Federal Register of Legislation - Australian Government

Primary content

Standards/Australian Design Rules for Vehicles as made
This instrument specifies requirements for seats, their attachment assemblies, their installation and any head restraint fitted, to minimise the possibility of occupant injury due to forces acting on the seat as a result of vehicle impact.
Administered by: Infrastructure, Transport, Regional Development, Communications and the Arts
General Comments: This standard was originally made under section 7 of the Motor Vehicle Standards Act 1989 and from 1 July 2021 continues in force as if it were a national road vehicle standard determined under section 12 of the Road Vehicle Standards Act 2018 (see Schedule 3, Part 2, item 2 of the Road Vehicle Standards (Consequential and Transitional Provisions) Act 2018).
Exempt from sunsetting by the Legislation (Exemptions and Other Matters) Regulation 2015 s12 item 56C
Registered 12 Oct 2017
Tabling HistoryDate
Tabled HR16-Oct-2017
Tabled Senate16-Oct-2017
This Legislative Instrument has been subject to a Motion to Disallow:
Motion Date:
Expiry Date:
Resolution Date:
Resolution Time:
Help with file formats Help with file formats
Legislative Instrument
F2017L01344 : Authoritative PDF Document : 1.4MB Primary Document Icon F2017L01344 : ZIP Document : 0.7MB
44 pages

Explanatory Statement
F2017L01344ES : PDF Document : 0.6MB Primary Document Icon F2017L01344ES : ZIP Document : 31KB
5 pages

Replacement Explanatory Statement
F2017L01344RES01 : PDF Document : 0.6MB Primary Document Icon F2017L01344RES01 : ZIP Document : 33KB
6 pages
Registration Date:
HR Tabled Date:
Tabled Senate Date: