Federal Register of Legislation - Australian Government

Primary content

Standards/Australian Design Rules for Vehicles as made
This instrument amends Vehicle Standard (Australian Design Rule – Definitions and Vehicle Categories) 2005.
Administered by: DOTARS
Exempt from sunsetting by the Legislative Instruments Act 2003 s 54(2) item 24
Registered 18 Jul 2007
Tabling HistoryDate
Tabled HR07-Aug-2007
Tabled Senate07-Aug-2007
Date of repeal 19 Mar 2014
Repealed by Infrastructure and Regional Development (Spent and Redundant Instruments) Repeal Regulation 2014

 

 

 

 

Vehicle Standard (Australian Design Rule – Definitions and Vehicle Categories) 2005 Amendment 2

I, JAMES ERIC LLOYD, Minister for Local Government, Territories and Roads, determine this vehicle standard under subsection 7 (1) of the Motor Vehicle Standards Act 1989.

 

 

 

 

Dated   29th June 2007

 

 

 

 

 

 

 

 

 

 

[SIGNED]

 

 

 

 

 

 

James Eric Lloyd

 

Minister for Local Government, Territories and Roads


 

CONTENTS

 

1.           legislative provisions............................................................................ 3

2.           amendment of vehicle standard...................................................... 3

Schedule 1.................................................................................................................... 4

 


1.                                          legislative provisions

1.1.                                    Name of Legislative Instrument

1.1.1.                              This instrument is the Vehicle Standard (Australian Design Rule – Definitions and Vehicle Categories) 2005 Amendment 2.

1.1.2.                              This instrument may also be cited as Australian Design Rule — Definitions and Vehicle Categories Amendment 2.

1.2.                                    Commencement

1.2.1.                              This instrument commences on the day after it is registered.

2.                                          amendment of vehicle standard

2.1.                                    The changes specified in Schedule 1 amend Vehicle Standard (Australian Design Rule – Definitions and Vehicle Categories) 2005.

 

 


Schedule 1

[1]               Add the following, in alphabetical order, to 3.  DEFINITIONS

 

UNLADEN TRAILER MASS (UTM) - the mass transmitted to the ground by the ‘Axle’ or ‘Axles’ of the trailer when coupled to a drawing vehicle and in its normal unladen condition, and at which compliance with the appropriate Australian Design Rules has been or can be established.