.1.                                    The changes specified in Schedule 1 amend Vehicle Standard (Australian Design Rule 33/00 – Brake Systems for Motorcycles and Mopeds) 2007.


2.2.                                     

Schedule 1

[1]               Clause 3 omit “clause 3.2”, substitute “clause 3.3”.

[2]               Clause 3.2 renumber as 3.3.

[3]               Insert a new clause 3.2 to read

“Vehicles certified to ADR 33/01 or a later version need not comply with this rule.”

[4]               Clause 5.1 omit “clause 3.2”, substitute “clause 3.3”.