Federal Register of Legislation - Australian Government

Primary content

Standards/Other as made
This standard amends the Telecommunications Technical Standard (Analogue Interworking and Non-interference Requirements for Customer Equipment for Connection to the Public Switched Telephone Network - AS/CA S002:2010) 2011 (the current ACMA standard) to adopt an amendment made to the industry standard, AS/CA S002:2010 Analogue interworking and non-interference requirements for Customer Equipment for connection to the Public Switched Telephone Network (the CA Standard) in April 2012 by Communications Alliance Ltd (CA).
Administered by: Broadband, Communications and the Digital Economy
Registered 20 Sep 2012
Tabling HistoryDate
Tabled Senate09-Oct-2012
Tabled HR09-Oct-2012
Date of repeal 09 Aug 2013
Repealed by Broadband, Communications and the Digital Economy (Spent and Redundant Instruments) Repeal Regulation 2013

The AUSTRALIAN COMMUNICATIONS AND MEDIA AUTHORITY makes this Technical Standard under subsection 376 (1) of the Telecommunications Act 1997.

Dated 14th September 2012

Chris Chapman
[signed]
Member

Richard Bean
[signed]
Member/General Manager


1              Name of Technical Standard

                This Technical Standard is the Telecommunications Technical Standard (Analogue Interworking and Non-interference Requirements for Customer Equipment for Connection to the Public Switched Telephone Network – AS/CA S002:2010) Amendment 2012 (No.1).  

2              Commencement

                This Technical Standard commences on the day after it is registered.

Note All legislative instruments and compilations are registered on the Federal Register of Legislative Instruments kept under the Legislative Instruments Act 2003. See http://www.frli.gov.au.

3              Amendment of Telecommunications Technical Standard (Analogue Interworking and Non-interference Requirements for Customer Equipment for Connection to the Public Switched Telephone Network – AS/CA S002:2010) 2011 

                Schedule 1 amends the Telecommunications Technical Standard (Analogue Interworking and Non-interference Requirements for Customer Equipment for Connection to the Public Switched Telephone Network – AS/CA S002:2010) 2011.         

 

Schedule 1   Amendment

                        (section 3)

 

[1]            Section 6

                substitute

                6      Requirement

Customer equipment must comply with the mandatory requirements set out in the Australian Standard — Analogue interworking and non-interference requirements for Customer Equipment for connection to the Public Switched Telephone Network (AS/CA S002:2010), published by Communications Alliance Ltd in October 2010, and incorporating the amendment made to the standard of that name published on 23 April 2012.

            Note       Amendment No.1/2012 to AS/CA S002:2010 was published by Communications Alliance Ltd on 23 April 2012. The amendment corrects an error in ‘Figure 8’ of the standard.

.