Federal Register of Legislation - Australian Government

Primary content

ADR 22/00 Amdt 1 Standards/Australian Design Rules for Vehicles as made
An amendment to Australian Design Rule 22/00 referring to the use of Australian Design Rule 3/03 for new vehicles.
Administered by: DOTARS
Exempt from sunsetting by the Legislative Instruments Act 2003 s 54(2) item 24
Registered 11 May 2006
Tabling HistoryDate
Tabled HR22-May-2006
Tabled Senate13-Jun-2006
Date of repeal 19 Mar 2014
Repealed by Infrastructure and Regional Development (Spent and Redundant Instruments) Repeal Regulation 2014

 

 

 

 

Vehicle Standard (Australian Design Rule 22/00 – Head Restraints) 2006 Amendment 1

I, JAMES ERIC LLOYD, Minister for Local Government, Territories and Roads, determine this vehicle standard under subsection 7 (1) of the Motor Vehicle Standards Act 1989.

 

 

 

 

Dated               26 April 2006

 

 

 

 

 

 

 

 

 

 

 

[SIGNED]

 

 

 

 

 

James Eric Lloyd

 

Minister for Local Government, Territories and Roads


 

CONTENTS

 

1.           legislative provisions............................................................................ 3

2.           amendment of vehicle standard...................................................... 3

3.           amendments................................................................................................. 3

 


1.                                          legislative provisions

1.1.                                    Name of Legislative Instrument

1.1.1.                              This instrument is the Vehicle Standard (Australian Design Rule 22/00 – Head Restraints) 2006 Amendment 1.

1.1.2.                              This instrument may also be cited as Australian Design Rule 22/00 — Head Restraints Amendment 1.

1.2.                                    Commencement

1.2.1.                              This instrument commences on the day after it is registered.

2.                                          amendment of vehicle standard

2.1.                                    The changes specified in section 3 amend Vehicle Standard (Australian Design Rule 22/00 – Head Restraints) 2006.

3.                                          amendments

3.1.                                    Clause C2. (former), renumber as clause C3.

3.2.                                    Insert new clause C2. to read:

“C2.                 Vehicles certified to Australian Design Rule (ADR) 3/03 or a later version need not comply with this rule.”