Federal Register of Legislation - Australian Government

Primary content

Designations as made
This designation lists goods that are items of particular concern if destined for end users in Syria and that are export sanctioned goods for the purpose of the Autonomous Sanctions Regulations 2011.
Administered by: Foreign Affairs and Trade
Made 21 Aug 2012
Registered 24 Aug 2012
Tabled HR 10 Sep 2012
Tabled Senate 10 Sep 2012
Table of contents.

Autonomous Sanctions (Export Sanctioned Goods – Syria) Designation 2012

Autonomous Sanctions Regulations 2011

I, BOB CARR, Minister for Foreign Affairs, make this Designation under regulation 4 of the Autonomous Sanctions Regulations 2011.

Dated         21 August 2012

BOB CARR


Contents

                         

                        1      Name of Designation                                                                          2

                        2      Commencement                                                                                  2

                        3      Definitions                                                                                          2

                        4      Designation of export sanctioned goods                                             2

Schedule 1                  List of goods                                                                                     3

Part 1                             Items of particular concern if destined for end users in Syria                 3

Division 1                     Materials, chemicals, micro‑organisms and toxins                                3

Division 2                     Materials Processing                                                                           3

 

1              Name of Designation

                This Designation is the Autonomous Sanctions (Export Sanctioned Goods – Syria) Designation 2012.

2              Commencement

                This Designation commences on the day after it is registered.

3              Definitions

                In this Designation:

CAS means a Chemical Abstract Number.

4              Designation of export sanctioned goods

                For regulation 4 of the Autonomous Sanctions Regulations 2011, Schedule 1 lists goods designated to be export sanctioned goods for Syria.

 


Schedule 1        List of goods

(section 4)

Part 1          Items of particular concern if destined for end users in Syria

Division 1       Materials, chemicals, micro‑organisms and toxins

Item

Description

CAS No.

1.

Aluminum chloride

7446-70-0

2.

Dichloromethane

75-09-2

3.

N,N-Dimethylaniline

121-69-7

4.

Isopropyl bromide

75-26-3

5.

Isopropyl ether

108-20-3

6.

Monoisopropylamine

75-31-0

7.

Potassium Bromide

7758-02-3

8.

Pyridine

110-86-1

9.

Sodium bromide

7647-15-6

10.

Sodium metal

7440-23-5

11.

Tributylamine

102-82-9

12.

Triethylamine

121-44-8

13.

Trimethylamine

75-50-3

14.

Diethylenetriamine

111-40-0

15.

Butyrylcholinesterase (BCHE)

 

16.

Pyridostigmine bromide

101-26-8

17.

Obidoxime chloride

114-90-9

Division 2       Materials Processing

Item

Description

1.

Floor-mounted fume hoods (walk-in style) with a minimum nominal width of 2.5 meters.

2.

Full face-mask air-purifying and air-supplying respirators.

3.

Class II biosafety cabinets and glove boxes.

4.

Batch centrifuges with a rotor capacity of 4 L or greater, usable with biological materials.

5.

Fermenters with an internal volume of 10 L – 20 L, usable with biological materials.

6.

Conventional or turbulent air-flow clean-air rooms and self-contained fan-HEPA filter units that may be used for P3 or P4 (BSL 3, BSL 4, L3, L4) containment facilities.

7.

Reaction vessels or reactors, with or without agitators, with total internal (geometric) volume greater than 0.1 m³ (100 l) and less than 20 m³ (20000 l).

8.

Agitators for use in reaction vessels or reactors specified in item 7.

9.

Impellers, blades or shafts designed for agitators specified in item 8.

10.

Heat exchangers or condensers with a heat transfer surface area of greater than 0.15 m², and less than 20 m².

11.

Tubes, plates, coils or blocks (cores) designed for heat exchangers or condensers specified in item 10.

12.

Multiple-seal, single seal and seal-less pumps with manufacturer's specified maximum flow-rate greater than 0.6 m3/h.

13.

Valves with nominal sizes greater than 1.0 cm

14.

Casings (valve bodies) or preformed casing liners designed for valves specified in item 13.

Technical note: The 'nominal size' is defined as the smaller of the inlet and outlet port diameters.

15.

Storage tanks, containers or receivers with a total internal (geometric) volume greater than 0.1 m³ (100 l).

16.

Distillation or absorption columns of internal diameter greater than 0.1 m.

17.

Liquid distributors, vapour distributors or liquid collectors designed for distillation or absorption columns specified in item 16.

18.

Vacuum pumps with manufacturer's specified maximum flow-rate greater than 5 m³/h (under standard temperature (273 K (0o C)) and pressure (101.3 kPa) conditions), in which all surfaces that come into direct contact with the chemical(s) being processed are made from any of the following materials:

   (a)  nickel or alloys with more than 40% nickel by weight;

  (b)  alloys with more than 25% nickel and 20% chromium by weight;

   (c)  fluoropolymers (polymeric or elastomeric materials with more than 35% fluorine by weight);

  (d)  glass or glass-lined (including vitrified or enamelled coating);

   (e)  graphite or carbon-graphite;

   (f)  tantalum or tantalum alloys;

   (g)  titanium or titanium alloys;

  (h)  zirconium or zirconium alloys;

   (i)  ceramics;

   (j)  ferrosilicon (high silicon iron alloys); or

  (k)  niobium (columbium) or niobium alloys.

Technical note: carbon-graphite is a composition consisting of amorphous carbon and graphite, in which the graphite content is eight percent or more by weight.

19.

Casings (pump bodies), preformed casing liners, impellers, rotors or jet pump nozzles designed for vacuum pumps specified in item 18.