Federal Register of Legislation - Australian Government

Primary content

SLI 2011 No. 212 Regulations as made
These Regulations amend the Product Stewardship (Televisions and Computers) Regulations 2011 to require that a material recovery target of 90 percent be achieved by a co-regulatory arrangement under the National Television and Computer Recycling Scheme each financial year commencing from 2014-15.
Administered by: Sustainability, Environment, Water, Population and Communities
Registered 28 Nov 2011
Tabling HistoryDate
Tabled HR07-Feb-2012
Tabled Senate07-Feb-2012
Date of repeal 19 Mar 2014
Repealed by Environment (Spent and Redundant Instruments) Repeal Regulation 2014

Commonwealth Coat of Arms

Product Stewardship (Televisions and Computers) Amendment Regulations 2011 (No. 1)1

Select Legislative Instrument 2011 No. 212

I, QUENTIN BRYCE, Governor-General of the Commonwealth of Australia, acting with the advice of the Federal Executive Council, make the following Regulations under the Product Stewardship Act 2011.

Dated 23 November 2011

QUENTIN BRYCE

Governor-General

By Her Excellency’s Command

DON FARRELL


1              Name of Regulations

                These Regulations are the Product Stewardship (Televisions and Computers) Amendment Regulations 2011 (No. 1).

2              Commencement

                These Regulations commence on the day after they are registered.

3              Amendment of Product Stewardship (Televisions and Computers) Regulations 2011

                Schedule 1 amends the Product Stewardship (Televisions and Computers) Regulations 2011.


Schedule 1        Amendments

(regulation 3)

 

[1]           Subregulation 1.03 (1), after definition of manufacture

insert

material recovery target means the proportion of products in a class of products to be sent after recycling for processing into useable materials in a particular financial year, worked out under regulation 3.06.

[2]           Paragraph 3.01 (1) (b)

omit

met.

insert

met;

[3]           After paragraph 3.01 (1) (b)

insert

                (c)    in the financial year starting on 1 July 2014, and in each subsequent financial year, the material recovery target worked out under regulation 3.06 must be met.

[4]           Subregulation 3.01 (2)

after

outcomes

insert

mentioned in paragraphs (1) (a) and (b)

[5]           After Division 3.3

insert

Division 3.4           Material recovery from recycling

3.06        Material recovery target

                The material recovery target is 90% of the products in a class of products, based on weight.


Note

1.       All legislative instruments and compilations are registered on the Federal Register of Legislative Instruments kept under the Legislative Instruments Act 2003. See http://www.frli.gov.au.