Federal Register of Legislation - Australian Government

Skip to primary navigation Skip to primary content
Federal Register of Legislation Skip to Content
SearchOpen search

Primary content

Bookmark

this version | go to latest

Vehicle Standard (Australian Design Rule 3/04 – Seats and Seat Anchorages) 2017

Authoritative Version
Standards/Australian Design Rules for Vehicles as made
This instrument specifies requirements for seats, their attachment assemblies, their installation and any head restraint fitted, to minimise the possibility of occupant injury due to forces acting on the seat as a result of vehicle impact.
Administered by: Infrastructure, Transport, Regional Development, Communications and the Arts
General Comments: This standard was originally made under section 7 of the Motor Vehicle Standards Act 1989 and from 1 July 2021 continues in force as if it were a national road vehicle standard determined under section 12 of the Road Vehicle Standards Act 2018 (see Schedule 3, Part 2, item 2 of the Road Vehicle Standards (Consequential and Transitional Provisions) Act 2018).
Exempt from sunsetting by the Legislation (Exemptions and Other Matters) Regulation 2015 s12 item 56C
Registered 12 Oct 2017
Tabling HistoryDate
Tabled HR16-Oct-2017
Tabled Senate16-Oct-2017
This Legislative Instrument has been subject to a Motion to Disallow:
Motion Date:
07-Dec-2017
Expiry Date:
28-Mar-2018
House:
Senate
Details:
Full
Resolution:
Withdrawn
Resolution Date:
08-Feb-2018
Resolution Time:
Provisions:
Enabled by
TitleRegisterIdNumber
Authoritative version Road Vehicle Standards Act 2018
C2018A00163No. 163, 2018