Federal Register of Legislation - Australian Government

Skip to primary navigation Skip to primary content
Federal Register of Legislation Skip to Content
SearchOpen search

Primary content

Bookmark

this version | go to latest

Vehicle Standard (Australian Design Rule 33/00 - Brake Systems for Motorcycles and Mopeds) 2006

Authoritative Version
ADR 33/00 Standards/Australian Design Rules for Vehicles as made
This is a vehicle standard determined under section 7 of the Motor Vehicle Standards Act 1989 providing requirements for motorcycle and moped brake systems.
Administered by: DOTARS
General Comments: This Standard repeals each vehicle standard with the name Australian Design Rule 33/00 — Brake Systems for Motorcycles and Mopeds that is: (a) made under section 7 of the Motor Vehicle Standards Act 1989; and (b) in force at the commencement of this Standard. This Standard also repeals each instrument made under section 7 of the Motor Vehicle Standards Act 1989 that creates a vehicle standard with the name Australian Design Rule 33/00 — Brake Systems for Motorcycles and Mopeds, if there are no other vehicle standards created by that instrument, or amendments to vehicle standards made by that instrument, that are still in force at the commencement of this Standard.
Exempt from sunsetting by the Legislative Instruments Act 2003 s 54(2) item 24
Registered 09 Jun 2006
Tabling HistoryDate
Tabled HR14-Jun-2006
Tabled Senate14-Jun-2006
Date of repeal 05 Sep 2007
Repealed by Vehicle Standard (Australian Design Rule 33/00 – Brake Systems for Motorcycles and Mopeds) 2007
Enabled by
TitleRegisterIdNumber
Authoritative version Motor Vehicle Standards Act 1989
C2004A03813No. 65, 1989