Airworthiness Directives 2004
I, DAVID ALAN VILLIERS, delegate of the Civil Aviation Safety
Authority, acting under subregulation 39.001 (1) of the Civil
Aviation Safety Regulations 1998:
(a) revoke the Airworthiness Directives mentioned in
Schedule 1; and
(b) make, as separate instruments, each Airworthiness
Directive mentioned in Schedule 1 and attached.

David Villiers
Delegate of the Civil Aviation Safety Authority
20 December 2004
Note: Each attached Airworthiness Directive is being re-made in exactly the
same form as appears in the latest published edition of the Directive.
Schedule 1 Revocation and Remaking of
Airworthiness Directives
Aerospatiale Rallye Series Aeroplanes
AD Name AD Number
Stop Washer, Aileron Front Pivot - Installation AD/MSR/1
Tab Control Pinion on Shaft - Modification AD/MSR/2
Spot Welding of Skin to Rear Fuselage Frame - Inspection AD/MSR/3
L/H Fuel Supply Hose - Replacement Fuel Gauge Vent - Modification AD/MSR/4
Horizontal Stabiliser Front Attachment Brackets - Inspection and Modification AD/MSR/5 Amdt 1
Leading Edge Slats - CANCELLED AD/MSR/6
Fuel Pressure Gauge Line - CANCELLED AD/MSR/7
Engine Cooling - Modification AD/MSR/8
Fuel System - Fuel Gauge Ball - Replacement AD/MSR/9
Firewall Sealing - Modification AD/MSR/10
Flexible Hoses in Engine Compartment - Installation AD/MSR/11 Amdt 1
Elevator Control Rod - Inspection AD/MSR/12
Carburettor Heat Butterfly - CANCELLED AD/MSR/13
Carburettor Heat Butterfly - CANCELLED AD/MSR/14
Elevator Bell Crank - Replacement AD/MSR/15 Amdt 1
Firewall Engine Mount Attachment Fittings - Inspection AD/MSR/16
Central Front Horizontal Stabiliser Attachment Bracket - Inspection and AD/MSR/17
Engine Mount AD/MSR/18 Amdt 2
Front Seat Restraint Installation - Modification AD/MSR/19
Engine Cowling Attachment Locks - Modification AD/MSR/20
Front Seat Support Beam Protection - Installation AD/MSR/21
Rear Fuselage Structure - Inspection AD/MSR/22
Wing Attachment Fittings - Inspection AD/MSR/23
Wing Flap System - Inspection AD/MSR/24
Carburettor Heat Valve - Modification AD/MSR/25
Wing Structural Fatigue Life Limitation AD/MSR/26
Corrosion - Inspection AD/MSR/27 Amdt 1
Horizontal Stabilizer Spar and Attachment Fittings AD/MSR/28 Amdt 1
Engine Mount AD/MSR/29
Nose Landing Gear Attachment Fitting AD/MSR/30 Amdt 1
Nose Landing Gear - Yoke Pivot Assembly AD/MSR/31
Nose Landing Gear - Wheel Axle AD/MSR/32