Federal Register of Legislation - Australian Government

Primary content

ADR 21/00 Standards/Australian Design Rules for Vehicles as made
This is a vehicle standard determined under section 7 of the Motor Vehicle Standards Act 1989 providing requirements for instrument panels.
Administered by: Infrastructure, Transport, Regional Development and Communications
General Comments: This standard was originally made under section 7 of the Motor Vehicle Standards Act 1989 and from 1 July 2021 continues in force as if it were a national road vehicle standard determined under section 12 of the Road Vehicle Standards Act 2018 (see Schedule 3, Part 2, item 2 of the Road Vehicle Standards (Consequential and Transitional Provisions) Act 2018).

This standard repeals each vehicle standard with the name Australian Design Rule 21/00 — Instrument Panel that is: (a) made under section 7 of the Motor Vehicle Standards Act 1989; and (b) in force at the commencement of this Standard. This standard also repeals each instrument made under section 7 of the Motor Vehicle Standards Act 1989 that creates a vehicle standard with the name Australian Design Rule 21/00 — Instrument Panel, if there are no other vehicle standards created by that instrument, or amendments to vehicle standards made by that instrument, that are still in force at the commencement of this standard.
Exempt from sunsetting by the Legislation (Exemptions and Other Matters) Regulation 2015 s12 item 56C
Registered 09 Jun 2006
Tabling HistoryDate
Tabled HR13-Jun-2006
Tabled Senate13-Jun-2006
Help with file formats Help with file formats
Legislative Instrument
 
F2006L01786 : Authoritative PDF Document : 0.2MB Primary Document Icon F2006L01786 : ZIP Document : 15KB
6 pages
 

Explanatory Statement
 
F2006L01786ES : PDF Document : 22KB Primary Document Icon F2006L01786ES : ZIP Document : 12KB
5 pages
 

Incorporated Documents
SAE J850 “Barrier Collision Tests”, February 1963 : s21.3.2.2

SAE J839b - “Passenger Car Side Door Latch Systems”, May 1965 : s21.3.2.1

SAE J977 - “Instrumentation for Laboratory Impact Test”, November 1966 : s21.2.3.1

SAE J921 - “Instrument Panel Laboratory Impact Test Procedure”, June 1965 : s21.2.3.1

Australian Design Rule – Definitions and Vehicle Categories : s21.1