Federal Register of Legislation - Australian Government

Primary content

ADR 43/00 Standards/Australian Design Rules for Vehicles as made
A vehicle standard determined under section 7 of the Motor Vehicle Standards Act 1989 providing requirements for vehicle configuration and marking.
Administered by: Infrastructure, Transport, Regional Development and Communications
General Comments: This standard was originally made under section 7 of the Motor Vehicle Standards Act 1989 and from 1 July 2021 continues in force as if it were a national road vehicle standard determined under section 12 of the Road Vehicle Standards Act 2018 (see Schedule 3, Part 2, item 2 of the Road Vehicle Standards (Consequential and Transitional Provisions) Act 2018).

This standard repeals each vehicle standard with the name Australian Design Rule 43/00 — Vehicle Configuration and Marking that is: (a) made under section 7 of the Motor Vehicle Standards Act 1989; and (b) in force at the commencement of this standard. This standard also repeals each instrument made under section 7 of the Motor Vehicle Standards Act 1989 that creates a vehicle standard with the name Australian Design Rule 43/00 — Vehicle Configuration and Marking, if there are no other vehicle standards created by that instrument, or amendments to vehicle standards made by that instrument, that are still in force at the commencement of this standard.
Exempt from sunsetting by the Legislation (Exemptions and Other Matters) Regulation 2015 s12 item 56C
Registered 18 Aug 2006
Tabling HistoryDate
Tabled HR04-Sep-2006
Tabled Senate04-Sep-2006
Help with file formats Help with file formats
Legislative Instrument
 
F2006L02743 : Authoritative PDF Document : 0.3MB Primary Document Icon F2006L02743 : ZIP Document : 57KB
11 pages
 

Explanatory Statement
 
F2006L02743ES : PDF Document : 22KB Primary Document Icon F2006L02743ES : ZIP Document : 12KB
5 pages
 

Incorporated Documents
ADR 13 - Installation of Lighting and Light-signalling Devices

ADR 24 – Tyre and Rim Selection : s 34.3.3.1

Vehicle Standard (Australian Design Rule – Definitions and Vehicle Categories) 2005