Federal Register of Legislation - Australian Government

Primary content

ADR 85/00 Standards/Australian Design Rules for Vehicles as made
This standard is being made to reduce the risk of serious and fatal injury of vehicle occupants in side impact crashes by limiting the forces, accelerations and deflections measured by anthropomorphic test devices in pole side impact crash tests and by other means.
Administered by: Infrastructure, Transport, Regional Development and Communications
General Comments: This standard was originally made under section 7 of the Motor Vehicle Standards Act 1989 and from 1 July 2021 continues in force as if it were a national road vehicle standard determined under section 12 of the Road Vehicle Standards Act 2018 (see Schedule 3, Part 2, item 2 of the Road Vehicle Standards (Consequential and Transitional Provisions) Act 2018).
Exempt from sunsetting by the Legislation (Exemptions and Other Matters) Regulation 2015 s12 item 56C
Registered 23 Dec 2015
Tabling HistoryDate
Tabled HR02-Feb-2016
Tabled Senate02-Feb-2016
Help with file formats Help with file formats
Legislative Instrument
 
F2015L02109 : Authoritative PDF Document : 2.1MB Primary Document Icon F2015L02109 : ZIP Document : 1.3MB
48 pages
 

Explanatory Statement
 
F2015L02109ES : PDF Document : 0.6MB Primary Document Icon F2015L02109ES : ZIP Document : 18KB
5 pages
 

Supporting Material
Regulation Impact Statement
 
F2015L02109SMN01 : PDF Document : 8.7MB Primary Document Icon F2015L02109SMN01 : ZIP Document : 5.4MB
153 pages