Federal Register of Legislation - Australian Government

Primary content

ADR 19/01 Standards/Australian Design Rules for Vehicles as made
This is a vehicle standard determined under section 7 of the Motor Vehicle Standards Act 1989 providing requirements for the installation of lighting and light-signalling devices on mopeds, motor cycles and motor tricycles.
Administered by: DOTARS
General Comments: This Standard repeals each vehicle standard with the name Australian Design Rule 19/01 — Installation of Lighting and Light Signalling Devices on L-Group Vehicles that is: (a) made under section 7 of the Motor Vehicle Standards Act 1989; and (b) in force at the commencement of this Standard. This Standard also repeals each instrument made under section 7 of the Motor Vehicle Standards Act 1989 that creates a vehicle standard with the name Australian Design Rule 19/01 — Installation of Lighting and Light Signalling Devices on L-Group Vehicles, if there are no other vehicle standards created by that instrument, or amendments to vehicle standards made by that instrument, that are still in force at the commencement of this Standard.
Exempt from sunsetting by the Legislative Instruments Act 2003 s 54(2) item 24
Registered 28 Aug 2006
Tabling HistoryDate
Tabled HR04-Sep-2006
Tabled Senate04-Sep-2006
Date of repeal 23 May 2007
Repealed by Vehicle Standard (Australian Design Rule 19/01 – Installation of Lighting and Light-Signalling Devices on L-Group Vehicles) 2007
Enabled by
TitleRegisterIdNumber
Authoritative version Motor Vehicle Standards Act 1989
C2004A03813No. 65, 1989