Federal Register of Legislation - Australian Government

Primary content

Standards/Other as made
This standard amends the Competition and Consumer (Tobacco) Information Standard 2011 to remove the legal requirement for retailers of most tobacco products to rotate the health warnings on the retail packaging of tobacco products.
Administered by: Treasury
Exempt from sunsetting by the Legislative Instruments Act 2003 s 54(1)
Registered 25 Jul 2013
Tabling HistoryDate
Tabled HR12-Nov-2013
Tabled Senate12-Nov-2013
Date of repeal 27 Jul 2013
Repealed by Division 1 of Part 5A of the Legislative Instruments Act 2003

REPLACEMENT explanatory STATEMENT

Issued by the Authority of the Assistant Treasurer

 

Consumer (Tobacco) Amendment (Rotation of Health Warnings) Information Standard 2013

Overview

 

This Legislative Instrument amends an existing information standard to remove the legal requirement for retailers of most tobacco products to rotate the health warnings on the retail packaging of tobacco products. The obligation for manufacturers and importers of tobacco products remains in place. The existing provisions for the rotation of health warnings prescribed in the Competition and Consumer (Tobacco) Information Standard 2011 applied to all suppliers and this was determined to be too onerous on retailers, both operationally and financially. 

 

Background

Legislative Power

The Trade Practices Amendment (Australian Consumer Law) Act (No.2) 2010 together with the Trade Practices Amendment (Australian Consumer Law) Act (No.1) 2010, amended the Trade Practices Act 1974 (TPA) to implement a new national consumer law regime known as the Australian Consumer Law (ACL). The TPA was renamed the Competition and Consumer Act 2010 (CCA) on 1 January 2011. The ACL forms Schedule 2 to the CCA.

Subsection 134(1) of Schedule 2 to the CCA provides that the Commonwealth Minister may, by written notice published on the internet, make an information standard for consumer goods of a particular kind that require the provision of specified information about the goods.

Subsection 136(1) provides that a person must not, in trade or commerce, supply consumer goods of a particular kind if an information standard for consumer goods of that kind is in force and those goods do not comply with the standard.

Commencement

This legislative Instrument commences on the day after it is registered.

Disallowance

This legislative instrument is not subject to disallowance due to section 44 of the Legislation Act 2003.

Sunsetting

This legislative instrument is not subject to sunsetting due to section 54 of the Legislation Act 2003.

Overview of the Legislative Instrument

This Legislative Instrument amends an information standard concerning the supply of tobacco products in retail packaging displaying health warnings in rotation. It revokes the former responsibility of rotation on retailers and applies this to manufacturers and importers of tobacco products in Australia. To make this obligation on manufacturers and importers clear, the following amendments have been made:

 

·         Subsection 1.3(1) includes the definition of ‘manufacturer’ noting that ‘manufacture’ has a corresponding meaning.

 

·         Section 2.1 has modified clause (3) to clarify the requirements for retailers who place single cigars into retail packaging.

 

·         Subsections 9.5(3), 9.6(2) and 9.7(2) have been repealed as they refer to requirements for the time period 1 January 2012 to 30 November 2012 which are now redundant.

 

·         Subsections 9.5(4), (5), (6) and (7), 9.6(3) and (4) and 9.7(3) and (4) omit the words “on retail packaging supplied” and substitute “on retail packaging of tobacco products manufactured in, or imported into, Australia”.

 

·         Subsection 9.5(8) after “retail packaging” inserts “of tobacco products manufactured in, or imported into, Australia”.

·         A subsection 9.7A has been included for the purposes of clarifying the point in which the date of the rotation of health warnings on tobacco products manufactured in Australia and imported into Australia is determined.

 

Consultation

For the purposes of section 17 of the LIA, consultation has been undertaken concerning the product safety standard.

A draft of the Legislative Instrument was circulated for consideration by interested parties, including manufacturers/importers and retailers of tobacco products, and relevant government agencies. Parties who made submissions were either supportive of the final changes or did not oppose them.