Federal Register of Legislation - Australian Government

Primary content

ADR 46/00 Standards/Australian Design Rules for Vehicles as made
This is a vehicle standard determined under section 7 of the Motor Vehicle Standards Act 1989 providing requirements for Headlamps.
Administered by: Infrastructure, Transport, Regional Development and Communications
General Comments: This Standard repeals each vehicle standard with the name Australian Design Rule 46/00 — Headlamps that is: (a) made under section 7 of the Motor Vehicle Standards Act 1989; and (b) in force at the commencement of this Standard. This Standard also repeals each instrument made under section 7 of the Motor Vehicle Standards Act 1989 that creates a vehicle standard with the name Australian Design Rule 46/00 — Headlamps, if there are no other vehicle standards created by that instrument, or amendments to vehicle standards made by that instrument, that are still in force at the commencement of this Standard.
Exempt from sunsetting by the Legislation (Exemptions and Other Matters) Regulation 2015 s12 item 40
Registered 21 Jul 2006
Tabling HistoryDate
Tabled HR08-Aug-2006
Tabled Senate08-Aug-2006
Help with file formats Help with file formats
Legislative Instrument
 
F2006L02294 : Authoritative PDF Document : 3.8MB Primary Document Icon F2006L02294 : ZIP Document : 2.8MB
259 pages
 

Explanatory Statement
 
F2006L02294ES : PDF Document : 25KB Primary Document Icon F2006L02294ES : ZIP Document : 13KB
6 pages
 

Incorporated Documents
UNECE Regulation No 8 – UNIFORM PROVISIONS CONCERNING THE APPROVAL OF MOTOR VEHICLE HEADLAMPS EMITTING AN ASSYMERICAL PASSING BEAM OR A DRIVING BEAM OR BOTH AND EQUIPPED WITH HALOGEN FILAMENT LAMPS (H1, H2, H3, HB3, HB4, H7, H8 and/or H1R1) from the edition incorporating the 03 series of amendments up to and including the edition incorporating the 04 series of amendments : s7.3

Japanese Industrial Standard D5500-1995, “Lighting and Signalling Equipment for Automobiles” : s7.8

UNECE Regulation 112 – UNIFORM PROVISIONS CONCERNING THE APPROVAL OF MOTOR VEHICLE HEADLAMPS EMITTING AN ASYMMETRICAL PASSING BEAM OR A DRIVING BEAM OR BOTH AND EQUIPPED WITH FILAMENT LAMPS, incorporated under the 00 series of amendments : s7.6

UNECE Regulation No 1 – UNIFORM PROVISIONS CONCERNING THE APPROVAL OF MOTOR VEHICLE HEADLAMPS EMITTING AN ASSYMERICAL PASSING BEAM AND/OR A DRIVING BEAM AND EQUIPPED WITH FILAMENT LAMPS OF CATEGORY R2 AND /OR from the edition incorporating the 01 series of amendments : s7.1

UNECE Regulation No 5 – UNIFORM PROVISIONS FOR THE APPROVAL OF MOTOR VEHICLE “SEALED BEAM HEADLAMPS” EMITTING AN ASSYMERICAL PASSING BEAM AND/OR A DRIVING BEAM OR BOTH from the edition incorporating the 01 series of amendments : s7.2

UNECE Regulation No 31 – UNIFORM PROVISIONS CONCERNING THE APPROVAL OF HALOGEN SEALED BEAM UNIT (HSB) MOTOR VEHICLE HEADLAMPS EMITTING AN ASSYMERICAL PASSING BEAM OR A DRIVING BEAM OR BOTH from the edition incorporating the 01 series of amendments and up to the edition incorporating the 02 series of amendments : s7.5

SAE Standard J579c, December 1978, “Sealed Beam Headlamp Units for Motor Vehicles” : s7.7

ADR 19 – Installation of Lighting and Light Signalling Devices on L-Group Vehicles : s2.1

ADR 13 – Installation of Lighting and Light Signalling Devices on Other than L-Group Vehicles : s2.1

UNECE Regulation No 20 – UNIFORM PROVISIONS CONCERNING THE APPROVAL OF MOTOR VEHICLE HEADLAMPS EMITTING AN ASSYMERICAL PASSING BEAM OR A DRIVING BEAM OR BOTH AND EQUIPPED WITH HALOGEN FILAMENT LAMPS (H4 LAMPS) from the edition incorporating the 01 series of amendments and up to the edition incorporating the 02 series of amendments : s7.4

UNECE Regulation 113 – UNIFORM PROVISIONS CONCERNING THE APPROVAL OF MOTOR VEHICLE HEADLAMPS EMITTING A SYMMETRICAL PASSING BEAM OR A DRIVING BEAM OR BOTH AND EQUIPPED WITH FILAMENT LAMPS, incorporated under the 00 series of amendments : s7.7

ADR 67 – Installation of Lighting and Light Signalling Devices on Three-Wheeled Vehicles : s2.1

ADR 51 – Filament Lamps : s8.2