Federal Register of Legislation - Australian Government

Primary content

ADR 2/01 Standards/Australian Design Rules for Vehicles as made
A vehicle standard determined under section 7(1) of the Motor Vehicle Standards Act 1989 providing requirements for side door latches and hinges.
Administered by: Infrastructure, Transport, Regional Development and Communications
General Comments: This standard was originally made under section 7 of the Motor Vehicle Standards Act 1989 and from 1 July 2021 continues in force as if it were a national road vehicle standard determined under section 12 of the Road Vehicle Standards Act 2018 (see Schedule 3, Part 2, item 2 of the Road Vehicle Standards (Consequential and Transitional Provisions) Act 2018).
Exempt from sunsetting by the Legislation (Exemptions and Other Matters) Regulation 2015 s12 item 56C
Registered 12 May 2006
Tabling HistoryDate
Tabled HR22-May-2006
Tabled Senate13-Jun-2006
Help with file formats Help with file formats
Legislative Instrument
F2006L01362 : Authoritative PDF Document : 0.4MB Primary Document Icon F2006L01362 : ZIP Document : 0.2MB
26 pages

Explanatory Statement
F2006L01362ES : PDF Document : 16KB Primary Document Icon F2006L01362ES : ZIP Document : 13KB
4 pages

Supporting Material
F2006L01362SMN01 : PDF Document : 0.2MB Primary Document Icon F2006L01362SMN01 : ZIP Document : 0.1MB
61 pages

Incorporated Documents
Global Technical Regulation 1 - Door Locks and Door Retention Components: s7.2

Vehicle Standard (Australian Design Rule - Definitions and Vehicle Categories) 2005: s4.2

UNECE R11 Uniform Provisions Concerning the Approval of Vehicles with Regards to Door Latches and Door Retention Components: s7.1