Federal Register of Legislation - Australian Government

Primary content

AEB 13/1815 Approvals as made
This instrument provides the operator of Bombardier Inc. aeroplanes registered in Australia with a means of compliance with Canadian Airworthiness Directive CF 2011-03R2.
Administered by: Infrastructure, Transport, Regional Development and Communications
General Comments: This instrument ceases to have effect if Canadian Airworthiness Directive CF 2011-03R2 is amended or cancelled.
Exempt from sunsetting by the Legislation (Exemptions and Other Matters) Regulation 2015 s12 item 15
Registered 04 Apr 2013
Tabling HistoryDate
Tabled HR14-May-2013
Tabled Senate14-May-2013

Instrument number AEB 13/1815

I, MICHAEL JAMES HIGGINS, Manager Continuing Airworthiness Section, Airworthiness and Engineering Standards Branch, Standards Division, a delegate of CASA, make this instrument under paragraph 39.004(3)(a) of the Civil Aviation Safety Regulations 1998.

[Signed M. Higgins]

Mike Higgins
Manager Continuing Airworthiness Section
Airworthiness and Engineering Standards Branch
Standards Division

29 March 2013

Approval — means of compliance with Airworthiness Directive for Bombardier aircraft

1          Duration

                 This instrument:

(a)   commences on the day of registration; and

(b)   ceases to have effect if Canadian Airworthiness Directive CF 2011-03R2 (the AD) is amended or cancelled.

2          Application

                 This instrument applies to any Bombardier Inc. aeroplane registered in Australia and engaged in commercial passenger-carrying operations within Australian territory (the aircraft).

3          Approved means of compliance

                 I approve for the aircraft, as a means of compliance with the AD other than that set out in the AD, the retention of any original chemical oxygen generator installed in any lavatory.