Federal Register of Legislation - Australian Government

Primary content

Standards/Australian Design Rules for Vehicles as made
This instrument specifies requirements for seats, their attachment assemblies, their installation and any head restraint fitted, to minimise the possibility of occupant injury due to forces acting on the seat as a result of vehicle impact.
Administered by: Infrastructure, Transport, Regional Development, Communications and the Arts
General Comments: This standard was originally made under section 7 of the Motor Vehicle Standards Act 1989 and from 1 July 2021 continues in force as if it were a national road vehicle standard determined under section 12 of the Road Vehicle Standards Act 2018 (see Schedule 3, Part 2, item 2 of the Road Vehicle Standards (Consequential and Transitional Provisions) Act 2018).
Exempt from sunsetting by the Legislation (Exemptions and Other Matters) Regulation 2015 s12 item 56C
Registered 12 Oct 2017
Tabling HistoryDate
Tabled HR16-Oct-2017
Tabled Senate16-Oct-2017
This Legislative Instrument has been subject to a Motion to Disallow:
Motion Date:
07-Dec-2017
Expiry Date:
28-Mar-2018
House:
Senate
Details:
Full
Resolution:
Withdrawn
Resolution Date:
08-Feb-2018
Resolution Time:
Provisions:

Use the form below to order print copies of the selected document. Orders are normally dispatched within 3 business days of payment. For more important information about production standards see print copies. For information about the rules for printing copyright material or selling items with the Commonwealth coat of arms without permission, see copyright.

Select All
Legislative Instrument
Vehicle Standard (Australian Design Rule 3/04 – Seats and Seat Anchorages) 2017
44 pages
Select All
Explanatory Statement
Vehicle Standard (Australian Design Rule 3/04 – Seats and Seat Anchorages) 2017 - Explanatory Statement
5 pages
Select All
Replacement Explanatory Statement
Vehicle Standard (Australian Design Rule 3/04 – Seats and Seat Anchorages) 2017 - Replacement Explanatory Statement
6 pages
Quantity and Options

All Acts are produced in B5 and most Regulations in A4, conforming with original document specifications, with a cardboard cover and stapled or perfect bound depending on the number of pages in the document. The covers are produced in black and white and, if 144 pages or more, will have the title on the spine.

There are number of options available at an additional cost that can be selected when placing an order. The drilling option provides either the standard 4 hole pattern on A4 size copies or the Commonwealth legal 4 hole pattern on B5 size copies. Other options are wire or comb binding, a celloglaze or vellum cover, or with colour pages printed in colour. Delivery can be by normal or express post or you can collect your order at the LitSupport Offices in Victoria, New South Wales, Western Australia or Queensland. There are also options available to request special cover artwork or courier delivery. Some options will require you to contact LitSupport (TIMG) first to discuss your requirements and request a quote.

You must select at least one item before continuing.

The Print On Demand service is managed by a commercial provider, LitSupport (TIMG). The Add to Cart button will take you to the shopping cart function provided by LitSupport (TIMG) where you can check out as a guest or set up an account with them to manage your orders. This account will be separate from the MyAccount service provided on the Federal Register of Legislation.

If you require further assistance with ordering please email or ring LitSupport (TIMG) on 07 3223 9225 between 8.30am and 9.00pm AEST on weekdays.

You are ordering an item that is NOT In Force or NOT Latest Version, continue to Add Item to Cart? true