Federal Register of Legislation - Australian Government

Primary content

CASA EX210/15 Exemptions as made
This instrument exempts Australian fixed-wing aircraft and rotorcraft with a maximum take-off weight of less than 5 700 kilograms operating within Australian territory from various marking and identification plate requirements. The exemption is subject to conditions that CASA considers necessary in the interests of aviation safety.
Administered by: Infrastructure and Regional Development
Exempt from sunsetting by the Legislation (Exemptions and Other Matters) Regulation 2015 s12 item 15
Registered 17 Dec 2015
Tabling HistoryDate
Tabled HR02-Feb-2016
Tabled Senate02-Feb-2016
Date of repeal 03 Jul 2016
Repealed by Self Repealing

Instrument number CASA EX210/15

I, CRAIG JORDAN, Acting Executive Manager, Industry Permissions Division, a delegate of CASA, make this instrument under regulation 11.160 of the Civil Aviation Safety Regulations 1998 (CASR 1998).

[Signed Craig S. Jordan]

Craig S. Jordan
Acting Executive Manager
Industry Permissions Division

15 December 2015

1          Duration

                 This instrument:

(a)   commences on 1 January 2016; and

(b)   expires at the end of 3 July 2016 as if it had been repealed by another instrument.

2          Application

                 This instrument applies to Australian fixed-wing aircraft and rotorcraft with maximum take-off weight of less than 5 700 kg operating wholly within Australian territory (the aircraft).

3          Exemption

                 The aircraft is exempt from compliance with the following requirements:

(a)   subregulation 45.045 (1) of CASR 1998 to the extent mentioned in Schedule 1;

(b)   subregulation 45.145 (1) of CASR 1998 subject to the condition mentioned in Schedule 2;

(c)   subparagraph 45.065 (3) (b) (ii) and item 1 of paragraph 45.065 (3) (c) of CASR 1998 subject to the condition mentioned in Schedule 3.

Schedule 1          Extent of exemption

              The exemption extends only to display markings on the under surface of the port wing or across the under surface of both wings.

Schedule 2          Condition

              The aircraft must carry a manufacturer’s data plate as required by regulation 21.820 of CASR 1998.

Schedule 3          Condition

                   The minimum height must be 150 millimetres.