Federal Register of Legislation - Australian Government

Primary content

ADR 19/00 Standards/Australian Design Rules for Vehicles as made
This instrument amends Vehicle Standard (Australian Design Rule 19/00 - Installation of Lighting and Light-Signalling Devices on L-Group Vehicles) 2006 to correct typographical errors.
Administered by: DOTARS
Exempt from sunsetting by the Legislative Instruments Act 2003 s 54(2) item 24
Registered 13 Dec 2006
Tabling HistoryDate
Tabled HR06-Feb-2007
Tabled Senate06-Feb-2007
Date of repeal 19 Mar 2014
Repealed by Infrastructure and Regional Development (Spent and Redundant Instruments) Repeal Regulation 2014

 

 

 

 

Vehicle Standard (Australian Design Rule 19/00 – Installation of Lighting and Light-Signalling Devices on L-Group Vehicles) 2006 Amendment 1

I, JAMES ERIC LLOYD, Minister for Local Government, Territories and Roads, determine this vehicle standard under subsection 7 (1) of the Motor Vehicle Standards Act 1989.

 

 

 

 

Dated               5 December 2006

 

 

 

 

 

 

 

 

 

[SIGNED]

 

 

 

 

 

 

 

James Eric Lloyd

 

Minister for Local Government, Territories and Roads


 

CONTENTS

 

1.           legislative provisions............................................................................ 3

2.           amendment of vehicle standard...................................................... 3

Schedule 1.................................................................................................................... 4

 


1.                                          legislative provisions

1.1.                                    Name of Legislative Instrument

1.1.1.                              This instrument is the Vehicle Standard (Australian Design Rule 19/00 – Installation of Lighting and Light-Signalling Devices on L-Group Vehicles) 2006 Amendment 1.

1.2.                                    Commencement

1.2.1.                              This instrument commences on the day after it is registered.

2.                                          amendment of vehicle standard

2.1.                                    The changes specified in Schedule 1 amend Vehicle Standard (Australian Design Rule 19/00 – Installation of Lighting and Light-Signalling Devices on L-Group Vehicles) 2006.

 

 


Schedule 1

[1]               Purpose and Scope, replace “moor” with “motor”.

[2]               Clause 19.6.101.3, replace “poston” with “position”.

[3]               Annex A, clause 19.6.1.5, amend to read ”For ‘LB2’ and ‘LE2’ category vehicles, the lamp may not move with the steering.”

[4]               Annex A, clause 19.6.2.1.4, amend to read “in the case of ’LB2’ category vehicles, 2 lamps to either ADR 54/... or ECE R 76/00.”