Federal Register of Legislation - Australian Government

Primary content

Standards/Australian Design Rules for Vehicles as made
This instrument amends the Vehicle Standard (Australian Design Rule - Harmonisation) 2012 to correct an error in order to better align the operation of ADR – Harmonisation with its intended operation as detailed in the original Regulation Impact Statement (RIS) for the determination of ADR – Harmonisation.
Administered by: Infrastructure and Transport
Exempt from sunsetting by the Legislative Instruments Act 2003 s 54(2) item 24
Registered 24 May 2012
Tabling HistoryDate
Tabled HR28-May-2012
Tabled Senate18-Jun-2012
Date of repeal 19 Mar 2014
Repealed by Infrastructure and Regional Development (Spent and Redundant Instruments) Repeal Regulation 2014
Table of contents.

 

 

 

Vehicle Standard (Australian Design Rule – Harmonisation) 2012 Amendment 1

I, CATHERINE KING, Parliamentary Secretary for Infrastructure and Transport, determine this vehicle standard under subsection 7 of the Motor Vehicle Standards Act 1989.

 

 

 

 

Dated              20 / 5 /2012                

                       

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

[Signed]

 

Catherine King

 

Parliamentary Secretary for Infrastructure and Transport


 

CONTENTS

 

1.           legislative provisions. 3

2.           amendment of vehicle standard.. 3

Schedule 1. 4

 


1.                                          legislative provisions

1.1.                                    Name of Legislative Instrument

1.1.1.                              This instrument is the Vehicle Standard (Australian Design Rule – Harmonisation) 2012 Amendment 1.

1.2.                                    Commencement

1.2.1.                              This instrument commences on the day after it is registered.

2.                                          amendment of vehicle standard

2.1.                                    The changes specified in Schedule 1 amend Vehicle Standard (Australian Design Rule – Harmonisation) 2012.

Schedule 1

[1]               Clause 5.1 (c) amend to read:

“the approval corresponds to:

(i)            where Australia applies the UNECE Regulation, the same version of the UNECE Regulation as specified in the alternative standard or the UNECE Regulation in force from time to time; or

(ii)          where Australia does not apply the UNECE Regulation, the same version of the UNECE Regulation as specified in the alternative standard.”