Federal Register of Legislation - Australian Government

Primary content

AD/BELL 222/39 Airworthiness Directives/Pt 105 — Aircraft as made
Flapping Bearing-to-Yoke Attachment Bolts
Administered by: Infrastructure, Transport, Regional Development and Communications
Exempt from sunsetting by the Legislation (Exemptions and Other Matters) Regulation 2015 s12 item 15
Registered 07 Aug 2007
Tabling HistoryDate
Tabled HR08-Aug-2007
Tabled Senate09-Aug-2007



For the reasons set out in the background section, the CASA delegate whose signature appears below issues the following Airworthiness Directive (AD) under subregulation 39.001(1) of CASR 1998.  The AD requires that the action set out in the requirement section (being action that the delegate considers necessary to correct the unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in the compliance section.

Bell Helicopter Textron Canada (BHTC) 222 Series Helicopters

AD/BELL 222/39

Flapping Bearing-to-Yoke Attachment Bolts




Model 230 helicopters, serial numbers 23001 through 23038.


Action in accordance with Transport Canada AD CF-99-13.


Unless the initial inspection is already accomplished, before 30 September 2007.


This Airworthiness Directive becomes effective on 30 August 2007.


A post-flight inspection revealed that one of the four flapping bearing-to-yoke attachment bolts had fractured.

David Villiers
Delegate of the Civil Aviation Safety Authority

11 July 2007