Federal Register of Legislation - Australian Government

Primary content

SLI 2005 No. 10 Regulations as made
These Regulations prescribe the information that must be set out on the identity cards carried by compliance monitoring officers appointed under the Textile, Clothing and Footwear Strategic Investment Program Act 1999.
Administered by: Industry and Science
Registered 14 Feb 2005
Tabling HistoryDate
Tabled HR15-Feb-2005
Tabled Senate07-Mar-2005
Date of repeal 01 Apr 2015
Repealed by Sunsetting

I, PHILIP MICHAEL JEFFERY, Governor-General of the Commonwealth of Australia, acting with the advice of the Federal Executive Council, make the following Regulations under the Textile, Clothing and Footwear Strategic Investment Program Act 1999.

Dated 10 February 2005

P. M. JEFFERY

Governor-General

By His Excellency’s Command

NICK MINCHIN

Minister for Finance and Administration

for the Minister for Industry, Tourism and Resources


  

  

1              Name of Regulations

                These Regulations are the Textile, Clothing and Footwear Strategic Investment Program Regulations 2005.

2              Commencement

                These Regulations commence on the day after they are registered.

3              Interpretation

                In these Regulations:

Act means the Textile, Clothing and Footwear Strategic Investment Program Act 1999.

APS employee has the same meaning as in section 7 of the Public Service Act 1999.

4              Identity cards

         (1)   For paragraph 18F (2) (a) of the Act, an identity card must be in a form that sets out the following information:

                (a)    the authorised officer’s name;

               (b)    if the authorised officer is an APS employee — the name of the Department of State of the Commonwealth to which the officer belongs;

                (c)    if the authorised officer is not an APS employee — the functions for which the authorised officer was appointed;

               (d)    a declaration that the card has been issued by the Secretary under the Act;

                (e)    the identification number of the identity card;

                (f)    instructions for the return of the identity card, if found.

         (2)   For paragraph 37U (2) (a) of the Act, the identity card must be in a form that sets out the following information:

                (a)    the authorised officer’s name;

               (b)    if the authorised officer is an APS employee — the name of the Department of State of the Commonwealth to which the officer belongs;

                (c)    if the authorised officer is not an APS employee — the functions for which the authorised officer was appointed;

               (d)    a declaration that the card has been issued by the Secretary under the Act;

                (e)    the identification number of the identity card;

                (f)    instructions for the return of the identity card, if found.

Note

1.       All legislative instruments and compilations are registered on the Federal Register of Legislative Instruments kept under the Legislative Instruments Act 2003. See www.frli.gov.au.