Federal Register of Legislation - Australian Government

Primary content

ADR 58/00 Amdt 1 Standards/Australian Design Rules for Vehicles as made
This instrument amends the Vehicle Standard (Australian Design Rule 58/00 - Requirements for Omnibuses Designed for Hire and Reward) 2006 to include an alternative standard which allows manufacturers of small omnibuses, having a capacity not exceeding 15 seating positions, including the driver, to comply with the technical requirements of United Nations - Economic Commission for Europe Regulation No. 52 - Uniform Provisions Concerning the Approval of M2 and M3 Small Capacity Vehicles with Regard to their General Construction.
Administered by: Infrastructure and Transport
Exempt from sunsetting by the Legislative Instruments Act 2003 s 54(2) item 24
Made 21 May 2012
Registered 28 May 2012
Tabled HR 30 May 2012
Tabled Senate 18 Jun 2012
Date of repeal 19 Mar 2014
Repealed by Infrastructure and Regional Development (Spent and Redundant Instruments) Repeal Regulation 2014

 

 

 

 

Vehicle Standard (Australian Design Rule 58/00 – Requirements for Omnibuses Designed for Hire and Reward) 2006 Amendment 1

I, CATHERINE KING, Parliamentary Secretary for Infrastructure and Transport, determine this vehicle standard under subsection 7 of the Motor Vehicle Standards Act 1989.

 

 

 

 

Dated                          21  MAY         2012

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

[Signed]

 

Catherine King

 

Parliamentary Secretary for Infrastructure and Transport


 


CONTENTS

 

1................ legislative provisions. 3

2................ amendment of vehicle standard.. 3

Schedule 1. 4

 

 


1.                                          legislative provisions

1.1.                                    Name of Legislative Instrument

1.1.1.                              This instrument is the Vehicle Standard (Australian Design Rule 58/00 – Requirements for Omnibuses Designed for Hire and Reward) 2006 Amendment 1.

1.2.                                    Commencement

1.2.1.                              This instrument commences on the day after it is registered.

2.                                          amendment of vehicle standard

2.1.                                    The changes specified in Schedule 1 amend Vehicle Standard (Australian Design Rule 58/00 – Requirements for Omnibuses Designed for Hire and Reward) 2006.

 

 


Schedule 1

[1]               Insert new clause      “4. Alternative Standard

The technical requirements of United Nations - Economic Commission for Europe Regulation No. 52 - Uniform Provisions Concerning the Approval of M2 and M3 Small Capacity Vehicles with Regard to their General Construction incorporating 01 series of amendments shall be deemed to be equivalent to the technical requirements of this standard in the case of a ‘Small Omnibus’ having an occupant capacity of up to 15 persons, including the driver.”

[2]                                                                                 Clause 58.2      rename “REQUIREMENTS”

[3]                                                                                 Clause 58.2      remove text.

[4]                                                                                 Insert clause 58.2.1 to read “Where the term omnibus is used in the following clauses, the requirements are applicable to both ‘Small Omnibus’ and ‘Large Omnibus’.”

[5]                                                                                 Insert clause 58.2.2 to read ““Small Omnibus” – an omnibus having an occupant capacity of up to 25 persons, including the driver.”

[6]                                                                                 Insert clause 58.2.3 to read ““Large Omnibus” – an omnibus having an occupant capacity of over 25 persons, including the driver.”