Federal Register of Legislation - Australian Government

Primary content

ADR 22/00 Standards/Australian Design Rules for Vehicles as made
A vehicle standard determined under section 7(1) of the Motor Vehicle Standards Act 1989 providing requirements for head restraints in road vehicles.
Administered by: Infrastructure, Transport, Regional Development and Communications
General Comments: This standard was originally made under section 7 of the Motor Vehicle Standards Act 1989 and from 1 July 2021 continues in force as if it were a national road vehicle standard determined under section 12 of the Road Vehicle Standards Act 2018 (see Schedule 3, Part 2, item 2 of the Road Vehicle Standards (Consequential and Transitional Provisions) Act 2018).

This standard repeals each vehicle standard with the name Australian Design Rule 22/00 — Head Restraints that is: (a) made under section 7 of the Motor Vehicle Standards Act 1989; and (b) in force at the commencement of this standard. This standard also repeals each instrument made under section 7 of the Motor Vehicle Standards Act 1989 that creates a vehicle standard with the name Australian Design Rule 22/00 — Head Restraints, if there are no other vehicle standards created by that instrument, or amendments to vehicle standards made by that instrument, that are still in force at the commencement of this standard. The Motor Vehicle Standards Act 1989 is wrongly cited in this instrument as the "Motor Vehicles Standard Act 1989".
Exempt from sunsetting by the Legislation (Exemptions and Other Matters) Regulation 2015 s12 item 56C
Registered 11 May 2006
Tabling HistoryDate
Tabled HR22-May-2006
Tabled Senate13-Jun-2006

Use the form below to order print copies of the selected document. Orders are normally dispatched within 3 business days of payment. For more important information about production standards see print copies. For information about the rules for printing copyright material or selling items with the Commonwealth coat of arms without permission, see copyright.

Select All
Legislative Instrument
Vehicle Standard (Australian Design Rule 22/00 – Head Restraints) 2006
6 pages
Select All
Explanatory Statement
Vehicle Standard (Australian Design Rule 22/00 – Head Restraints) 2006 - Explanatory Statement
5 pages
Quantity and Options

The standard production is either A4 or B5 size, conforming with the original document specifications, with a cardboard cover and stapled or perfect bound depending on the number of pages in the document. The covers are produced in black and white and, if 144 pages or more, will have the title on the spine.

There are number of options available at an additional cost that can be selected when placing an order. The drilling option provides either the standard 4 hole pattern on A4 size copies or the Commonwealth legal 4 hole pattern on B5 size copies. Other options are wire or comb binding, a celloglaze or vellum cover, or with colour pages printed in colour. Delivery can be by normal or express post or you can collect your order at the LitSupport Offices in Victoria, New South Wales, Western Australia or Queensland. There are also options available to request special cover artwork or courier delivery. Some options will require you to contact LitSupport (TIMG) first to discuss your requirements and request a quote.

You must select at least one item before continuing.

The Print On Demand service is managed by a commercial provider, LitSupport (TIMG). The Add to Cart button will take you to the shopping cart function provided by LitSupport (TIMG) where you can check out as a guest or set up an account with them to manage your orders. This account will be separate from the MyAccount service provided on the Federal Register of Legislation.

If you require further assistance with ordering please email or ring LitSupport (TIMG) on 07 3223 9225 between 8.30am and 9.00pm AEST on weekdays.

You are ordering an item that is NOT In Force or NOT Latest Version, continue to Add Item to Cart? false