Federal Register of Legislation - Australian Government

Primary content

Customs Tariff Act 1995

Authoritative Version
  • - C2020C00069
  • In force - Superseded Version
  • View Series
Act No. 147 of 1995 as amended, taking into account amendments up to Customs Tariff Amendment (Growing Australian Export Opportunities Across the Asia-Pacific) Act 2019
An Act to impose duties of Customs, to repeal the Customs Tariff Act 1987, and for related purposes
Administered by: Home Affairs
Registered 07 Feb 2020
Start Date 17 Jan 2020
End Date 10 Feb 2020
Table of contents.

Commonwealth Coat of Arms of Australia

Customs Tariff Act 1995

No. 147, 1995

Compilation No. 77

Compilation date:                              17 January 2020

Includes amendments up to:            Act No. 109, 2019

Registered:                                         7 February 2020

This compilation is in 7 volumes

Volume 1:       sections 1–22

                        Schedule 2

Volume 2:       Schedule 3 (Chapters 1–38)

Volume 3:       Schedule 3 (Chapters 39–59)

Volume 4:       Schedule 3 (Chapters 60–73)

Volume 5:       Schedule 3 (Chapters 74–97)

Volume 6:       Schedules 4–13

Volume 7:       Endnotes

Each volume has its own contents

 

About this compilation

This compilation

This is a compilation of the Customs Tariff Act 1995 that shows the text of the law as amended and in force on 17 January 2020 (the compilation date).

The notes at the end of this compilation (the endnotes) include information about amending laws and the amendment history of provisions of the compiled law.

Uncommenced amendments

The effect of uncommenced amendments is not shown in the text of the compiled law. Any uncommenced amendments affecting the law are accessible on the Legislation Register (www.legislation.gov.au). The details of amendments made up to, but not commenced at, the compilation date are underlined in the endnotes. For more information on any uncommenced amendments, see the series page on the Legislation Register for the compiled law.

Application, saving and transitional provisions for provisions and amendments

If the operation of a provision or amendment of the compiled law is affected by an application, saving or transitional provision that is not included in this compilation, details are included in the endnotes.

Editorial changes

For more information about any editorial changes made in this compilation, see the endnotes.

Modifications

If the compiled law is modified by another law, the compiled law operates as modified but the modification does not amend the text of the law. Accordingly, this compilation does not show the text of the compiled law as modified. For more information on any modifications, see the series page on the Legislation Register for the compiled law.

Self‑repealing provisions

If a provision of the compiled law has been repealed in accordance with a provision of the law, details are included in the endnotes.

  

  

  


Contents

Schedule 3—Classification of goods and general and special rates of duty        1

Section XV—Base metals and articles of base metal                                        1

Chapter 74—Copper and articles thereof                                                         1

Note....................... ............................................................................................ 1

Subheading Note... ............................................................................................ 4

Chapter 75—Nickel and articles thereof                                                         11

Note....................... .......................................................................................... 11

Subheading Notes. .......................................................................................... 13

Chapter 76—Aluminium and articles thereof                                               16

Note....................... .......................................................................................... 16

Subheading Notes. .......................................................................................... 18

Chapter 78—Lead and articles thereof                                                            24

Note....................... .......................................................................................... 24

Subheading Note... .......................................................................................... 26

Chapter 79—Zinc and articles thereof                                                             28

Note....................... .......................................................................................... 28

Subheading Note... .......................................................................................... 30

Chapter 80—Tin and articles thereof                                                                32

Note....................... .......................................................................................... 32

Subheading Note... .......................................................................................... 34

Chapter 81—Other base metals; cermets; articles thereof                   35

Subheading Note... .......................................................................................... 35

Chapter 82—Tools, implements, cutlery, spoons and forks, of base metal; parts thereof of base metal                                                                                                                      39

Notes..................... .......................................................................................... 39

Chapter 83—Miscellaneous articles of base metal                                     46

Notes..................... .......................................................................................... 46

Section XVI—Machinery and mechanical appliances; electrical equipment; parts thereof; sound recorders and reproducers, television image and sound recorders and reproducers, and parts and accessories of such articles                                                                 50

Notes..................... .......................................................................................... 50

Additional Notes... .......................................................................................... 52

Chapter 84—Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof               54

Notes..................... .......................................................................................... 54

Subheading Notes. .......................................................................................... 58

Additional Notes... .......................................................................................... 59

Chapter 85—Electrical machinery and equipment and parts thereof; sound recorders and reproducers, television image and sound recorders and reproducers, and parts and accessories of such articles                                                                                                    125

Notes..................... ........................................................................................ 125

Subheading Note... ........................................................................................ 130

Additional Notes... ........................................................................................ 130

Section XVII—Vehicles, aircraft, vessels and associated transport equipment   167

Notes..................... ........................................................................................ 167

Chapter 86—Railway or tramway locomotives, rolling‑stock and parts thereof; railway or tramway track fixtures and fittings and parts thereof; mechanical (including electro‑mechanical) traffic signalling equipment of all kinds                                169

Notes..................... ........................................................................................ 169

Chapter 87—Vehicles other than railway or tramway rolling‑stock, and parts and accessories thereof                                                                                                                    173

Notes..................... ........................................................................................ 173

Additional Notes... ........................................................................................ 173

Chapter 88—Aircraft, spacecraft, and parts thereof                             195

Subheading Note... ........................................................................................ 195

Chapter 89—Ships, boats and floating structures                                    197

Note....................... ........................................................................................ 197

Section XVIII—Optical, photographic, cinematographic, measuring, checking, precision, medical or surgical instruments and apparatus; clocks and watches; musical instruments; parts and accessories thereof                                                                                          200

Chapter 90—Optical, photographic, cinematographic, measuring, checking, precision, medical or surgical instruments and apparatus; parts and accessories thereof             200

Notes..................... ........................................................................................ 200

Additional Notes... ........................................................................................ 203

Chapter 91—Clocks and watches and parts thereof                               220

Notes..................... ........................................................................................ 220

Chapter 92—Musical instruments; parts and accessories of such articles          225

Notes..................... ........................................................................................ 225

Section XIX—Arms and ammunition; parts and accessories thereof 228

Chapter 93—Arms and ammunition; parts and accessories thereof 228

Notes..................... ........................................................................................ 228

Section XX—Miscellaneous manufactured articles                                      231

Chapter 94—Furniture; bedding, mattresses, mattress supports, cushions and similar stuffed furnishings; lamps and lighting fittings, not elsewhere specified or included; illuminated signs, illuminated name‑plates and the like; prefabricated buildings          231

Notes..................... ........................................................................................ 231

Chapter 95—Toys, games and sports requisites; parts and accessories thereof              236

Notes..................... ........................................................................................ 236

Subheading Note... ........................................................................................ 238

Chapter 96—Miscellaneous manufactured articles                                 242

Notes..................... ........................................................................................ 242

Section XXI—Works of art, collectors’ pieces and antiques                   250

Chapter 97—Works of art, collectors’ pieces and antiques                250

Notes..................... ........................................................................................ 250

Additional Notes... ........................................................................................ 251


Schedule 3Classification of goods and general and special rates of duty

Section XVBase metals and articles of base metal

Chapter 74Copper and articles thereof

Note. 

             1.‑  In this Chapter the following have the meanings hereby assigned to them:

                     (a)  Refined copper

                            Metal containing at least 99.85% by weight of copper; or

                            Metal containing at least 97.5% by weight of copper, provided that the content by weight of any other element does not exceed the limit specified in the following table:

 

Table—Other elements

Element

Limiting content % by weight

Ag           Silver

0.25

As           Arsenic

0.5

Cd           Cadmium

1.3

Cr            Chromium

1.4

Mg          Magnesium

0.8

Pb           Lead

1.5

S              Sulphur

0.7

Sn           Tin

0.8

Te           Tellurium

0.8

Zn           Zinc

1

Zr            Zirconium

0.3

Other elements(1), each

0.3

(1)   Other elements are, for example, Al, Be, Co, Fe, Mn, Ni, Si.

                     (b)  Copper alloys

                            Metallic substances other than unrefined copper in which copper predominates by weight over each of the other elements, provided that:

                              (i)  the content by weight of at least one of the other elements is greater than the limit specified in the foregoing table; or

                             (ii)  the total content by weight of such other elements exceeds 2.5%.

                     (c)  Master alloys

                            Alloys containing with other elements more than 10% by weight of copper, not usefully malleable and commonly used as an additive in the manufacture of other alloys or as de‑oxidants, de‑sulphurising agents or for similar uses in the metallurgy of non‑ferrous metals. However, copper phosphide (phosphor copper) containing more than 15% by weight of phosphorus falls in 2853.

                     (d)  Bars and rods

                            Rolled, extruded, drawn or forged products, not in coils, which have a uniform solid cross‑section along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons (including “flattened circles” and “modified rectangles”, of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). Products, with a rectangular (including square), triangular or polygonal cross‑section may have corners rounded along their whole length. The thickness of such products which have a rectangular (including “modified rectangular”) cross‑section exceeds one‑tenth of the width. “Bars and rods” also covers cast or sintered products, of the same forms and dimensions, which have been subsequently worked after production (otherwise than by simple trimming or de‑scaling), provided that they have not thereby assumed the character of articles or products of other headings.

                            Wire‑bars and billets with their ends tapered or otherwise worked simply to facilitate their entry into machines for converting them into, for example, drawing stock (wire‑rod) or tubes, are however to be taken to be unwrought copper of 7403.

                     (e)  Profiles

                            Rolled, extruded, drawn, forged or formed products, coiled or not, of a uniform cross‑section along their whole length, which do not conform to any of the definitions of bars, rods, wire, plates, sheets, strip, foil, tubes or pipes. “Profiles” also covers cast or sintered products, of the same forms, which have been subsequently worked after production (otherwise than by simple trimming or de‑scaling), provided that they have not thereby assumed the character of articles or products of other headings.

                      (f)  Wire

                            Rolled, extruded or drawn products, in coils, which have a uniform solid cross‑section along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons (including “flattened circles” and “modified rectangles”, of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). Products with a rectangular (including square), triangular or polygonal cross‑section may have corners rounded along their whole length. The thickness of such products which have a rectangular (including “modified rectangular”) cross‑section exceeds one‑tenth of the width.

                           

                     (g)  Plates, sheets, strip and foil

                            Flat‑surfaced products (other than the unwrought products of 7403), coiled or not, of solid rectangular (other than square) cross‑section with or without rounded corners (including “modified rectangles” of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel) of a uniform thickness, which are:

  ‑ of rectangular (including square) shape with a thickness not exceeding one‑tenth of the width,

  ‑ of a shape other than rectangular or square, of any size, provided that they do not assume the character of articles or products of other headings.

                            7409 and 7410 apply, inter alia, to plates, sheets, strip and foil with patterns (for example, grooves, ribs, chequers, tears, buttons, lozenges) and to such products which have been perforated, corrugated, polished or coated, provided that they do not thereby assume the character of articles or products of other headings.

                     (h)  Tubes and pipes

                            Hollow products, coiled or not, which have a uniform cross‑section with only one enclosed void along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons, and which have a uniform wall thickness. Products with a rectangular (including square), equilateral triangular or regular convex polygonal cross‑section, which may have corners rounded along their whole length, are also to be taken to be tubes and pipes provided the inner and outer cross‑sections are concentric and have the same form and orientation. Tubes and pipes of the foregoing cross‑sections may be polished, coated, bent, threaded, drilled, waisted, expanded, cone‑shaped or fitted with flanges, collars or rings.

Subheading Note. 

             1.‑  In this Chapter the following have the meanings hereby assigned to them:

                     (a)  Copper‑zinc base alloys (brasses)

                            Alloys of copper and zinc, with or without other elements. When other elements are present:

  ‑ zinc predominates by weight over each of such other elements;

  ‑ any nickel content by weight is less than 5% (see copper‑nickel‑zinc alloys (nickel silvers)); and

  ‑ any tin content by weight is less than 3% (see copper‑tin alloys (bronzes)).

                     (b)  Copper‑tin base alloys (bronzes)

                            Alloys of copper and tin, with or without other elements. When other elements are present, tin predominates by weight over each of such other elements, except that when the tin content is 3% or more the zinc content by weight may exceed that of tin but must be less than 10%.

                     (c)  Copper‑nickel‑zinc base alloys (nickel silvers)

                            Alloys of copper, nickel and zinc, with or without other elements. The nickel content is 5% or more by weight (see copper‑zinc alloys (brasses)).

                     (d)  Copper‑nickel base alloys

                            Alloys of copper and nickel, with or without other elements but in any case containing by weight not more than 1% of zinc. When other elements are present, nickel predominates by weight over each of such other elements.

 

7401.00.00

COPPER MATTES; CEMENT COPPER (PRECIPITATED COPPER)

Free

 

7402.00.00

UNREFINED COPPER; COPPER ANODES FOR ELECTROLYTIC REFINING

Free

 

7403

REFINED COPPER AND COPPER ALLOYS, UNWROUGHT:

 

7403.1

‑Refined copper:

 

7403.11.00

‑‑Cathodes and sections of cathodes

Free

7403.12.00

‑‑Wire‑bars

Free

7403.13.00

‑‑Billets

Free

7403.19.00

‑‑Other

Free

7403.2

‑Copper alloys:

 

7403.21.00

‑‑Copper‑zinc base alloys (brass)

Free

7403.22.00

‑‑Copper‑tin base alloys (bronze)

Free

7403.29.00

‑‑Other copper alloys (other than master alloys of 7405.00.00)

Free

 

7404.00.00

COPPER WASTE AND SCRAP

Free

 

7405.00.00

MASTER ALLOYS OF COPPER

Free

 

7406

COPPER POWDERS AND FLAKES:

 

7406.10.00

‑Powders of non‑lamellar structure

Free

7406.20.00

‑Powders of lamellar structure; flakes

Free

 

7407

COPPER BARS, RODS AND PROFILES:

 

7407.10.00

‑Of refined copper

5%
DCS:4%
DCT:5%

7407.2

‑Of copper alloys:

 

7407.21.00

‑‑Of copper‑zinc base alloys (brass)

5%
DCS:4%
DCT:5%

7407.29.00

‑‑Other

5%
DCS:4%
DCT:5%

 

7408

COPPER WIRE:

 

7408.1

‑Of refined copper:

 

7408.11.00

‑‑Of which the maximum cross‑sectional dimension exceeds 6 mm

5%
DCS:4%
DCT:5%

7408.19.00

‑‑Other

5%
DCS:4%
DCT:5%

7408.2

‑Of copper alloys:

 

7408.21.00

‑‑Of copper‑zinc base alloys (brass)

5%
DCS:4%
DCT:5%

7408.22.00

‑‑Of copper‑nickel base alloys (cupro‑nickel) or copper‑nickel‑zinc base alloys (nickel silver)

5%
DCS:4%
DCT:5%

7408.29.00

‑‑Other

5%
DCS:4%
DCT:5%

 

7409

COPPER PLATES, SHEETS AND STRIP, OF A THICKNESS EXCEEDING 0.15 mm:

 

7409.1

‑Of refined copper:

 

7409.11.00

‑‑In coils

5%
DCS:4%
DCT:5%

7409.19.00

‑‑Other

5%
DCS:4%
DCT:5%

7409.2

‑Of copper‑zinc base alloys (brass):

 

7409.21.00

‑‑In coils

5%
DCS:4%
DCT:5%

7409.29.00

‑‑Other

5%
DCS:4%
DCT:5%

7409.3

‑Of copper‑tin base alloys (bronze):

 

7409.31.00

‑‑In coils

5%
DCS:4%
DCT:5%

7409.39.00

‑‑Other

5%
DCS:4%
DCT:5%

7409.40.00

‑Of copper‑nickel base alloys (cupro‑nickel) or copper‑nickel‑zinc base alloys (nickel silver)

5%
DCS:4%
DCT:5%

7409.90.00

‑Of other copper alloys

5%
DCS:4%
DCT:5%

 

7410

COPPER FOIL (WHETHER OR NOT PRINTED OR BACKED WITH PAPER, PAPERBOARD, PLASTICS OR SIMILAR BACKING MATERIALS), OF A THICKNESS (EXCLUDING ANY BACKING) NOT EXCEEDING 0.15 mm:

 

7410.1

‑Not backed:

 

7410.11.00

‑‑Of refined copper

5%
DCS:4%
DCT:5%

7410.12.00

‑‑Of copper alloys

5%
DCS:4%
DCT:5%

7410.2

‑Backed:

 

7410.21.00

‑‑Of refined copper

5%
DCS:4%
DCT:5%

7410.22.00

‑‑Of copper alloys

5%
DCS:4%
DCT:5%

 

7411

COPPER TUBES AND PIPES:

 

7411.10.00

‑Of refined copper

5%
DCS:4%
DCT:5%

7411.2

‑Of copper alloys:

 

7411.21.00

‑‑Of copper‑zinc base alloys (brass)

5%
DCS:4%
DCT:5%

7411.22.00

‑‑Of copper‑nickel base alloys (cupro‑nickel) or copper‑nickel‑zinc base alloys (nickel silver)

5%
DCS:4%
DCT:5%

7411.29.00

‑‑Other

5%
DCS:4%
DCT:5%

 

7412

COPPER TUBE OR PIPE FITTINGS (FOR EXAMPLE, COUPLINGS, ELBOWS, SLEEVES):

 

7412.10.00

‑Of refined copper

5%

7412.20.00

‑Of copper alloys

5%

 

7413.00.00

STRANDED WIRE, CABLES, PLAITED BANDS AND THE LIKE, OF COPPER, NOT ELECTRICALLY INSULATED

5%
DCS:4%
DCT:5%

 

7415

NAILS, TACKS, DRAWING PINS, STAPLES (OTHER THAN THOSE OF 8305) AND SIMILAR ARTICLES, OF COPPER OR OF IRON OR STEEL WITH HEADS OF COPPER; SCREWS, BOLTS, NUTS, SCREW HOOKS, RIVETS, COTTERS, COTTER‑PINS, WASHERS (INCLUDING SPRING WASHERS) AND SIMILAR ARTICLES, OF COPPER:

 

7415.10.00

‑Nails and tacks, drawing pins, staples and similar articles

5%

7415.2

‑Other articles, not threaded:

 

7415.21.00

‑‑Washers (including spring washers)

5%

7415.29.00

‑‑Other

5%

7415.3

‑Other threaded articles:

 

7415.33.00

‑‑Screws; bolts and nuts

5%

7415.39.00

‑‑Other

5%

 

7418

TABLE, KITCHEN OR OTHER HOUSEHOLD ARTICLES AND PARTS THEREOF, OF COPPER; POT SCOURERS AND SCOURING OR POLISHING PADS, GLOVES AND THE LIKE, OF COPPER; SANITARY WARE AND PARTS THEREOF, OF COPPER:

 

7418.10.00

‑Table, kitchen or other household articles and parts thereof; pot scourers and scouring or polishing pads, gloves and the like

5%

7418.20.00

‑Sanitary ware and parts thereof

5%

 

7419

OTHER ARTICLES OF COPPER:

 

7419.10.00

‑Chain and parts thereof

Free

7419.9

‑Other:

 

7419.91.00

‑‑Cast, moulded, stamped or forged, but not further worked

5%

7419.99.00

‑‑Other

5%

Chapter 75Nickel and articles thereof

Note. 

             1.‑  In this Chapter the following have the meanings hereby assigned to them:

                     (a)  Bars and rods

                            Rolled, extruded, drawn or forged products, not in coils, which have a uniform solid cross‑section along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons (including “flattened circles” and “modified rectangles”, of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). Products with a rectangular (including square), triangular or polygonal cross‑section may have corners rounded along their whole length. The thickness of such products which have a rectangular (including “modified rectangular”) cross‑section exceeds one‑tenth of the width. “Bars and rods” also covers cast or sintered products, of the same forms and dimensions, which have been subsequently worked after production (otherwise than by simple trimming or de‑scaling), provided that they have not thereby assumed the character of articles or products of other headings.

                     (b)  Profiles

                            Rolled, extruded, drawn, forged or formed products, coiled or not, of a uniform cross‑section along their whole length, which do not conform to any of the definitions of bars, rods, wire, plates, sheets, strip, foil, tubes or pipes. “Profiles” also covers cast or sintered products, of the same forms, which have been subsequently worked after production (otherwise than by simple trimming or de‑scaling), provided that they have not thereby assumed the character of articles or products of other headings.

                     (c)  Wire

                            Rolled, extruded or drawn products, in coils, which have a uniform solid cross‑section along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons (including “flattened circles” and “modified rectangles”, of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). Products with a rectangular (including square), triangular or polygonal cross‑section may have corners rounded along their whole length. The thickness of such products which have a rectangular (including “modified rectangular”) cross‑section exceeds one‑tenth of the width.

                     (d)  Plates, sheets, strip and foil

                            Flat‑surfaced products (other than the unwrought products of 7502), coiled or not, of solid rectangular (other than square) cross‑section with or without rounded corners (including “modified rectangles” of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel) of a uniform thickness, which are:

  ‑ of rectangular (including square) shape with a thickness not exceeding one‑tenth of the width,

  ‑ of a shape other than rectangular or square, of any size, provided that they do not assume the character of articles or products of other headings.

                            7506 applies, inter alia, to plates, sheets, strip and foil with patterns (for example, grooves, ribs, chequers, tears, buttons, lozenges) and to such products which have been perforated, corrugated, polished or coated, provided that they do not thereby assume the character of articles or products of other headings.

                     (e)  Tubes and pipes

                            Hollow products, coiled or not, which have a uniform cross‑section with only one enclosed void along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons, and which have a uniform wall thickness. Products with a rectangular (including square), equilateral triangular, or regular convex polygonal cross‑section, which may have corners rounded along their whole length, are also to be considered as tubes and pipes provided the inner and outer cross‑sections are concentric and have the same form and orientation. Tubes and pipes of the foregoing cross‑sections may be polished, coated, bent, threaded, drilled, waisted, expanded, cone‑shaped or fitted with flanges, collars or rings.

Subheading Notes. 

             1.‑  In this Chapter the following have the meanings hereby assigned to them:

                     (a)  Nickel, not alloyed

                            Metal containing by weight at least 99% of nickel plus cobalt, provided that:

                              (i)  the cobalt content by weight does not exceed 1.5%, and

                             (ii)  the content by weight of any other element does not exceed the limit specified in the following table:

 

Table—Other elements

Element

Limiting content % by weight

Fe            Iron

0.5

O             Oxygen

0.4

Other elements, each

0.3

                     (b)  Nickel alloys

                            Metallic substances in which nickel predominates by weight over each of the other elements provided that:

                              (i)  the content by weight of cobalt exceeds 1.5%,

                             (ii)  the content by weight of at least one of the other elements is greater than the limit specified in the foregoing table, or

                            (iii)  the total content by weight of elements other than nickel plus cobalt exceeds 1%.

             2.‑  Notwithstanding the provisions of Chapter Note 1(c), for the purposes of 7508.10.00 “wire” applies only to products, whether or not in coils, of any cross‑sectional shape, of which no cross‑sectional dimension exceeds 6 mm.

 

7501

NICKEL MATTES, NICKEL OXIDE SINTERS AND OTHER INTERMEDIATE PRODUCTS OF NICKEL METALLURGY:

 

7501.10.00

‑Nickel mattes

Free

7501.20.00

‑Nickel oxide sinters and other intermediate products of nickel metallurgy

Free

 

7502

UNWROUGHT NICKEL:

 

7502.10.00

‑Nickel, not alloyed

Free

7502.20.00

‑Nickel alloys

Free

 

7503.00.00

NICKEL WASTE AND SCRAP

Free

 

7504.00.00

NICKEL POWDERS AND FLAKES

Free

 

7505

NICKEL BARS, RODS, PROFILES AND WIRE:

 

7505.1

‑Bars, rods and profiles:

 

7505.11.00

‑‑Of nickel, not alloyed

Free

7505.12.00

‑‑Of nickel alloys

Free

7505.2

‑Wire:

 

7505.21.00

‑‑Of nickel, not alloyed

Free

7505.22.00

‑‑Of nickel alloys

Free

 

7506

NICKEL PLATES, SHEETS, STRIP AND FOIL:

 

7506.10.00

‑Of nickel, not alloyed

Free

7506.20.00

‑Of nickel alloys

Free

 

7507

NICKEL TUBES, PIPES AND TUBE OR PIPE FITTINGS (FOR EXAMPLE, COUPLINGS, ELBOWS, SLEEVES):

 

7507.1

‑Tubes and pipes:

 

7507.11.00

‑‑Of nickel, not alloyed

Free

7507.12.00

‑‑Of nickel alloys

Free

7507.20.00

‑Tube or pipe fittings

5%

 

7508

OTHER ARTICLES OF NICKEL:

 

7508.10.00

‑Cloth, grill and netting, of nickel wire

Free

7508.90.00

‑Other

Free

Chapter 76Aluminium and articles thereof

Note. 

             1.‑  In this Chapter the following have the meanings hereby assigned to them:

                     (a)  Bars and rods

                            Rolled, extruded, drawn or forged products, not in coils, which have a uniform solid cross‑section along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons (including “flattened circles” and “modified rectangles”, of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). Products with a rectangular (including square), triangular or polygonal cross‑section may have corners rounded along their whole length. The thickness of such products which have a rectangular (including “modified rectangular”) cross‑section exceeds one‑tenth of the width. “Bars and rods” also covers cast or sintered products, of the same forms and dimensions, which have been subsequently worked after production (otherwise than by simple trimming or de‑scaling), provided that they have not thereby assumed the character of articles or products of other headings.

                     (b)  Profiles

                            Rolled, extruded, drawn, forged or formed products, coiled or not, of a uniform cross‑section along their whole length, which do not conform to any of the definitions of bars, rods, wire, plates, sheets, strip, foil, tubes or pipes. “Profiles” also covers cast or sintered products, of the same forms, which have been subsequently worked after production (otherwise than by simple trimming or de‑scaling), provided that they have not thereby assumed the character of articles or products of other headings.

                     (c)  Wire

                            Rolled, extruded or drawn products, in coils, which have a uniform solid cross‑section along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons (including “flattened circles” and “modified rectangles”, of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). Products with a rectangular (including square), triangular or polygonal cross‑section may have corners rounded along their whole length. The thickness of such products which have a rectangular (including “modified rectangular”) cross‑section exceeds one‑tenth of the width.

                     (d)  Plates, sheets, strip and foil

                            Flat‑surfaced products (other than the unwrought products of 7601), coiled or not, of solid rectangular (other than square) cross‑section with or without rounded corners (including “modified rectangles” of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel) of a uniform thickness, which are:

  ‑ of rectangular (including square) shape with a thickness not exceeding one‑tenth of the width,

  ‑ of a shape other than rectangular or square, of any size, provided that they do not assume the character of articles or products of other headings.

                            7606 and 7607 apply, inter alia, to plates, sheets, strip and foil with patterns (for example, grooves, ribs, chequers, tears, buttons, lozenges) and to such products which have been perforated, corrugated, polished or coated, provided that they do not thereby assume the character of articles or products of other headings.

                     (e)  Tubes and pipes

                            Hollow products, coiled or not, which have a uniform cross‑section with only one enclosed void along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons, and which have a uniform wall thickness. Products with a rectangular (including square), equilateral triangular or regular convex polygonal cross‑section, which may have corners rounded along their whole length, are also to be considered as tubes and pipes provided the inner and outer cross‑sections are concentric and have the same form and orientation. Tubes and pipes of the foregoing cross‑sections may be polished, coated, bent, threaded, drilled, waisted, expanded, cone‑shaped or fitted with flanges, collars or rings.

Subheading Notes. 

             1.‑  In this Chapter the following have the meanings hereby assigned to them:

                     (a)  Aluminium, not alloyed

                            Metal containing by weight at least 99% of aluminium, provided that the content by weight of any other element does not exceed the limit specified in the following table:

 

Table—Other elements

Element

Limiting content % by weight

Fe + Si (iron plus silicon)

1

Other elements (1), each

0.1(2)

(1)   Other elements are, for example, Cr, Cu, Mg, Mn, Ni, Zn.

(2)   Copper is permitted in a proportion greater than 0.1% but not more than 0.2%, provided that neither the chromium nor manganese content exceeds 0.05%.

                     (b)  Aluminium alloys

                            Metallic substances in which aluminium predominates by weight over each of the other elements, provided that:

                              (i)  the content by weight of at least one of the other elements or of iron plus silicon taken together is greater than the limit specified in the foregoing table; or

                             (ii)  the total content by weight of such other elements exceeds 1%.

             2.‑  Notwithstanding the provisions of Chapter Note 1(c), for the purposes of 7616.91.00 “wire” applies only to products, whether or not in coils, of any cross‑sectional shape, of which no cross‑sectional dimension exceeds 6 mm.

 

7601

UNWROUGHT ALUMINIUM:

 

7601.10.00

‑Aluminium, not alloyed

Free

7601.20.00

‑Aluminium alloys

Free

 

7602.00.00

ALUMINIUM WASTE AND SCRAP

Free

 

7603

ALUMINIUM POWDERS AND FLAKES:

 

7603.10.00

‑Powders of non‑lamellar structure

Free

7603.20.00

‑Powders of lamellar structure; flakes

Free

 

7604

ALUMINIUM BARS, RODS AND PROFILES:

 

7604.10.00

‑Of aluminium, not alloyed

5%
DCS:4%
DCT:5%

7604.2

‑Of aluminium alloys:

 

7604.21.00

‑‑Hollow profiles

5%
DCS:4%
DCT:5%

7604.29.00

‑‑Other

5%
DCS:4%
DCT:5%

 

7605

ALUMINIUM WIRE:

 

7605.1

‑Of aluminium, not alloyed:

 

7605.11.00

‑‑Of which the maximum cross‑sectional dimension exceeds 7 mm

5%
DCS:4%
DCT:5%

7605.19.00

‑‑Other

5%
DCS:4%
DCT:5%

7605.2

‑Of aluminium alloys:

 

7605.21.00

‑‑Of which the maximum cross‑sectional dimension exceeds 7 mm

5%
DCS:4%
DCT:5%

7605.29.00

‑‑Other

5%
DCS:4%
DCT:5%

 

7606

ALUMINIUM PLATES, SHEETS AND STRIP, OF A THICKNESS EXCEEDING 0.2 mm:

 

7606.1

‑Rectangular (including square):

 

7606.11.00

‑‑Of aluminium, not alloyed

5%
DCS:4%
DCT:5%

7606.12.00

‑‑Of aluminium alloys

5%
DCS:4%
DCT:5%

7606.9

‑Other:

 

7606.91.00

‑‑Of aluminium, not alloyed

5%
DCS:4%
DCT:5%

7606.92.00

‑‑Of aluminium alloys

5%
DCS:4%
DCT:5%

 

7607

ALUMINIUM FOIL (WHETHER OR NOT PRINTED OR BACKED WITH PAPER, PAPERBOARD, PLASTICS OR SIMILAR BACKING MATERIALS) OF A THICKNESS (EXCLUDING ANY BACKING) NOT EXCEEDING 0.2 mm:

 

7607.1

‑Not backed:

 

7607.11.00

‑‑Rolled but not further worked

5%

7607.19.00

‑‑Other

5%

7607.20.00

‑Backed

5%

 

7608

ALUMINIUM TUBES AND PIPES:

 

7608.10.00

‑Of aluminium, not alloyed

5%
DCS:4%
DCT:5%

7608.20.00

‑Of aluminium alloys

5%
DCS:4%
DCT:5%

 

7609.00.00

ALUMINIUM TUBE OR PIPE FITTINGS (FOR EXAMPLE, COUPLINGS, ELBOWS, SLEEVES)

5%

 

7610

ALUMINIUM STRUCTURES (EXCLUDING PREFABRICATED BUILDINGS OF 9406) AND PARTS OF STRUCTURES (FOR EXAMPLE, BRIDGES AND BRIDGE‑SECTIONS, TOWERS, LATTICE MASTS, ROOFS, ROOFING FRAMEWORKS, DOORS AND WINDOWS AND THEIR FRAMES AND THRESHOLDS FOR DOORS, BALUSTRADES, PILLARS AND COLUMNS); ALUMINIUM PLATES, RODS, PROFILES, TUBES AND THE LIKE, PREPARED FOR USE IN STRUCTURES:

 

7610.10.00

‑Doors, windows and their frames and thresholds for doors

5%
CA:Free

7610.90.00

‑Other

5%
CA:Free

 

7611.00.00

ALUMINIUM RESERVOIRS, TANKS, VATS AND SIMILAR CONTAINERS, FOR ANY MATERIAL (OTHER THAN COMPRESSED OR LIQUEFIED GAS), OF A CAPACITY EXCEEDING 300 L, WHETHER OR NOT LINED OR HEAT‑INSULATED, BUT NOT FITTED WITH MECHANICAL OR THERMAL EQUIPMENT

5%

 

7612

ALUMINIUM CASKS, DRUMS, CANS, BOXES AND SIMILAR CONTAINERS (INCLUDING RIGID OR COLLAPSIBLE TUBULAR CONTAINERS), FOR ANY MATERIAL (OTHER THAN COMPRESSED OR LIQUEFIED GAS), OF A CAPACITY NOT EXCEEDING 300 L, WHETHER OR NOT LINED OR HEAT‑INSULATED, BUT NOT FITTED WITH MECHANICAL OR THERMAL EQUIPMENT:

 

7612.10.00

‑Collapsible tubular containers

Free

7612.90.00

‑Other

5%

 

7613.00.00

ALUMINIUM CONTAINERS FOR COMPRESSED OR LIQUEFIED GAS

5%

 

7614

STRANDED WIRE, CABLES, PLAITED BANDS AND THE LIKE, OF ALUMINIUM, NOT ELECTRICALLY INSULATED:

 

7614.10.00

‑With steel core

5%
DCS:4%
DCT:5%

7614.90.00

‑Other

5%
DCS:4%
DCT:5%

 

7615

TABLE, KITCHEN OR OTHER HOUSEHOLD ARTICLES AND PARTS THEREOF, OF ALUMINIUM; POT SCOURERS AND SCOURING OR POLISHING PADS, GLOVES AND THE LIKE, OF ALUMINIUM; SANITARY WARE AND PARTS THEREOF, OF ALUMINIUM:

 

7615.10.00

‑Table, kitchen or other household articles and parts thereof; pot scourers and scouring or polishing pads, gloves and the like

5%

7615.20.00

‑Sanitary ware and parts thereof

5%

 

7616

OTHER ARTICLES OF ALUMINIUM:

 

7616.10.00

‑Nails, tacks, staples (other than those of 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter‑pins, washers and similar articles

5%

7616.9

‑Other:

 

7616.91.00

‑‑Cloth, grill, netting and fencing, of aluminium wire

5%

7616.99.00

‑‑Other

5%

Chapter 78Lead and articles thereof

Note. 

             1.‑  In this Chapter the following have the meanings hereby assigned to them:

                     (a)  Bars and rods

                            Rolled, extruded, drawn or forged products, not in coils, which have a uniform solid cross‑section along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons (including “flattened circles” and “modified rectangles”, of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). Products with a rectangular (including square), triangular or polygonal cross‑section may have corners rounded along their whole length. The thickness of such products which have a rectangular (including “modified rectangular”) cross‑section exceeds one‑tenth of the width. “Bars and rods” also covers cast or sintered products, of the same forms and dimensions, which have been subsequently worked after production (otherwise than by simple trimming or de‑scaling), provided that they have not thereby assumed the character of articles or products of other headings.

                     (b)  Profiles

                            Rolled, extruded, drawn, forged or formed products, coiled or not, of a uniform cross‑section along their whole length, which do not conform to any of the definitions of bars, rods, wire, plates, sheets, strip, foil, tubes or pipes. “Profiles” also covers cast or sintered products, of the same forms, which have been subsequently worked after production (otherwise than by simple trimming or de‑scaling), provided that they have not thereby assumed the character of articles or products of other headings.

                     (c)  Wire

                            Rolled, extruded or drawn products, in coils, which have a uniform solid cross‑section along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons (including “flattened circles” and “modified rectangles”, of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). Products with a rectangular (including square), triangular or polygonal cross‑section may have corners rounded along their whole length. The thickness of such products which have a rectangular (including “modified rectangular”) cross‑section exceeds one‑tenth of the width.

                     (d)  Plates, sheets, strip and foil

                            Flat‑surfaced products (other than the unwrought products of 7801), coiled or not, of solid rectangular (other than square) cross‑section with or without rounded corners (including “modified rectangles” of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel) of a uniform thickness, which are:

  ‑ of rectangular (including square) shape with a thickness not exceeding one‑tenth of the width,

  ‑ of a shape other than rectangular or square, of any size, provided that they do not assume the character of articles or products of other headings.

                            7804 applies, inter alia, to plates, sheets, strip and foil with patterns (for example, grooves, ribs, chequers, tears, buttons, lozenges) and to such products which have been perforated, corrugated, polished or coated, provided that they do not thereby assume the character of articles or products of other headings.

                     (e)  Tubes and pipes

                            Hollow products, coiled or not, which have a uniform cross‑section with only one enclosed void along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons, and which have a uniform wall thickness. Products with a rectangular (including square), equilateral triangular or regular convex polygonal cross‑section, which may have corners rounded along their whole length, are also to be considered as tubes and pipes provided the inner and outer cross‑sections are concentric and have the same form and orientation. Tubes and pipes of the foregoing cross‑sections may be polished, coated, bent, threaded, drilled, waisted, expanded, cone‑shaped or fitted with flanges, collars or rings.

Subheading Note. 

             1.‑  In this Chapter “refined lead” means:

Metal containing by weight at least 99.9% of lead, provided that the content by weight of any other element does not exceed the limit specified in the following table:

 

Table—Other elements

Element

Limiting content % by weight

Ag    Silver

0.02

As     Arsenic

0.005

Bi     Bismuth

0.05

Ca    Calcium

0.002

Cd    Cadmium

0.002

Cu    Copper

0.08

Fe     Iron

0.002

S       Sulphur

0.002

Sb     Antimony

0.005

Sn     Tin

0.005

Zn    Zinc

0.002

Other (for example Te), each

0.001

 

7801

UNWROUGHT LEAD:

 

7801.10.00

‑Refined lead

Free

7801.9

‑Other:

 

7801.91.00

‑‑Containing by weight antimony as the principal other element

Free

7801.99.00

‑‑Other

Free

 

7802.00.00

LEAD WASTE AND SCRAP

Free

 

7804

LEAD PLATES, SHEETS, STRIP AND FOIL; LEAD POWDERS AND FLAKES:

 

7804.1

‑Plates, sheets, strip and foil:

 

7804.11.00

‑‑Sheets, strip and foil of a thickness (excluding any backing) not exceeding 0.2 mm

Free

7804.19.00

‑‑Other

Free

7804.20.00

‑Powders and flakes

Free

 

7806

OTHER ARTICLES OF LEAD:

 

7806.00.10

‑‑‑Goods, as follows:

       (a)      lead bars, rods, profiles and wire;

       (b)      lead tubes, pipes and tube or pipe fittings (for example, couplings, elbows, sleeves)

Free

7806.00.90

‑‑‑Other

5%

Chapter 79Zinc and articles thereof

Note. 

             1.‑  In this Chapter the following have the meanings hereby assigned to them:

                     (a)  Bars and rods

                            Rolled, extruded, drawn or forged products, not in coils, which have a uniform solid cross‑section along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons (including “flattened circles” and “modified rectangles”, of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). Products with a rectangular (including square), triangular or polygonal cross‑section may have corners rounded along their whole length. The thickness of such products which have a rectangular (including “modified rectangular”) cross‑section exceeds one‑tenth of the width. “Bars and rods” also covers cast or sintered products, of the same forms and dimensions, which have been subsequently worked after production (otherwise than by simple trimming or de‑scaling), provided that they have not thereby assumed the character of articles or products of other headings.

                     (b)  Profiles

                            Rolled, extruded, drawn, forged or formed products, coiled or not, of a uniform cross‑section along their whole length, which do not conform to any of the definitions of bars, rods, wire, plates, sheets, strip, foil, tubes or pipes. “Profiles” also covers cast or sintered products, of the same forms, which have been subsequently worked after production (otherwise than by simple trimming or de‑scaling), provided that they have not thereby assumed the character of articles or products of other headings.

                     (c)  Wire

                            Rolled, extruded or drawn products, in coils, which have a uniform solid cross‑section along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons (including “flattened circles” and “modified rectangles”, of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). Products with a rectangular (including square), triangular or polygonal cross‑section may have corners rounded along their whole length. The thickness of such products which have a rectangular (including “modified rectangular”) cross‑section exceeds one‑tenth of the width.

                     (d)  Plates, sheets, strip and foil

                            Flat‑surfaced products (other than the unwrought products of 7901), coiled or not, of solid rectangular (other than square) cross‑section with or without rounded corners (including “modified rectangles” of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel) of a uniform thickness, which are:

  ‑ of rectangular (including square) shape with a thickness not exceeding one‑tenth of the width,

  ‑ of a shape other than rectangular or square, of any size, provided that they do not assume the character of articles or products of other headings.

                            7905.00.00 applies, inter alia, to plates, sheets, strip and foil with patterns (for example, grooves, ribs, chequers, tears, buttons, lozenges) and to such products which have been perforated, corrugated, polished or coated, provided that they do not thereby assume the character of articles or products of other headings.

                     (e)  Tubes and pipes

                            Hollow products, coiled or not, which have a uniform cross‑section with only one enclosed void along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons, and which have a uniform wall thickness. Products with a rectangular (including square), equilateral triangular or regular convex polygonal cross‑section, which may have corners rounded along their whole length, are also to be considered as tubes and pipes provided the inner and outer cross‑sections are concentric and have the same form and orientation. Tubes and pipes of the foregoing cross‑sections may be polished, coated, bent, threaded, drilled, waisted, expanded, cone‑shaped or fitted with flanges, collars or rings.

Subheading Note. 

             1.‑  In this Chapter the following have the meanings hereby assigned to them:

                     (a)  Zinc, not alloyed

                            Metal containing by weight at least 97.5% of zinc.

                     (b)  Zinc alloys

                            Metallic substances in which zinc predominates by weight over each of the other elements, provided that the total content by weight of such other elements exceeds 2.5%.

                     (c)  Zinc dust

                            Dust obtained by condensation of zinc vapour, consisting of spherical particles which are finer than zinc powders. At least 80% by weight of the particles pass through a sieve with 63 micrometres (microns) mesh. It must contain at least 85% by weight of metallic zinc.

 

7901

UNWROUGHT zinc:

 

7901.1

‑Zinc, not alloyed:

 

7901.11.00

‑‑Containing by weight 99.99% or more of zinc

Free

7901.12.00

‑‑Containing by weight less than 99.99% of zinc

Free

7901.20.00

‑Zinc alloys

Free

 

7902.00.00

ZINC WASTE AND SCRAP

Free

 

7903

ZINC DUST, POWDERS AND FLAKES:

 

7903.10.00

‑Zinc dust

Free

7903.90.00

‑Other

Free

 

7904.00.00

ZINC BARS, RODS, PROFILES AND WIRE

Free

 

7905.00.00

ZINC PLATES, SHEETS, STRIP AND FOIL

Free

 

7907

OTHER ARTICLES OF ZINC:

 

7907.00.10

‑‑‑Zinc tubes, pipes and tube or pipe fittings (for example, couplings, elbows, sleeves)

Free

7907.00.90

‑‑‑Other

5%

Chapter 80Tin and articles thereof

Note. 

             1.‑  In this Chapter the following have the meanings hereby assigned to them:

                     (a)  Bars and rods

                            Rolled, extruded, drawn or forged products, not in coils, which have a uniform solid cross‑section along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons (including “flattened circles” and “modified rectangles”, of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). Products with a rectangular (including square), triangular or polygonal cross‑section may have corners rounded along their whole length. The thickness of such products which have a rectangular (including “modified rectangular”) cross‑section exceeds one‑tenth of the width. “Bars and rods” also covers cast or sintered products, of the same forms and dimensions, which have been subsequently worked after production (otherwise than by simple trimming or de‑scaling), provided that they have not thereby assumed the character of articles or products of other headings.

                     (b)  Profiles

                            Rolled, extruded, drawn, forged or formed products, coiled or not, of a uniform cross‑section along their whole length, which do not conform to any of the definitions of bars, rods, wire, plates, sheets, strip, foil, tubes or pipes. “Profiles” also covers cast or sintered products, of the same forms, which have been subsequently worked after production (otherwise than by simple trimming or de‑scaling), provided that they have not thereby assumed the character of articles or products of other headings.

                     (c)  Wire

                            Rolled, extruded or drawn products, in coils, which have a uniform solid cross‑section along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons (including “flattened circles” and “modified rectangles”, of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). Products with a rectangular (including square), triangular or polygonal cross‑section may have corners rounded along their whole length. The thickness of such products which have a rectangular (including “modified rectangular”) cross‑section exceeds one‑tenth of the width.

                     (d)  Plates, sheets, strip and foil

                            Flat‑surfaced products (other than the unwrought products of 8001), coiled or not, of solid rectangular (other than square) cross‑section with or without rounded corners (including “modified rectangles” of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel) of a uniform thickness, which are:

  ‑ of rectangular (including square) shape with a thickness not exceeding one‑tenth of the width,

  ‑ of a shape other than rectangular or square, of any size, provided that they do not assume the character of articles or products of other headings.

                     (e)  Tubes and pipes

                            Hollow products, coiled or not, which have a uniform cross‑section with only one enclosed void along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons, and which have a uniform wall thickness. Products with a rectangular (including square), equilateral triangular or regular convex polygonal cross‑section, which may have corners rounded along their whole length, are also to be considered as tubes and pipes provided the inner and outer cross‑sections are concentric and have the same form and orientation. Tubes and pipes of the foregoing cross‑sections may be polished, coated, bent, threaded, drilled, waisted, expanded, cone‑shaped or fitted with flanges, collars or rings.

Subheading Note. 

             1.‑  In this Chapter the following have the meanings hereby assigned to them:

                     (a)  Tin, not alloyed

                            Metal containing by weight at least 99% of tin, provided that the content by weight of any bismuth or copper is less than the limit specified in the following table:

 

Table—Other elements

Element

Limiting content % by weight

Bi            Bismuth

0.1

Cu           Copper

0.4

                     (b)  Tin alloys

                            Metallic substances in which tin predominates by weight over each of the other elements, provided that:

                              (i)  the total content by weight of such other elements exceeds 1%; or

                             (ii)  the content by weight of either bismuth or copper is equal to or greater than the limit specified in the foregoing table.

 

8001

UNWROUGHT TIN:

 

8001.10.00

‑Tin, not alloyed

Free

8001.20.00

‑Tin alloys

Free

 

8002.00.00

TIN WASTE AND SCRAP

Free

 

8003.00.00

TIN BARS, RODS, PROFILES AND WIRE

Free

 

8007.00.00

OTHER ARTICLES OF TIN

Free

Chapter 81Other base metals; cermets; articles thereof

Subheading Note. 

             1.‑  Note 1 to Chapter 74, defining “bars and rods”, “profiles”, “wire” and “plates, sheets, strip and foil” applies, mutatis mutandis, to this Chapter.

 

8101

TUNGSTEN (WOLFRAM) AND ARTICLES THEREOF, INCLUDING WASTE AND SCRAP:

 

8101.10.00

‑Powders

Free

8101.9

‑Other:

 

8101.94.00

‑‑Unwrought tungsten, including bars and rods obtained simply by sintering

Free

8101.96.00

‑‑Wire

Free

8101.97.00

‑‑Waste and scrap

Free

8101.99.00

‑‑Other

Free

 

8102

MOLYBDENUM AND ARTICLES THEREOF, INCLUDING WASTE AND SCRAP:

 

8102.10.00

‑Powders

Free

8102.9

‑Other:

 

8102.94.00

‑‑Unwrought molybdenum, including bars and rods obtained simply by sintering

Free

8102.95.00

‑‑Bars and rods, other than those obtained simply by sintering, profiles, plates, sheets, strip and foil

Free

8102.96.00

‑‑Wire

Free

8102.97.00

‑‑Waste and scrap

Free

8102.99.00

‑‑Other

Free

 

8103

TANTALUM AND ARTICLES THEREOF, INCLUDING WASTE AND SCRAP:

 

8103.20.00

‑Unwrought tantalum, including bars and rods obtained simply by sintering; powders

Free

8103.30.00

‑Waste and scrap

Free

8103.90.00

‑Other

Free

 

8104

MAGNESIUM AND ARTICLES THEREOF, INCLUDING WASTE AND SCRAP:

 

8104.1

‑Unwrought magnesium:

 

8104.11.00

‑‑Containing at least 99.8% by weight of magnesium

Free

8104.19.00

‑‑Other

Free

8104.20.00

‑Waste and scrap

Free

8104.30.00

‑Raspings, turnings and granules, graded according to size; powders

Free

8104.90.00

‑Other

Free

 

8105

COBALT MATTES AND OTHER INTERMEDIATE PRODUCTS OF COBALT METALLURGY; COBALT AND ARTICLES THEREOF, INCLUDING WASTE AND SCRAP:

 

8105.20.00

‑Cobalt mattes and other intermediate products of cobalt metallurgy; unwrought cobalt; powders

Free

8105.30.00

‑Waste and scrap

Free

8105.90.00

‑Other

Free

 

8106.00.00

BISMUTH AND ARTICLES THEREOF, INCLUDING WASTE AND SCRAP

Free

 

8107

CADMIUM AND ARTICLES THEREOF, INCLUDING WASTE AND SCRAP:

 

8107.20.00

‑Unwrought cadmium; powders

Free

8107.30.00

‑Waste and scrap

Free

8107.90.00

‑Other

Free

 

8108

TITANIUM AND ARTICLES THEREOF, INCLUDING WASTE AND SCRAP:

 

8108.20.00

‑Unwrought titanium; powders

Free

8108.30.00

‑Waste and scrap

Free

8108.90.00

‑Other

Free

 

8109

ZIRCONIUM AND ARTICLES THEREOF, INCLUDING WASTE AND SCRAP:

 

8109.20.00

‑Unwrought zirconium; powders

Free

8109.30.00

‑Waste and scrap

Free

8109.90.00

‑Other

Free

 

8110

ANTIMONY AND ARTICLES THEREOF, INCLUDING WASTE AND SCRAP:

 

8110.10.00

‑Unwrought antimony; powders

Free

8110.20.00

‑Waste and scrap

Free

8110.90.00

‑Other

Free

 

8111.00.00

MANGANESE AND ARTICLES THEREOF, INCLUDING WASTE AND SCRAP

Free

 

8112

BERYLLIUM, CHROMIUM, GERMANIUM, VANADIUM, GALLIUM, HAFNIUM, INDIUM, NIOBIUM (COLUMBIUM), RHENIUM AND THALLIUM, AND ARTICLES OF THESE METALS, INCLUDING WASTE AND SCRAP:

 

8112.1

‑Beryllium:

 

8112.12.00

‑‑Unwrought; powders

Free

8112.13.00

‑‑Waste and scrap

Free

8112.19.00

‑‑Other

Free

8112.2

‑Chromium:

 

8112.21.00

‑‑Unwrought; powders

Free

8112.22.00

‑‑Waste and scrap

Free

8112.29.00

‑‑Other

Free

8112.5

‑Thallium:

 

8112.51.00

‑‑Unwrought; powders

Free

8112.52.00

‑‑Waste and scrap

Free

8112.59.00

‑‑Other

Free

8112.9

‑Other:

 

8112.92.00

‑‑Unwrought; waste and scrap; powders

Free

8112.99.00

‑‑Other

Free

 

8113.00.00

CERMETS AND ARTICLES THEREOF, INCLUDING WASTE AND SCRAP

Free

Chapter 82Tools, implements, cutlery, spoons and forks, of base metal; parts thereof of base metal

Notes. 

             1.‑  Apart from blow lamps, portable forges, grinding wheels with frameworks, manicure or pedicure sets, and goods of 8209.00.00, this Chapter covers only articles with a blade, working edge, working surface or other working part of:

                     (a)  Base metal;

                     (b)  Metal carbides or cermets;

                     (c)  Precious or semi‑precious stones (natural, synthetic or reconstructed) on a support of base metal, metal carbide or cermet; or

                     (d)  Abrasive materials on a support of base metal, provided that the articles have cutting teeth, flutes, grooves, or the like, of base metal, which retain their identity and function after the application of the abrasive.

             2.‑  Parts of base metal of the articles of this Chapter are to be classified with the articles of which they are parts, except parts separately specified as such and tool‑holders for hand tools (8466). However, parts of general use as defined in Note 2 to Section XV are in all cases excluded from this Chapter.

                   Heads, blades and cutting plates for electric shavers or electric hair clippers are to be classified in 8510.

             3.‑  Sets consisting of one or more knives of 8211 and at least an equal number of articles of 8215 are to be classified in 8215.

 

8201

HAND TOOLS, THE FOLLOWING: SPADES, SHOVELS, MATTOCKS, PICKS, HOES, FORKS AND RAKES; AXES, BILL HOOKS AND SIMILAR HEWING TOOLS; SECATEURS AND PRUNERS OF ANY KIND; SCYTHES, SICKLES, HAY KNIVES, HEDGE SHEARS, TIMBER WEDGES AND OTHER TOOLS OF A KIND USED IN AGRICULTURE, HORTICULTURE OR FORESTRY:

 

8201.10.00

‑Spades and shovels

5%

8201.30.00

‑Mattocks, picks, hoes and rakes

5%

8201.40.00

‑Axes, bill hooks and similar hewing tools

5%

8201.50.00

‑Secateurs and similar one‑handed pruners and shears (including poultry shears)

5%

8201.60.00

‑Hedge shears, two‑handed pruning shears and similar two‑handed shears

5%

8201.90.00

‑Other hand tools of a kind used in agriculture, horticulture or forestry

5%

 

8202

HAND SAWS; BLADES FOR SAWS OF ALL KINDS (INCLUDING SLITTING, SLOTTING OR TOOTHLESS SAW BLADES):

 

8202.10.00

‑Hand saws

5%

8202.20.00

‑Band saw blades

5%

8202.3

‑Circular saw blades (including slitting or slotting saw blades):

 

8202.31.00

‑‑With working part of steel

5%

8202.39.00

‑‑Other, including parts

5%

8202.40.00

‑Chain saw blades

Free

8202.9

‑Other saw blades:

 

8202.91.00

‑‑Straight saw blades, for working metal

5%

8202.99.00

‑‑Other

5%

 

8203

FILES, RASPS, PLIERS (INCLUDING CUTTING PLIERS), PINCERS, TWEEZERS, METAL CUTTING SHEARS, PIPE‑CUTTERS, BOLT CROPPERS, PERFORATING PUNCHES AND SIMILAR HAND TOOLS:

 

8203.10.00

‑Files, rasps and similar tools

5%
CA:Free

8203.20.00

‑Pliers (including cutting pliers), pincers, tweezers and similar tools

5%

8203.30.00

‑Metal cutting shears and similar tools

5%

8203.40.00

‑Pipe‑cutters, bolt croppers, perforating punches and similar tools

5%

 

8204

HAND‑OPERATED SPANNERS AND WRENCHES (INCLUDING TORQUE METER WRENCHES BUT NOT INCLUDING TAP WRENCHES); INTERCHANGEABLE SPANNER SOCKETS, WITH OR WITHOUT HANDLES:

 

8204.1

‑Hand‑operated spanners and wrenches:

 

8204.11.00

‑‑Non‑adjustable

5%

8204.12.00

‑‑Adjustable

5%

8204.20.00

‑Interchangeable spanner sockets, with or without handles

5%

 

8205

HAND TOOLS (INCLUDING GLAZIERS’ DIAMONDS), NOT ELSEWHERE SPECIFIED OR INCLUDED; BLOW LAMPS; VICES, CLAMPS AND THE LIKE, OTHER THAN ACCESSORIES FOR AND PARTS OF, MACHINE‑TOOLS OR WATER‑JET CUTTING MACHINES; ANVILS; PORTABLE FORGES; HAND‑ OR PEDAL‑OPERATED GRINDING WHEELS WITH FRAMEWORKS:

 

8205.10.00

‑Drilling, threading or tapping tools

5%

8205.20.00

‑Hammers and sledge hammers

5%

8205.30.00

‑Planes, chisels, gouges and similar cutting tools for working wood

5%

8205.40.00

‑Screwdrivers

5%

8205.5

‑Other hand tools (including glaziers’ diamonds):

 

8205.51.00

‑‑Household tools

5%

8205.59.00

‑‑Other

5%

8205.60.00

‑Blow lamps

Free

8205.70.00

‑Vices, clamps and the like

5%

8205.90.00

‑Other, including sets of articles of two or more subheadings of this heading

5%

 

8206.00.00

TOOLS OF TWO OR MORE OF 8202 TO 8205, PUT UP IN SETS FOR RETAIL SALE

5%

 

8207

INTERCHANGEABLE TOOLS FOR HAND TOOLS, WHETHER OR NOT POWER‑OPERATED, OR FOR MACHINE‑TOOLS (FOR EXAMPLE, FOR PRESSING, STAMPING, PUNCHING, TAPPING, THREADING, DRILLING, BORING, BROACHING, MILLING, TURNING OR SCREWDRIVING), INCLUDING DIES FOR DRAWING OR EXTRUDING METAL, AND ROCK DRILLING OR EARTH BORING TOOLS:

 

8207.1

‑Rock drilling or earth boring tools:

 

8207.13.00

‑‑With working part of cermets

5%
DCS:4%
CA:Free
DCT:5%

8207.19.00

‑‑Other, including parts

5%
DCS:4%
CA:Free
DCT:5%

8207.20.00

‑Dies for drawing or extruding metal

5%

8207.30.00

‑Tools for pressing, stamping or punching

5%

8207.40.00

‑Tools for tapping or threading

5%

8207.50.00

‑Tools for drilling, other than for rock drilling

5%

8207.60.00

‑Tools for boring or broaching

5%

8207.70.00

‑Tools for milling

5%

8207.80.00

‑Tools for turning

5%

8207.90.00

‑Other interchangeable tools

5%
CA:Free

 

8208

KNIVES AND CUTTING BLADES, FOR MACHINES OR FOR MECHANICAL APPLIANCES:

 

8208.10.00

‑For metal working

5%

8208.20.00

‑For wood working

5%

8208.30.00

‑For kitchen appliances or for machines used by the food industry

5%

8208.40

‑For agricultural, horticultural or forestry machines:

 

8208.40.10

‑‑‑Designed for use with wood chipping machines

5%

8208.40.90

‑‑‑Other

Free

8208.90.00

‑Other

5%

 

8209.00.00

PLATES, STICKS, TIPS AND THE LIKE FOR TOOLS, UNMOUNTED, OF CERMETS

5%
CA:Free

 

8210.00.00

HAND‑OPERATED MECHANICAL APPLIANCES, WEIGHING 10 kg OR LESS, USED IN THE PREPARATION, CONDITIONING OR SERVING OF FOOD OR DRINK

5%
DCS:4%
DCT:5%

 

8211

KNIVES WITH CUTTING BLADES, SERRATED OR NOT (INCLUDING PRUNING KNIVES), OTHER THAN KNIVES OF 8208, AND BLADES THEREFOR:

 

8211.10.00

‑Sets of assorted articles

5%

8211.9

‑Other:

 

8211.91.00

‑‑Table knives having fixed blades

5%

8211.92

‑‑Other knives having fixed blades:

 

8211.92.10

‑‑‑Kitchen knives, butchers’ knives and slaughtermen’s knives

5%

8211.92.90

‑‑‑Other

5%
DCS:Free

8211.93.00

‑‑Knives having other than fixed blades

Free

8211.94

‑‑Blades:

 

8211.94.10

‑‑‑For table knives, kitchen knives, butchers’ knives and slaughtermen’s knives

5%

8211.94.90

‑‑‑Other

5%
DCS:Free

8211.95

‑‑Handles of base metal:

 

8211.95.10

‑‑‑For table knives, kitchen knives, butchers’ knives and slaughtermen’s knives

5%

8211.95.90

‑‑‑Other

5%
DCS:Free

 

8212

RAZORS AND RAZOR BLADES (INCLUDING RAZOR BLADE BLANKS IN STRIPS):

 

8212.10.00

‑Razors

Free

8212.20.00

‑Safety razor blades, including razor blade blanks in strips

Free

8212.90.00

‑Other parts

Free

 

8213.00.00

SCISSORS, TAILORS’ SHEARS AND SIMILAR SHEARS, AND BLADES THEREFOR

Free

 

8214

OTHER ARTICLES OF CUTLERY (FOR EXAMPLE, HAIR CLIPPERS, BUTCHERS’ OR KITCHEN CLEAVERS, CHOPPERS AND MINCING KNIVES, PAPER KNIVES); MANICURE OR PEDICURE SETS AND INSTRUMENTS (INCLUDING NAIL FILES):

 

8214.10.00

‑Paper knives, letter openers, erasing knives, pencil sharpeners and blades therefor

Free

8214.20.00

‑Manicure or pedicure sets and instruments (including nail files)

Free

8214.90.00

‑Other

Free

 

8215

SPOONS, FORKS, LADLES, SKIMMERS, CAKE‑SERVERS, FISH‑KNIVES, BUTTER‑KNIVES, SUGAR TONGS AND SIMILAR KITCHEN OR TABLEWARE:

 

8215.10.00

‑Sets of assorted articles containing at least one article plated with precious metal

5%

8215.20.00

‑Other sets of assorted articles

5%

8215.9

‑Other:

 

8215.91.00

‑‑Plated with precious metal

5%

8215.99.00

‑‑Other

5%

Chapter 83Miscellaneous articles of base metal

Notes. 

             1.‑  For the purposes of this Chapter, parts of base metal are to be classified with their parent articles. However, articles of iron or steel of 7312, 7315, 7317, 7318 or 7320, or similar articles of other base metal (Chapters 74 to 76 and 78 to 81) are not to be taken as parts of articles of this Chapter.

             2.‑  For the purposes of 8302, “castors” means those having a diameter (including, where appropriate, tyres) not exceeding 75 mm, or those having a diameter (including, where appropriate, tyres) exceeding 75 mm provided that the width of the wheel or tyre fitted thereto is less than 30 mm.

 

8301

PADLOCKS AND LOCKS (KEY, COMBINATION OR ELECTRICALLY OPERATED), OF BASE METAL; CLASPS AND FRAMES WITH CLASPS, INCORPORATING LOCKS, OF BASE METAL; KEYS FOR ANY OF THE FOREGOING ARTICLES, OF BASE METAL:

 

8301.10.00

‑Padlocks

5%

8301.20.00

‑Locks of a kind used for motor vehicles

5%

8301.30.00

‑Locks of a kind used for furniture

5%

8301.40.00

‑Other locks

5%

8301.50.00

‑Clasps and frames with clasps, incorporating locks

Free

8301.60.00

‑Parts

5%

8301.70.00

‑Keys presented separately

5%
CA:Free

 

8302

BASE METAL MOUNTINGS, FITTINGS AND SIMILAR ARTICLES SUITABLE FOR FURNITURE, DOORS, STAIRCASES, WINDOWS, BLINDS, COACHWORK, SADDLERY, TRUNKS, CHESTS, CASKETS OR THE LIKE; BASE METAL HAT‑RACKS, HAT‑PEGS, BRACKETS AND SIMILAR FIXTURES; CASTORS WITH MOUNTINGS OF BASE METAL; AUTOMATIC DOOR CLOSERS OF BASE METAL:

 

8302.10.00

‑Hinges

5%

8302.20.00

‑Castors

5%

8302.30.00

‑Other mountings, fittings and similar articles suitable for motor vehicles

5%

8302.4

‑Other mountings, fittings and similar articles:

 

8302.41.00

‑‑Suitable for buildings

5%

8302.42.00

‑‑Other, suitable for furniture

5%

8302.49.00

‑‑Other

5%

8302.50.00

‑Hat‑racks, hat‑pegs, brackets and similar fixtures

5%

8302.60.00

‑Automatic door closers

5%
CA:Free

 

8303.00.00

ARMOURED OR REINFORCED SAFES, STRONG‑BOXES AND DOORS AND SAFE DEPOSIT LOCKERS FOR STRONG‑ROOMS, CASH OR DEED BOXES AND THE LIKE, OF BASE METAL

5%

 

8304.00.00

FILING CABINETS, CARD‑INDEX CABINETS, PAPER TRAYS, PAPER RESTS, PEN TRAYS, OFFICE‑STAMP STANDS AND SIMILAR OFFICE OR DESK EQUIPMENT, OF BASE METAL, OTHER THAN OFFICE FURNITURE OF 9403

5%

 

8305

FITTINGS FOR LOOSE‑LEAF BINDERS OR FILES, LETTER CLIPS, LETTER CORNERS, PAPER CLIPS, INDEXING TAGS AND SIMILAR OFFICE ARTICLES, OF BASE METAL; STAPLES IN STRIPS (FOR EXAMPLE, FOR OFFICES, UPHOLSTERY, PACKAGING), OF BASE METAL:

 

8305.10.00

‑Fittings for loose‑leaf binders or files

5%

8305.20.00

‑Staples in strips

5%

8305.90.00

‑Other, including parts

5%

 

8306

BELLS, GONGS AND THE LIKE, NON‑ELECTRIC, OF BASE METAL; STATUETTES AND OTHER ORNAMENTS, OF BASE METAL; PHOTOGRAPH, PICTURE OR SIMILAR FRAMES, OF BASE METAL; MIRRORS OF BASE METAL:

 

8306.10.00

‑Bells, gongs and the like

5%

8306.2

‑Statuettes and other ornaments:

 

8306.21.00

‑‑Plated with precious metal

5%

8306.29.00

‑‑Other

5%

8306.30.00

‑Photograph, picture or similar frames; mirrors

5%

 

8307

FLEXIBLE TUBING OF BASE METAL, WITH OR WITHOUT FITTINGS:

 

8307.10.00

‑Of iron or steel

5%

8307.90.00

‑Of other base metal

5%

 

8308

CLASPS, FRAMES WITH CLASPS, BUCKLES, BUCKLE‑CLASPS, HOOKS, EYES, EYELETS AND THE LIKE, OF BASE METAL, OF A KIND USED FOR CLOTHING OR CLOTHING ACCESSORIES, FOOTWEAR, JEWELLERY, WRIST‑WATCHES, BOOKS, AWNINGS, LEATHER GOODS, TRAVEL GOODS OR SADDLERY OR FOR OTHER MADE UP ARTICLES; TUBULAR OR BIFURCATED RIVETS, OF BASE METAL; BEADS AND SPANGLES, OF BASE METAL:

 

8308.10.00

‑Hooks, eyes and eyelets

5%

8308.20.00

‑Tubular or bifurcated rivets

5%

8308.90.00

‑Other, including parts

5%

 

8309

STOPPERS, CAPS AND LIDS (INCLUDING CROWN CORKS, SCREW CAPS AND POURING STOPPERS), CAPSULES FOR BOTTLES, THREADED BUNGS, BUNG COVERS, SEALS AND OTHER PACKING ACCESSORIES, OF BASE METAL:

 

8309.10.00

‑Crown corks

5%

8309.90.00

‑Other

5%

 

8310.00.00

SIGN‑PLATES, NAME‑PLATES, ADDRESS‑PLATES AND SIMILAR PLATES, NUMBERS, LETTERS AND OTHER SYMBOLS, OF BASE METAL, EXCLUDING THOSE OF 9405

5%

 

8311

WIRE, RODS, TUBES, PLATES, ELECTRODES AND SIMILAR PRODUCTS, OF BASE METAL OR OF METAL CARBIDES, COATED OR CORED WITH FLUX MATERIAL, OF A KIND USED FOR SOLDERING, BRAZING, WELDING OR DEPOSITION OF METAL OR OF METAL CARBIDES; WIRE AND RODS, OF AGGLOMERATED BASE METAL POWDER, USED FOR METAL SPRAYING:

 

8311.10.00

‑Coated electrodes of base metal, for electric arc‑welding

5%
DCS:4%
DCT:5%

8311.20.00

‑Cored wire of base metal, for electric arc‑welding

5%
DCS:4%
DCT:5%

8311.30.00

‑Coated rods and cored wire, of base metal, for soldering, brazing or welding by flame

5%
DCS:4%
DCT:5%

8311.90.00

‑Other

Free

Section XVIMachinery and mechanical appliances; electrical equipment; parts thereof; sound recorders and reproducers, television image and sound recorders and reproducers, and parts and accessories of such articles

  

Notes. 

             1.‑  This Section does not cover:

                     (a)  Transmission or conveyor belts or belting, of plastics of Chapter 39, or of vulcanised rubber (4010), or other articles of a kind used in machinery or mechanical or electrical appliances or for other technical uses, of vulcanised rubber other than hard rubber (4016);

                     (b)  Articles of leather or of composition leather (4205) or of furskin (4303), of a kind used in machinery or mechanical appliances or for other technical uses;

                     (c)  Bobbins, spools, cops, cones, cores, reels or similar supports, of any material (for example, Chapter 39, 40, 44 or 48 or Section XV);

                     (d)  Perforated cards for Jacquard or similar machines (for example, Chapter 39 or 48 or Section XV);

                     (e)  Transmission or conveyor belts or belting, of textile material (5910.00.00) or other articles of textile material for technical uses (5911);

                      (f)  Precious or semi‑precious stones (natural, synthetic or reconstructed) of 7102 to 7104, or articles wholly of such stones of 7116, except unmounted worked sapphires and diamonds for styli (8522);

                     (g)  Parts of general use, as defined in Note 2 to Section XV, of base metal (Section XV), or similar goods of plastics (Chapter 39);

                     (h)  Drill pipe (7304);

                     (ij)  Endless belts of metal wire or strip (Section XV);

                     (k)  Articles of Chapter 82 or 83;

                      (l)  Articles of Section XVII;

                    (m)  Articles of Chapter 90;

                     (n)  Clocks, watches or other articles of Chapter 91;

                     (o)  Interchangeable tools of 8207 or brushes of a kind used as parts of machines (9603); similar interchangeable tools are to be classified according to the constituent material of their working part (for example, in Chapter 40, 42, 43, 45 or 59 or 6804 or 6909);

                     (p)  Articles of Chapter 95; or

                     (q)  Typewriter or similar ribbons, whether or not on spools or in cartridges (classified according to their constituent material, or in 9612 if inked or otherwise prepared for giving impressions), or monopods, bipods, tripods and similar articles, of 9620.

             2.‑  Subject to Note 1 to this Section, Note 1 to Chapter 84 and Note 1 to Chapter 85, parts of machines (not being parts of the articles of 8484, 8544, 8545, 8546 or 8547) are to be classified according to the following rules:

                     (a)  Parts which are goods included in any of the headings of Chapter 84 or 85 (other than 8409, 8431, 8448, 8466, 8473, 8487, 8503.00.00, 8522, 8529, 8538 and 8548) are in all cases to be classified in their respective headings;

                     (b)  Other parts, if suitable for use solely or principally with a particular kind of machine, or with a number of machines of the same heading (including a machine of 8479 or 8543) are to be classified with the machines of that kind or in 8409, 8431, 8448, 8466, 8473, 8503.00.00, 8522, 8529 or 8538 as appropriate. However, parts which are equally suitable for use principally with the goods of 8517 and 8525 to 8528 are to be classified in 8517;

                     (c)  All other parts are to be classified in 8409, 8431, 8448, 8466, 8473, 8503.00.00, 8522, 8529 or 8538 as appropriate or, failing that, in 8487 or 8548.

             3.‑  Unless the context otherwise requires, composite machines consisting of two or more machines fitted together to form a whole and other machines designed for the purpose of performing two or more complementary or alternative functions are to be classified as if consisting only of that component or as being that machine which performs the principal function.

             4.‑  Where a machine (including a combination of machines) consists of individual components (whether separate or interconnected by piping, by transmission devices, by electric cables or by other devices) intended to contribute together to a clearly defined function covered by one of the headings in Chapter 84 or Chapter 85, then the whole falls to be classified in the heading appropriate to that function.

             5.‑  For the purposes of these Notes, “machine” means any machine, machinery, plant, equipment, apparatus or appliance cited in the headings of Chapter 84 or 85.

Additional Notes. 

             1.‑  In this Section, “computer control” means a controlling unit that incorporates at least one electronic microcircuit that is part of the microcircuitry of the controlling unit, being microcircuitry that enables the unit:

                     (a)  to store and process, or manipulate, data;

                     (b)  when programmed, to automatically control the operation of the appliance, machine or apparatus independently of human control;

                     (c)  to wholly or substantially control the operation and movement of the appliance, machine or apparatus by the use of a numeric‑servo closed loop; and

                     (d)  to be re‑programmable in respect of the unit’s control of the appliance, machine or apparatus.

             2.‑  For the purposes of Note 2(a) to this Section, “respective headings” does not include headings in which goods are classifiable as parts.

             3.‑  For the purposes of Note 2(b) to this Section, “with the machines of that kind” means in the same heading as those machines unless there is a separate heading for parts of or for those machines (not being 8487 or 8548).

             4.‑  “Accessories” in 8448, 8466, 8473 or 8522 does not apply to goods which are otherwise described in any of the headings of Chapters 84 and 85.

Chapter 84Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof

Notes. 

             1.‑  This Chapter does not cover:

                     (a)  Millstones, grindstones or other articles of Chapter 68;

                     (b)  Machinery or appliances (for example, pumps) of ceramic material and ceramic parts of machinery or appliances of any material (Chapter 69);

                     (c)  Laboratory glassware (7017); machinery, appliances or other articles for technical uses or parts thereof, of glass (7019 or 7020);

                     (d)  Articles of 7321 or 7322 or similar articles of other base metals (Chapters 74 to 76 or 78 to 81);

                     (e)  Vacuum cleaners of 8508;

                      (f)  Electro‑mechanical domestic appliances of 8509; digital cameras of 8525;

                     (g)  Radiators for the articles of Section XVII; or

                     (h)  Hand‑operated mechanical floor sweepers, not motorised (9603).

             2.‑  Subject to the operation of Note 3 to Section XVI and subject to Note 9 to this Chapter, a machine or appliance which answers to a description in one or more of 8401 to 8424, or 8486 and at the same time to a description in one or other of 8425 to 8480 is to be classified under the appropriate heading of the former group or under 8486, as the case may be, and not the latter group.

8419 does not, however, cover:

                     (a)  Germination plant, incubators or brooders (8436);

                     (b)  Grain dampening machines (8437);

                     (c)  Diffusing apparatus for sugar juice extraction (8438);

                     (d)  Machinery for the heat‑treatment of textile yarns, fabrics or made up textile articles (8451); or

                     (e)  Machinery, plant or laboratory equipment, designed for a mechanical operation, in which a change of temperature, even if necessary, is subsidiary.

8422 does not cover:

                     (a)  Sewing machines for closing bags or similar containers (8452); or

                     (b)  Office machinery of 8472.

8424 does not cover:

                     (a)  Ink‑jet printing machines (8443); or

                     (b)  Water‑jet cutting machines (8456).

             3.‑  A machine‑tool for working any material which answers to a description in 8456 and at the same time to a description in 8457, 8458, 8459, 8460, 8461, 8464 or 8465 is to be classified in 8456.

             4.‑  8457 applies only to machine‑tools for working metal, other than lathes (including turning centres), which can carry out different types of machining operations either:

                     (a)  by automatic tool change from a magazine or the like in conformity with a machining programme (machining centres),

                     (b)  by the automatic use, simultaneously or sequentially, of different unit heads working on a fixed position workpiece (unit construction machines, single station), or

                     (c)  by the automatic transfer of the workpiece to different unit heads (multi‑station transfer machines).

   5.‑    (A)   For the purposes of 8471, “automatic data processing machines” means machines capable of:

                              (i)  Storing the processing program or programs and at least the data immediately necessary for the execution of the program;

                             (ii)  Being freely programmed in accordance with the requirements of the user;

                            (iii)  Performing arithmetical computations specified by the user; and

                            (iv)  Executing, without human intervention, a processing program which requires them to modify their execution, by logical decision during the processing run.

                     (B)  Automatic data processing machines may be in the form of systems consisting of a variable number of separate units.

                     (C)  Subject to paragraphs (D) and (E) below, a unit is to be regarded as being part of an automatic data processing system if it meets all of the following conditions:

                              (i)  It is of a kind solely or principally used in an automatic data processing system;

                             (ii)  It is connectable to the central processing unit either directly or through one or more other units; and

                            (iii)  It is able to accept or deliver data in a form (codes or signals) which can be used by the system.

                            Separately presented units of an automatic data processing machine are to be classified in 8471.

                            However, keyboards, X‑Y co‑ordinate input devices and disk storage units which satisfy the conditions of paragraphs (C)(ii) and (C)(iii) above, are in all cases to be classified as units of 8471.

                    (D)  8471 does not cover the following when presented separately, even if they meet all of the conditions set forth in Note 5(C) above:

                              (i)  Printers, copying machines, facsimile machines, whether or not combined;

                             (ii)  Apparatus for the transmission or reception of voice, images or other data, including apparatus for communication in a wired or wireless network (such as a local or wide area network);

                            (iii)  Loud speakers and microphones;

                            (iv)  Television cameras, digital cameras and video camera recorders;

                             (v)  Monitors and projectors, not incorporating television reception apparatus.

                     (E)  Machines incorporating or working in conjunction with an automatic data processing machine and performing a specific function other than data processing are to be classified in the headings appropriate to their respective functions or, failing that, in residual headings.

             6.‑  8482 applies, inter alia, to polished steel balls, the maximum and minimum diameters of which do not differ from the nominal diameter by more than 1% or by more than 0.05 mm, whichever is less. Other steel balls are to be classified in 7326.

             7.‑  A machine which is used for more than one purpose is, for the purposes of classification, to be treated as if its principal purpose were its sole purpose.

Subject to Note 2 to this Chapter and Note 3 to Section XVI, a machine the principal purpose of which is not described in any heading or for which no one purpose is the principal purpose is, unless the context otherwise requires, to be classified in 8479.
8479 also covers machines for making rope or cable (for example, stranding, twisting or cabling machines) from metal wire, textile yarn or any other material or from a combination of such materials.

             8.‑  For the purposes of 8470, “pocket‑size” applies only to machines the dimensions of which do not exceed 170 mm x 100 mm x 45 mm.

   9.‑    (A)   Notes 9(a) and (b) to Chapter 85 also apply with respect to “semiconductor devices” and “electronic integrated circuits”, respectively, as used in this Note and in 8486. However, for the purposes of this Note and of 8486, “semiconductor devices” also covers photosensitive semiconductor devices and light emitting diodes (LED).

                     (B)  For the purposes of this Note and of 8486, “manufacture of flat panel displays” covers the fabrication of substrates into a flat panel. It does not cover the manufacture of glass or the assembly of printed circuit boards or other electronic components onto the flat panel. “Flat panel display” does not cover cathode‑ray tube technology.

                     (C)  8486 also includes machines and apparatus solely or principally of a kind used for:

                              (i)  the manufacture or repair of masks and reticles;

                             (ii)  assembling semiconductor devices or electronic integrated circuits; or

                            (iii)  lifting, handling, loading or unloading of boules, wafers, semiconductor devices, electronic integrated circuits and flat panel displays.

                    (D)  Subject to Note 1 to Section XVI and Note 1 to Chapter 84, machines and apparatus answering to the description in 8486 are to be classified in that heading and in no other heading of this Schedule.

Subheading Notes. 

             1.‑  For the purposes of 8465.20, “machining centres” applies only to machine‑tools for working wood, cork, bone, hard rubber, hard plastics or similar hard materials, which can carry out different types of machining operations by automatic tool change from a magazine or the like in conformity with a machining programme.

             2.‑  For the purposes of 8471.49.00, “systems” means automatic data processing machines whose units satisfy the conditions laid down in Note 5(C) to Chapter 84 and which comprise at least a central processing unit, one input unit (for example, a keyboard or a scanner), and one output unit (for example, a visual display unit or a printer).

             3.‑  For the purposes of 8481.20, “valves for oleohydraulic or pneumatic transmissions” means valves which are used specifically in the transmission of “fluid power” in a hydraulic or pneumatic system, where the energy source is supplied in the form of pressurised fluids (liquid or gas). These valves may be of any type (for example, pressure‑reducing type, check type). 8481.20 takes precedence over all other subheadings of 8481.

             4.‑  8482.40 applies only to bearings with cylindrical rollers of a uniform diameter not exceeding 5 mm and having a length which is at least three times the diameter. The ends of the rollers may be rounded.

Additional Notes. 

             1.‑  In this Chapter, the power of an internal combustion piston engine shall be taken to be the net output, expressed in kilowatts, that the engine is capable of delivering continuously at a stated crankshaft speed under standard operating conditions.

             2.‑  For the purposes of this Chapter, “operating weight” means the combined weight of the machine, the driver and a tank full of fuel.

             3.‑  8422 does not cover machines which collate and load, or merely load or unload, packs or units of goods (in one or more tiers or layers) onto pallets, slipsheets or the like (8428).

             4.‑  8486.10.10, 8486.20.10, 8486.30.10 and 8486.40.10 do not apply to water‑jet cutting machines (8486.10.90, 8486.20.90, 8486.30.90 or 8486.40.9).

 

8401

NUCLEAR REACTORS; FUEL ELEMENTS (CARTRIDGES), NON‑IRRADIATED, FOR NUCLEAR REACTORS; MACHINERY AND APPARATUS FOR ISOTOPIC SEPARATION:

 

8401.10.00

‑Nuclear reactors

5%
DCS:4%
CA:Free
DCT:5%

8401.20.00

‑Machinery and apparatus for isotopic separation, and parts thereof

Free

8401.30.00

‑Fuel elements (cartridges), non‑irradiated

5%
DCS:4%
CA:Free
DCT:5%

8401.40.00

‑Parts of nuclear reactors

5%
DCS:4%
CA:Free
DCT:5%

 

8402

STEAM OR OTHER VAPOUR GENERATING BOILERS (OTHER THAN CENTRAL HEATING HOT WATER BOILERS CAPABLE ALSO OF PRODUCING LOW PRESSURE STEAM); SUPER‑HEATED WATER BOILERS:

 

8402.1

‑Steam or other vapour generating boilers:

 

8402.11.00

‑‑Watertube boilers with a steam production exceeding 45 t per hour

5%
CA:Free

8402.12.00

‑‑Watertube boilers with a steam production not exceeding 45 t per hour

5%
CA:Free

8402.19.00

‑‑Other vapour generating boilers, including hybrid boilers

5%
CA:Free

8402.20.00

‑Super‑heated water boilers

5%
CA:Free

8402.90.00

‑Parts

5%
CA:Free

 

8403

CENTRAL HEATING BOILERS OTHER THAN THOSE OF 8402:

 

8403.10.00

‑Boilers

5%

8403.90.00

‑Parts

5%

 

8404

AUXILIARY PLANT FOR USE WITH BOILERS OF 8402 OR 8403 (FOR EXAMPLE, ECONOMISERS, SUPER‑HEATERS, SOOT REMOVERS, GAS RECOVERERS); CONDENSERS FOR STEAM OR OTHER VAPOUR POWER UNITS:

 

8404.10.00

‑Auxiliary plant for use with boilers of 8402 or 8403

5%
CA:Free

8404.20.00

‑Condensers for steam or other vapour power units

5%
CA:Free

8404.90.00

‑Parts

5%
CA:Free

 

8405

PRODUCER GAS OR WATER GAS GENERATORS, WITH OR WITHOUT THEIR PURIFIERS; ACETYLENE GAS GENERATORS AND SIMILAR WATER PROCESS GAS GENERATORS, WITH OR WITHOUT THEIR PURIFIERS:

 

8405.10.00

‑Producer gas or water gas generators, with or without their purifiers; acetylene gas generators and similar water process gas generators, with or without their purifiers

5%
DCS:4%
CA:Free
DCT:5%

8405.90.00

‑Parts

5%
DCS:4%
CA:Free
DCT:5%

 

8406

STEAM TURBINES AND OTHER VAPOUR TURBINES:

 

8406.10.00

‑Turbines for marine propulsion

Free

8406.8

‑Other turbines:

 

8406.81.00

‑‑Of an output exceeding 40 MW

Free

8406.82.00

‑‑Of an output not exceeding 40 MW

Free

8406.90.00

‑Parts

Free

 

8407

SPARK‑IGNITION RECIPROCATING OR ROTARY INTERNAL COMBUSTION PISTON ENGINES:

 

8407.10.00

‑Aircraft engines

Free

8407.2

‑Marine propulsion engines:

 

8407.21.00

‑‑Outboard motors

Free

8407.29.00

‑‑Other

Free

8407.3

‑Reciprocating piston engines of a kind used for the propulsion of vehicles of Chapter 87:

 

8407.31.00

‑‑Of a cylinder capacity not exceeding 50 cm3

Free

8407.32.00

‑‑Of a cylinder capacity exceeding 50 cm3 but not exceeding 250 cm3

Free

8407.33

‑‑Of a cylinder capacity exceeding 250 cm3 but not exceeding 1 000 cm3:

 

8407.33.10

‑‑‑For use in the assembly or manufacture of passenger motor vehicles

5%
CA:Free

8407.33.90

‑‑‑Other

Free

8407.34

‑‑Of a cylinder capacity exceeding 1 000 cm3:

 

8407.34.10

‑‑‑For use in the assembly or manufacture of passenger motor vehicles

5%
CA:Free

8407.34.20

‑‑‑Engines, NSA, of a kind used with vehicles of 8701.20.00, 8702, 8703, 8704 or 8705

5%
DCS:4%
DCT:5%

8407.34.90

‑‑‑Other

Free

8407.90

‑Other engines:

 

8407.90.10

‑‑‑For use in the assembly or manufacture of passenger motor vehicles

5%
CA:Free

8407.90.20

‑‑‑Engines, NSA, of a kind used with vehicles of 8701.20.00, 8702, 8703, 8704 or 8705

Free

8407.90.30

‑‑‑Engines, NSA, having a power not exceeding 3.6 kW

5%

8407.90.90

‑‑‑Other

Free

 

8408

COMPRESSION‑IGNITION INTERNAL COMBUSTION PISTON ENGINES (DIESEL OR SEMI‑DIESEL ENGINES):

 

8408.10.00

‑Marine propulsion engines

Free

8408.20

‑Engines of a kind used for the propulsion of vehicles of Chapter 87:

 

8408.20.10

‑‑‑For use in the assembly or manufacture of passenger motor vehicles

5%
CA:Free

8408.20.20

‑‑‑Engines, NSA, of a kind used with vehicles of 8701.20.00, 8702, 8703, 8704 or 8705

5%
DCS:4%
DCT:5%

8408.20.90

‑‑‑Other

Free

8408.90.00

‑Other engines

Free

 

8409

PARTS SUITABLE FOR USE SOLELY OR PRINCIPALLY WITH THE ENGINES OF 8407 OR 8408:

 

8409.10.00

‑For aircraft engines

5%

8409.9

‑Other:

 

8409.91

‑‑Suitable for use solely or principally with spark‑ignition internal combustion piston engines:

 

8409.91.10

‑‑‑Parts, as follows:

       (a)      carburettors, and parts thereof, not being suitable for use with motorcycles;

       (b)      piston pins;

        (c)      piston rings;

       (d)      valves;

        (e)      of engines of a kind used with vehicles of 8701.20.00, 8702, 8703, 8704 or 8705;

        (f)      of a kind used with engines having a power not exceeding 4.5 kW of 8407.31.00

5%

8409.91.90

‑‑‑Other

Free

8409.99

‑‑Other:

 

8409.99.10

‑‑‑Parts, as follows:

       (a)      piston pins;

       (b)      piston rings;

        (c)      valves;

       (d)      for engines of a kind used with vehicles of 8701.20.00, 8702, 8703, 8704 or 8705, but not including fuel injection equipment and parts thereof unless for use in the assembly or manufacture of those vehicles

5%

8409.99.90

‑‑‑Other

Free

 

8410

HYDRAULIC TURBINES, WATER WHEELS, AND REGULATORS THEREFOR:

 

8410.1

‑Hydraulic turbines and water wheels:

 

8410.11.00

‑‑Of a power not exceeding 1 000 kW

5%

8410.12.00

‑‑Of a power exceeding 1 000 kW but not exceeding 10 000 kW

5%

8410.13.00

‑‑Of a power exceeding 10 000 kW

5%

8410.90.00

‑Parts, including regulators

5%

 

8411

TURBO‑JETS, TURBO‑PROPELLERS AND OTHER GAS TURBINES:

 

8411.1

‑Turbo‑jets:

 

8411.11.00

‑‑Of a thrust not exceeding 25 kN

Free

8411.12.00

‑‑Of a thrust exceeding 25 kN

Free

8411.2

‑Turbo‑propellers:

 

8411.21.00

‑‑Of a power not exceeding 1 100 kW

Free

8411.22.00

‑‑Of a power exceeding 1 100 kW

Free

8411.8

‑Other gas turbines:

 

8411.81.00

‑‑Of a power not exceeding 5 000 kW

Free

8411.82.00

‑‑Of a power exceeding 5 000 kW

Free

8411.9

‑Parts:

 

8411.91.00

‑‑Of turbo‑jets or turbo‑propellers

Free

8411.99.00

‑‑Other

Free

 

8412

OTHER ENGINES AND MOTORS:

 

8412.10.00

‑Reaction engines other than turbo‑jets

Free

8412.2

‑Hydraulic power engines and motors:

 

8412.21.00

‑‑Linear acting (cylinders)

5%

8412.29.00

‑‑Other

5%

8412.3

‑Pneumatic power engines and motors:

 

8412.31.00

‑‑Linear acting (cylinders)

5%

8412.39

‑‑Other:

 

8412.39.10

‑‑‑Goods, as follows:

       (a)      actuators for the mechanical operation of control valves;

       (b)      engines operated by an external source of compressed gas and having a maximum gas consumption rate not exceeding 0.07 m3/minute

5%

8412.39.90

‑‑‑Other

Free

8412.80.00

‑Other

Free

8412.90

‑Parts:

 

8412.90.10

‑‑‑For engines of 8412.10.00, 8412.39.90 or 8412.80.00

Free

8412.90.90

‑‑‑Other

5%

 

8413

PUMPS FOR LIQUIDS, WHETHER OR NOT FITTED WITH A MEASURING DEVICE; LIQUID ELEVATORS:

 

8413.1

‑Pumps fitted or designed to be fitted with a measuring device:

 

8413.11.00

‑‑Pumps for dispensing fuel or lubricants, of the type used in filling‑stations or in garages

5%

8413.19.00

‑‑Other

5%

8413.20.00

‑Hand pumps, other than those of 8413.11.00 or 8413.19.00

5%

8413.30

‑Fuel, lubricating or cooling medium pumps for internal combustion piston engines:

 

8413.30.10

‑‑‑Pumps, as follows:

       (a)      fuel pumps, used solely or principally with compression‑ignition engines;

       (b)      oil or petrol pumps for use in the assembly or manufacture of engines for:

                      (i)     vehicles, having a power exceeding 7.46 kW, of 8701.10.00, 8701.91.11, 8701.91.19, 8701.92.10, 8701.93.10, 8701.94.10 or 8701.95.10; or

                     (ii)     vehicles of 8701.30.00, 8701.91.90, 8701.92.90, 8701.93.90, 8701.94.90 or 8701.95.90, other than tractors for dumpers; or

                    (iii)     vehicles of 8709.19.00

Free

8413.30.90

‑‑‑Other

5%

8413.40.00

‑Concrete pumps

5%

8413.50

‑Other reciprocating positive displacement pumps:

 

8413.50.10

‑‑‑Specially designed for use in the mining or metallurgical industries, other than pulp pumps for use in conjunction with ore dressing machines

5%
DCS:4%
DCT:5%

8413.50.90

‑‑‑Other

5%

8413.60

‑Other rotary positive displacement pumps:

 

8413.60.10

‑‑‑Specially designed for use in the mining or metallurgical industries, other than pulp pumps for use in conjunction with ore dressing machines

5%
DCS:4%
DCT:5%

8413.60.90

‑‑‑Other

5%

8413.70

‑Other centrifugal pumps:

 

8413.70.10

‑‑‑Specially designed for use in the mining or metallurgical industries, other than pulp pumps for use in conjunction with ore dressing machines

5%
DCS:4%
DCT:5%

8413.70.90

‑‑‑Other

5%

8413.8

‑Other pumps; liquid elevators:

 

8413.81

‑‑Pumps:

 

8413.81.10

‑‑‑Specially designed for use in the mining or metallurgical industries, other than pulp pumps for use in conjunction with ore dressing machines

5%
DCS:4%
DCT:5%

8413.81.90

‑‑‑Other

5%

8413.82.00

‑‑Liquid elevators

5%

8413.9

‑Parts:

 

8413.91

‑‑Of pumps:

 

8413.91.10

‑‑‑Specially designed for use in the mining or metallurgical industries, other than pulp pumps for use in conjunction with ore dressing machines

5%
DCS:4%
DCT:5%

8413.91.20

‑‑‑Of pumps of 8413.30.10

Free

8413.91.90

‑‑‑Other

5%

8413.92.00

‑‑Of liquid elevators

5%

 

8414

AIR OR VACUUM PUMPS, AIR OR OTHER GAS COMPRESSORS AND FANS; VENTILATING OR RECYCLING HOODS INCORPORATING A FAN, WHETHER OR NOT FITTED WITH FILTERS:

 

8414.10

‑Vacuum pumps:

 

8414.10.10

‑‑‑Vacuum pumps of a kind used solely or principally for the manufacture of semiconductors or flat panel displays

5%

 

From 1 July 2018

3.75%

 

From 1 July 2019

Free

8414.10.90

‑‑‑Other

5%

8414.20.00

‑Hand‑ or foot‑operated air pumps

Free

8414.30.00

‑Compressors of a kind used in refrigerating equipment

5%

8414.40

‑Air compressors mounted on a wheeled chassis for towing:

 

8414.40.10

‑‑‑Reciprocating or rotary, having a capacity not exceeding 3 m3 of free air delivered per minute

5%

8414.40.20

‑‑‑Reciprocating or rotary, having a capacity exceeding 3 m3 but not exceeding 25 m3 of free air delivered per minute

5%
DCS:4%
DCT:5%

8414.40.90

‑‑‑Other

Free

8414.5

‑Fans:

 

8414.51.00

‑‑Table, floor, wall, window, ceiling or roof fans, with a self‑contained electric motor of an output not exceeding 125 W

5%

8414.59

‑‑Other:

 

8414.59.10

‑‑‑Of a kind used as components in passenger motor vehicles

5%

8414.59.20

‑‑‑Of a kind used solely or principally for cooling microprocessors, telecommunication apparatus, automatic data processing machines or units of automatic data processing machines

5%
DCS:4%
DCT:5%

 

From 1 July 2018

2.5%

 

From 1 July 2019

Free

8414.59.90

‑‑‑Other

5%
DCS:4%
DCT:5%

8414.60.00

‑Hoods having a maximum horizontal side not exceeding 120 cm

5%

8414.80

‑Other:

 

8414.80.1

‑‑‑Reciprocating or rotary air compressors or pumps, having a capacity not exceeding 3 m3 of free air delivered per minute:

 

8414.80.11

‑‑‑‑Aquarium aerators

Free

8414.80.19

‑‑‑‑Other

5%

8414.80.20

‑‑‑Reciprocating or rotary air compressors or pumps, having a capacity exceeding 3 m3 but not exceeding 25 m3 of free air delivered per minute

5%
DCS:4%
DCT:5%

8414.80.30

‑‑‑Electro‑mechanical tools for working in the hand, with self‑contained electric motor, NSA

5%

8414.80.90

‑‑‑Other

Free

8414.90

‑Parts:

 

8414.90.10

‑‑‑Of goods of 8414.20.00, 8414.40.90 or 8414.80.90

Free

8414.90.20

‑‑‑Of goods of 8414.40.20 or 8414.80.20

5%
DCS:4%
DCT:5%

8414.90.90

‑‑‑Other

5%

 

8415

AIR CONDITIONING MACHINES, COMPRISING A MOTOR‑DRIVEN FAN AND ELEMENTS FOR CHANGING THE TEMPERATURE AND HUMIDITY, INCLUDING THOSE MACHINES IN WHICH THE HUMIDITY CANNOT BE SEPARATELY REGULATED:

 

8415.10.00

‑Of a kind designed to be fixed to a window, wall, ceiling or floor, self‑contained or “split‑system”

5%

8415.20.00

‑Of a kind used for persons, in motor vehicles

5%

8415.8

‑Other:

 

8415.81.00

‑‑Incorporating a refrigerating unit and a valve for reversal of the cooling/heat cycle (reversible heat pumps)

5%

8415.82.00

‑‑Other, incorporating a refrigerating unit

5%

8415.83.00

‑‑Not incorporating a refrigerating unit

5%

8415.90.00

‑Parts

5%

 

8416

FURNACE BURNERS FOR LIQUID FUEL, FOR PULVERISED SOLID FUEL OR FOR GAS; MECHANICAL STOKERS, INCLUDING THEIR MECHANICAL GRATES, MECHANICAL ASH DISCHARGERS AND SIMILAR APPLIANCES:

 

8416.10.00

‑Furnace burners for liquid fuel

5%
CA:Free

8416.20.00

‑Other furnace burners, including combination burners

5%
CA:Free

8416.30.00

‑Mechanical stokers, including their mechanical grates, mechanical ash dischargers and similar appliances

5%
DCS:4%
DCT:5%

8416.90.00

‑Parts

5%
CA:Free

 

8417

INDUSTRIAL OR LABORATORY FURNACES AND OVENS, INCLUDING INCINERATORS, NON‑ELECTRIC:

 

8417.10.00

‑Furnaces and ovens for the roasting, melting or other heat‑treatment of ores, pyrites or of metals

5%
DCS:4%
DCT:5%

8417.20.00

‑Bakery ovens, including biscuit ovens

5%
DCS:4%
DCT:5%

8417.80.00

‑Other

5%
DCS:4%
DCT:5%

8417.90.00

‑Parts

5%
DCS:4%
DCT:5%

 

8418

REFRIGERATORS, FREEZERS AND OTHER REFRIGERATING OR FREEZING EQUIPMENT, ELECTRIC OR OTHER; HEAT PUMPS OTHER THAN AIR CONDITIONING MACHINES OF 8415:

 

8418.10.00

‑Combined refrigerator‑freezers, fitted with separate external doors

5%

8418.2

‑Refrigerators, household type:

 

8418.21.00

‑‑Compression‑type

5%

8418.29.00

‑‑Other

5%

8418.30.00

‑Freezers of the chest type, not exceeding 800 L capacity

5%

8418.40.00

‑Freezers of the upright type, not exceeding 900 L capacity

5%

8418.50.00

‑Other furniture (chests, cabinets, display counters, show‑cases and the like) for storage and display, incorporating refrigerating or freezing equipment

5%

8418.6

‑Other refrigerating or freezing equipment; heat pumps:

 

8418.61.00

‑‑Heat pumps other than air conditioning machines of 8415

5%

8418.69.00

‑‑Other

5%

8418.9

‑Parts:

 

8418.91.00

‑‑Furniture designed to receive refrigerating or freezing equipment

5%

8418.99.00

‑‑Other

5%

 

8419

MACHINERY, PLANT OR LABORATORY EQUIPMENT, WHETHER OR NOT ELECTRICALLY HEATED (EXCLUDING FURNACES, OVENS AND OTHER EQUIPMENT OF 8514), FOR THE TREATMENT OF MATERIALS BY A PROCESS INVOLVING A CHANGE OF TEMPERATURE SUCH AS HEATING, COOKING, ROASTING, DISTILLING, RECTIFYING, STERILISING, PASTEURISING, STEAMING, DRYING, EVAPORATING, VAPORISING, CONDENSING OR COOLING, OTHER THAN MACHINERY OR PLANT OF A KIND USED FOR DOMESTIC PURPOSES; INSTANTANEOUS OR STORAGE WATER HEATERS, NON‑ELECTRIC:

 

8419.1

‑Instantaneous or storage water heaters, non‑electric:

 

8419.11.00

‑‑Instantaneous gas water heaters

5%

8419.19.00

‑‑Other

5%

8419.20.00

‑Medical, surgical or laboratory sterilisers

5%
DCS:4%
DCT:5%

8419.3

‑Dryers:

 

8419.31.00

‑‑For agricultural products

5%
DCS:4%
DCT:5%

8419.32.00

‑‑For wood, paper pulp, paper or paperboard

5%
DCS:4%
DCT:5%

8419.39

‑‑Other:

 

8419.39.10

‑‑‑Electro‑mechanical tools for working in the hand,
with self‑contained electric motor

5%

8419.39.90

‑‑‑Other

5%
DCS:4%
DCT:5%

8419.40.00

‑Distilling or rectifying plant

5%
DCS:4%
DCT:5%

8419.50

‑Heat exchange units:

 

8419.50.20

‑‑‑Of fluoropolymers and with inlet and outlet tube bores with inside diameters measuring 3 cm or less

5%
DCS:4%
DCT:5%

 

From 1 July 2018

2.5%

 

From 1 July 2019

Free

8419.50.30

‑‑‑Of a kind used as components in passenger motor vehicles, NSA

5%

8419.50.90

‑‑‑Other

5%
DCS:4%
DCT:5%

8419.60.00

‑Machinery for liquefying air or other gases

Free

8419.8

‑Other machinery, plant and equipment:

 

8419.81

‑‑For making hot drinks or for cooking or heating food:

 

8419.81.10

‑‑‑Hot drink dispensing machines

5%

8419.81.90

‑‑‑Other

5%
DCS:4%
DCT:5%

8419.89

‑‑Other:

 

8419.89.20

‑‑‑Electro‑mechanical tools for working in the hand,
with self‑contained electric motor

5%

8419.89.90

‑‑‑Other

5%
DCS:4%
DCT:5%

8419.90.00

‑Parts

5%

 

8420

CALENDERING OR OTHER ROLLING MACHINES, OTHER THAN FOR METALS OR GLASS, AND CYLINDERS THEREFOR:

 

8420.10.00

‑Calendering or other rolling machines

Free

8420.9

‑Parts:

 

8420.91.00

‑‑Cylinders

5%
DCS:4%
DCT:5%

8420.99.00

‑‑Other

Free

 

8421

CENTRIFUGES, INCLUDING CENTRIFUGAL DRYERS; FILTERING OR PURIFYING MACHINERY AND APPARATUS FOR LIQUIDS OR GASES:

 

8421.1

‑Centrifuges, including centrifugal dryers:

 

8421.11.00

‑‑Cream separators

Free

8421.12.00

‑‑Clothes‑dryers

5%

8421.19.00

‑‑Other

5%

8421.2

‑Filtering or purifying machinery and apparatus for liquids:

 

8421.21

‑‑For filtering or purifying water:

 

8421.21.10

‑‑‑Filtering machinery and apparatus for use with swimming pools

5%

8421.21.90

‑‑‑Other

5%
DCS:4%
DCT:5%

8421.22.00

‑‑For filtering or purifying beverages other than water

5%
DCS:4%
DCT:5%

8421.23.00

‑‑Oil or petrol‑filters for internal combustion engines

5%

8421.29

‑‑Other:

 

8421.29.10

‑‑‑Liquid filtering or purifying machinery and apparatus made of fluoropolymers and with filter or purifier membrane thickness not exceeding 140 microns

5%
DCS:4%
DCT:5%

 

From 1 July 2018

2.5%

 

From 1 July 2019

Free

8421.29.90

‑‑‑Other

5%
DCS:4%
DCT:5%

8421.3

‑Filtering or purifying machinery and apparatus for gases:

 

8421.31.00

‑‑Intake air filters for internal combustion engines

5%

8421.39

‑‑Other:

 

8421.39.10

‑‑‑Filtering or purifying machinery and apparatus for gases, with stainless steel housing, and with inlet and outlet tube bores with inside diameters not exceeding 1.3 cm

5%
DCS:4%
DCT:5%

 

From 1 July 2018

3.75%

 

From 1 July 2019

Free

8421.39.90

‑‑‑Other

5%
DCS:4%
DCT:5%

8421.9

‑Parts:

 

8421.91.00

‑‑Of centrifuges, including centrifugal dryers

5%

8421.99

‑‑Other:

 

8421.99.10

‑‑‑Of goods of 8421.29.10 or 8421.39.10

5%

 

From 1 July 2018

3.75%

 

From 1 July 2019

Free

8421.99.90

‑‑‑Other

5%

 

8422

DISH WASHING MACHINES; MACHINERY FOR CLEANING OR DRYING BOTTLES OR OTHER CONTAINERS; MACHINERY FOR FILLING, CLOSING, SEALING OR LABELLING BOTTLES, CANS, BOXES, BAGS OR OTHER CONTAINERS; MACHINERY FOR CAPSULING BOTTLES, JARS, TUBES AND SIMILAR CONTAINERS; OTHER PACKING OR WRAPPING MACHINERY (INCLUDING HEAT‑SHRINK WRAPPING MACHINERY); MACHINERY FOR AERATING BEVERAGES:

 

8422.1

‑Dish washing machines:

 

8422.11.00

‑‑Of the household type

5%

8422.19.00

‑‑Other

5%
DCS:4%
DCT:5%

8422.20.00

‑Machinery for cleaning or drying bottles or other containers

5%
DCS:4%
DCT:5%

8422.30

‑Machinery for filling, closing, sealing or labelling bottles, cans, boxes, bags or other containers; machinery for capsuling bottles, jars, tubes and similar containers; machinery for aerating beverages:

 

8422.30.10

‑‑‑Electro‑mechanical tools for working in the hand,
with self‑contained electric motor

5%

8422.30.90

‑‑‑Other

5%
DCS:4%
DCT:5%

8422.40

‑Other packing or wrapping machinery (including heat‑shrink wrapping machinery):

 

8422.40.10

‑‑‑Electro‑mechanical tools for working in the hand,
with self‑contained electric motor

5%

8422.40.90

‑‑‑Other

Free

8422.90.00

‑Parts

5%

 

8423

WEIGHING MACHINERY (EXCLUDING BALANCES OF A SENSITIVITY OF 5 cg OR BETTER), INCLUDING WEIGHT OPERATED COUNTING OR CHECKING MACHINES; WEIGHING MACHINE WEIGHTS OF ALL KINDS:

 

8423.10.00

‑Personal weighing machines, including baby scales; household scales

5%

8423.20

‑Scales for continuous weighing of goods on conveyors:

 

8423.20.10

‑‑‑Using electronic means for gauging weights

5%
DCS:4%
CA:Free
DCT:5%

 

From 1 July 2018

2.5%
CA:Free

 

From 1 July 2019

Free

8423.20.90

‑‑‑Other

5%
DCS:4%
CA:Free
DCT:5%

8423.30

‑Constant weight scales and scales for discharging a predetermined weight of material into a bag or container, including hopper scales:

 

8423.30.10

‑‑‑Using electronic means for gauging weights

5%
DCS:4%
DCT:5%

 

From 1 July 2018

2.5%

 

From 1 July 2019

Free

8423.30.90

‑‑‑Other

5%
DCS:4%
DCT:5%

8423.8

‑Other weighing machinery:

 

8423.81

‑‑Having a maximum weighing capacity not exceeding 30 kg:

 

8423.81.10

‑‑‑Using electronic means for gauging weights

5%
DCS:4%
DCT:5%

 

From 1 July 2018

2.5%

 

From 1 July 2019

Free

8423.81.90

‑‑‑Other

5%
DCS:4%
DCT:5%

8423.82

‑‑Having a maximum weighing capacity exceeding 30 kg but not exceeding 5 000 kg:

 

8423.82.10

‑‑‑Using electronic means for gauging weights, excluding machines for weighing motor vehicles

5%
DCS:4%
DCT:5%

 

From 1 July 2018

2.5%

 

From 1 July 2019

Free

8423.82.90

‑‑‑Other

5%
DCS:4%
DCT:5%

8423.89

‑‑Other:

 

8423.89.10

‑‑‑Using electronic means for gauging weights

5%
DCS:4%
CA:Free
DCT:5%

 

From 1 July 2018

2.5%
CA:Free

 

From 1 July 2019

Free

8423.89.90

‑‑‑Other

5%
DCS:4%
CA:Free
DCT:5%

8423.90

‑Weighing machine weights of all kinds; parts of weighing machinery:

 

8423.90.10

‑‑‑Parts of machinery using electronic means for gauging weights

5%
DCS:4%
DCT:5%

 

From 1 July 2018

2.5%

 

From 1 July 2019

Free

8423.90.90

‑‑‑Other

5%
DCS:4%
DCT:5%

 

8424

MECHANICAL APPLIANCES (WHETHER OR NOT HAND‑OPERATED) FOR PROJECTING, DISPERSING OR SPRAYING LIQUIDS OR POWDERS; FIRE EXTINGUISHERS, WHETHER OR NOT CHARGED; SPRAY GUNS AND SIMILAR APPLIANCES; STEAM OR SAND BLASTING MACHINES AND SIMILAR JET PROJECTING MACHINES:

 

8424.10.00

‑Fire extinguishers, whether or not charged

5%

8424.20.00

‑Spray guns and similar appliances

5%
DCS:4%
DCT:5%

8424.30

‑Steam or sand blasting machines and similar jet projecting machines:

 

8424.30.10

‑‑‑Electro‑mechanical tools for working in the hand,
with self‑contained electric motor

5%

8424.30.90

‑‑‑Other

5%
DCS:4%
DCT:5%

8424.4

‑Agricultural or horticultural sprayers:

 

8424.41.00

‑‑Portable sprayers

5%

8424.49.00

‑‑Other

5%

8424.8

‑Other appliances:

 

8424.82.00

‑‑Agricultural or horticultural

5%

8424.89

‑‑Other:

 

8424.89.10

‑‑‑Devices for washing motor vehicle windscreens, headlamps or windows

5%

8424.89.20

‑‑‑Mechanical appliances for projecting, dispersing or spraying of a kind used solely or principally for the manufacture of printed circuits or printed circuit assemblies

5%
DCS:4%
DCT:5%

 

From 1 July 2018

3.75%

 

From 1 July 2019

Free

8424.89.40

‑‑‑Electro‑mechanical tools for working in the hand,
with self‑contained electric motor

5%

8424.89.90

‑‑‑Other

5%
DCS:4%
DCT:5%

8424.90

‑Parts:

 

8424.90.10

‑‑‑Of goods of 8424.89.20

5%

 

From 1 July 2018

3.75%

 

From 1 July 2019

Free

8424.90.20

‑‑‑Of goods of 8424.30.10

5%

8424.90.90

‑‑‑Other

5%

 

8425

PULLEY TACKLE AND HOISTS OTHER THAN SKIP HOISTS; WINCHES AND CAPSTANS; JACKS:

 

8425.1

‑Pulley tackle and hoists other than skip hoists or hoists of a kind used for raising vehicles:

 

8425.11.00

‑‑Powered by electric motor

5%

8425.19.00

‑‑Other

5%

8425.3

‑Winches; capstans:

 

8425.31.00

‑‑Powered by electric motor

5%

8425.39.00

‑‑Other

5%

8425.4

‑Jacks; hoists of a kind used for raising vehicles:

 

8425.41.00

‑‑Built‑in jacking systems of a type used in garages

5%

8425.42.00

‑‑Other jacks and hoists, hydraulic

5%

8425.49.00

‑‑Other

5%

 

8426

SHIPS’ DERRICKS; CRANES, INCLUDING CABLE CRANES; MOBILE LIFTING FRAMES, STRADDLE CARRIERS AND WORKS TRUCKS FITTED WITH A CRANE:

 

8426.1

‑Overhead travelling cranes, transporter cranes, gantry cranes, bridge cranes, mobile lifting frames and straddle carriers:

 

8426.11.00

‑‑Overhead travelling cranes on fixed support

5%

8426.12.00

‑‑Mobile lifting frames on tyres and straddle carriers

5%

8426.19.00

‑‑Other

5%

8426.20.00

‑Tower cranes

5%

8426.30.00

‑Portal or pedestal jib cranes

5%

8426.4

‑Other machinery, self‑propelled:

 

8426.41.00

‑‑On tyres

5%

8426.49.00

‑‑Other

5%

8426.9

‑Other machinery:

 

8426.91.00

‑‑Designed for mounting on road vehicles

5%

8426.99.00

‑‑Other

5%

 

8427

FORK‑LIFT TRUCKS; OTHER WORKS TRUCKS FITTED WITH LIFTING OR HANDLING EQUIPMENT:

 

8427.10.00

‑Self‑propelled trucks powered by an electric motor

5%

8427.20.00

‑Other self‑propelled trucks

5%

8427.90.00

‑Other trucks

5%

 

8428

OTHER LIFTING, HANDLING, LOADING OR UNLOADING MACHINERY (FOR EXAMPLE, LIFTS, ESCALATORS, CONVEYORS, TELEFERICS):

 

8428.10.00

‑Lifts and skip hoists

5%

8428.20.00

‑Pneumatic elevators and conveyors

5%

8428.3

‑Other continuous‑action elevators and conveyors, for goods or materials:

 

8428.31.00

‑‑Specially designed for underground use

5%

8428.32.00

‑‑Other, bucket type

5%

8428.33.00

‑‑Other, belt type

5%

8428.39.00

‑‑Other

5%

8428.40.00

‑Escalators and moving walkways

5%

8428.60.00

‑Teleferics, chair‑lifts, ski‑draglines; traction mechanisms for funiculars

5%

8428.90.00

‑Other machinery

5%

 

8429

SELF‑PROPELLED BULLDOZERS, ANGLEDOZERS, GRADERS, LEVELLERS, SCRAPERS, MECHANICAL SHOVELS, EXCAVATORS, SHOVEL LOADERS, TAMPING MACHINES AND ROAD ROLLERS:

 

8429.1

‑Bulldozers and angledozers:

 

8429.11.00

‑‑Track laying

Free

8429.19.00

‑‑Other

Free

8429.20.00

‑Graders and levellers

5%

8429.30.00

‑Scrapers

5%

8429.40.00

‑Tamping machines and road rollers

5%

8429.5

‑Mechanical shovels, excavators and shovel loaders:

 

8429.51

‑‑Front‑end shovel loaders:

 

8429.51.10

‑‑‑Goods, as follows:

       (a)      track laying;

       (b)      underground loaders having a payload capacity exceeding 16 t

Free

8429.51.90

‑‑‑Other

5%

8429.52

‑‑Machinery with a 360o revolving superstructure:

 

8429.52.10

‑‑‑Goods, as follows:

       (a)      electric walking draglines;

       (b)      excavators of the track laying or wheeled type having an operating weight exceeding 12 t;

        (c)      mechanical shovels having a shovel capacity exceeding 5 m3

Free

8429.52.90

‑‑‑Other

5%

8429.59

‑‑Other:

 

8429.59.10

‑‑‑Mechanical shovels having a shovel capacity exceeding 5 m3

Free

8429.59.90

‑‑‑Other

5%

 

8430

OTHER MOVING, GRADING, LEVELLING, SCRAPING, EXCAVATING, TAMPING, COMPACTING, EXTRACTING OR BORING MACHINERY, FOR EARTH, MINERALS OR ORES; PILE‑DRIVERS AND PILE‑EXTRACTORS; SNOW‑PLOUGHS AND SNOW‑BLOWERS:

 

8430.10.00

‑Pile‑drivers and pile‑extractors

Free

8430.20.00

‑Snow‑ploughs and snow‑blowers

Free

8430.3

‑Coal or rock cutters and tunnelling machinery:

 

8430.31.00

‑‑Self‑propelled

Free

8430.39.00

‑‑Other

Free

8430.4

‑Other boring or sinking machinery:

 

8430.41.00

‑‑Self‑propelled

5%
CA:Free

8430.49.00

‑‑Other

5%
CA:Free

8430.50.00

‑Other machinery, self‑propelled

5%
DCS:Free

8430.6

‑Other machinery, not self‑propelled:

 

8430.61.00

‑‑Tamping or compacting machinery

5%

8430.69

‑‑Other:

 

8430.69.10

‑‑‑Scrapers

5%

8430.69.90

‑‑‑Other

Free

 

8431

PARTS SUITABLE FOR USE SOLELY OR PRINCIPALLY WITH THE MACHINERY OF 8425 TO 8430:

 

8431.10.00

‑Of machinery of 8425

5%

8431.20.00

‑Of machinery of 8427

5%

8431.3

‑Of machinery of 8428:

 

8431.31.00

‑‑Of lifts, skip hoists or escalators

5%

8431.39.00

‑‑Other

5%

8431.4

‑Of machinery of 8426, 8429 or 8430:

 

8431.41.00

‑‑Buckets, shovels, grabs and grips

5%

8431.42.00

‑‑Bulldozer or angledozer blades

5%

8431.43.00

‑‑Parts for boring or sinking machinery of 8430.41.00 or 8430.49.00

5%
DCS:4%
CA:Free
DCT:5%

8431.49

‑‑Other:

 

8431.49.10

‑‑‑Of machinery of 8430.3

Free

8431.49.90

‑‑‑Other

5%

 

8432

AGRICULTURAL, HORTICULTURAL OR FORESTRY MACHINERY FOR SOIL PREPARATION OR CULTIVATION; LAWN OR SPORTS‑GROUND ROLLERS:

 

8432.10.00

‑Ploughs

Free

8432.2

‑Harrows, scarifiers, cultivators, weeders and hoes:

 

8432.21.00

‑‑Disc harrows

Free

8432.29.00

‑‑Other

Free

8432.3

‑Seeders, planters and transplanters:

 

8432.31.00

‑‑No‑till direct seeders, planters and transplanters

Free

8432.39.00

‑‑Other

Free

8432.4

‑Manure spreaders and fertiliser distributors:

 

8432.41.00

‑‑Manure spreaders

Free

8432.42.00

‑‑Fertiliser distributors

Free

8432.80.00

‑Other machinery

Free

8432.90.00

‑Parts

Free

 

8433

HARVESTING OR THRESHING MACHINERY, INCLUDING STRAW OR FODDER BALERS; GRASS OR HAY MOWERS; MACHINES FOR CLEANING, SORTING OR GRADING EGGS, FRUIT OR OTHER AGRICULTURAL PRODUCE, OTHER THAN MACHINERY OF 8437:

 

8433.1

‑Mowers for lawns, parks or sports‑grounds:

 

8433.11.00

‑‑Powered, with the cutting device rotating in a horizontal plane

5%

8433.19.00

‑‑Other

5%

8433.20.00

‑Other mowers, including cutter bars for tractor mounting

5%
DCS:4%
DCT:5%

8433.30.00

‑Other haymaking machinery

5%
DCS:4%
DCT:5%

8433.40

‑Straw or fodder balers, including pick‑up balers:

 

8433.40.10

‑‑‑Round bale hay balers

Free

8433.40.90

‑‑‑Other

5%
DCS:4%
CA:Free
DCT:5%

8433.5

‑Other harvesting machinery; threshing machinery:

 

8433.51.00

‑‑Combine harvester‑threshers

Free

8433.52.00

‑‑Other threshing machinery

5%
DCS:4%
DCT:5%

8433.53.00

‑‑Root or tuber harvesting machines

5%
DCS:4%
DCT:5%

8433.59

‑‑Other:

 

8433.59.10

‑‑‑Goods, as follows:

       (a)      cotton picking machines;

       (b)      green maize harvesters;

        (c)      tree shakers

Free

8433.59.90

‑‑‑Other

5%
DCS:4%
DCT:5%

8433.60.00

‑Machines for cleaning, sorting or grading eggs, fruit or other agricultural produce

5%
DCS:4%
DCT:5%

8433.90

‑Parts:

 

8433.90.10

‑‑‑Of machines of 8433.51.00

Free

8433.90.90

‑‑‑Other

5%
DCS:4%
DCT:5%

 

8434

MILKING MACHINES AND DAIRY MACHINERY:

 

8434.10.00

‑Milking machines

5%
DCS:4%
DCT:5%

8434.20.00

‑Dairy machinery

5%
DCS:4%
DCT:5%

8434.90.00

‑Parts

5%
DCS:4%
DCT:5%

 

8435

PRESSES, CRUSHERS AND SIMILAR MACHINERY USED IN THE MANUFACTURE OF WINE, CIDER, FRUIT JUICES OR SIMILAR BEVERAGES:

 

8435.10.00

‑Machinery

Free

8435.90.00

‑Parts

Free

 

8436

OTHER AGRICULTURAL, HORTICULTURAL, FORESTRY, POULTRY‑KEEPING OR BEE‑KEEPING MACHINERY, INCLUDING GERMINATION PLANT FITTED WITH MECHANICAL OR THERMAL EQUIPMENT; POULTRY INCUBATORS AND BROODERS:

 

8436.10.00

‑Machinery for preparing animal feeding stuffs

5%
DCS:4%
CA:Free
DCT:5%

8436.2

‑Poultry‑keeping machinery; poultry incubators and brooders:

 

8436.21.00

‑‑Poultry incubators and brooders

5%
DCS:4%
CA:Free
DCT:5%

8436.29.00

‑‑Other

5%
DCS:4%
CA:Free
DCT:5%

8436.80

‑Other machinery:

 

8436.80.10

‑‑‑Goods, as follows:

       (a)      tree fellers;

       (b)      tree harvesters

Free

8436.80.90

‑‑‑Other

5%
DCS:4%
CA:Free
DCT:5%

8436.9

‑Parts:

 

8436.91.00

‑‑Of poultry‑keeping machinery or poultry incubators and brooders

5%
DCS:4%
CA:Free
DCT:5%

8436.99.00

‑‑Other

5%
DCS:4%
CA:Free
DCT:5%

 

8437

MACHINES FOR CLEANING, SORTING OR GRADING SEED, GRAIN OR DRIED LEGUMINOUS VEGETABLES; MACHINERY USED IN THE MILLING INDUSTRY OR FOR THE WORKING OF CEREALS OR DRIED LEGUMINOUS VEGETABLES, OTHER THAN FARM‑TYPE MACHINERY:

 

8437.10.00

‑Machines for cleaning, sorting or grading seed, grain or dried leguminous vegetables

5%
DCS:4%
DCT:5%

8437.80.00

‑Other machinery

Free

8437.90.00

‑Parts

Free

 

8438

MACHINERY, NOT SPECIFIED OR INCLUDED ELSEWHERE IN THIS CHAPTER, FOR THE INDUSTRIAL PREPARATION OR MANUFACTURE OF FOOD OR DRINK, OTHER THAN MACHINERY FOR THE EXTRACTION OR PREPARATION OF ANIMAL OR FIXED VEGETABLE FATS OR OILS:

 

8438.10

‑Bakery machinery and machinery for the manufacture of macaroni, spaghetti or similar products:

 

8438.10.10

‑‑‑For the manufacture of macaroni, spaghetti or similar products

Free

8438.10.90

‑‑‑Other

5%
DCS:4%
DCT:5%

8438.20.00

‑Machinery for the manufacture of confectionery, cocoa or chocolate

5%
DCS:4%
DCT:5%

8438.30.00

‑Machinery for sugar manufacture

5%
DCS:4%
DCT:5%

8438.40.00

‑Brewery machinery

5%
DCS:4%
DCT:5%

8438.50.00

‑Machinery for the preparation of meat or poultry

5%

8438.60.00

‑Machinery for the preparation of fruits, nuts or vegetables

5%

8438.80.00

‑Other machinery

5%

8438.90

‑Parts:

 

8438.90.10

‑‑‑Of machinery of 8438.10, 8438.20.00, 8438.30.00 or 8438.40.00

5%
DCS:4%
DCT:5%

8438.90.90

‑‑‑Other

5%

 

8439

MACHINERY FOR MAKING PULP OF FIBROUS CELLULOSIC MATERIAL OR FOR MAKING OR FINISHING PAPER OR PAPERBOARD:

 

8439.10.00

‑Machinery for making pulp of fibrous cellulosic material

Free

8439.20.00

‑Machinery for making paper or paperboard

Free

8439.30.00

‑Machinery for finishing paper or paperboard

5%
DCS:4%
DCT:5%

8439.9

‑Parts:

 

8439.91.00

‑‑Of machinery for making pulp of fibrous cellulosic material

Free

8439.99.00

‑‑Other

5%
DCS:4%
CA:Free
DCT:5%

 

8440

BOOK‑BINDING MACHINERY, INCLUDING BOOK‑SEWING MACHINES:

 

8440.10.00

‑Machinery

Free

8440.90.00

‑Parts

Free

 

8441

OTHER MACHINERY FOR MAKING UP PAPER PULP, PAPER OR PAPERBOARD, INCLUDING CUTTING MACHINES OF ALL KINDS:

 

8441.10

‑Cutting machines:

 

8441.10.10

‑‑‑Machines, as follows:

       (a)      sheeters (machines for cutting out sheets);

       (b)      slitters;

        (c)      slitter‑rewinders

5%
DCS:4%
DCT:5%

8441.10.90

‑‑‑Other

Free

8441.20.00

‑Machines for making bags, sacks or envelopes

Free

8441.30.00

‑Machines for making cartons, boxes, cases, tubes, drums or similar containers, other than by moulding

Free

8441.40.00

‑Machines for moulding articles in paper pulp, paper or paperboard

Free

8441.80

‑Other machinery:

 

8441.80.10

‑‑‑Rewinders

5%
DCS:4%
DCT:5%

8441.80.90

‑‑‑Other

Free

8441.90

‑Parts:

 

8441.90.10

‑‑‑Of machines of 8441.10.10 and 8441.80.10

5%
DCS:4%
DCT:5%

8441.90.90

‑‑‑Other

Free

 

8442

MACHINERY, APPARATUS AND EQUIPMENT (OTHER THAN THE MACHINES OF 8456 TO 8465) FOR PREPARING OR MAKING PLATES, CYLINDERS OR OTHER PRINTING COMPONENTS; PLATES, CYLINDERS AND OTHER PRINTING COMPONENTS; PLATES, CYLINDERS AND LITHOGRAPHIC STONES, PREPARED FOR PRINTING PURPOSES (FOR EXAMPLE, PLANED, GRAINED OR POLISHED):

 

8442.30.00

‑Machinery, apparatus and equipment

Free

8442.40.00

‑Parts of the foregoing machinery, apparatus or equipment

Free

8442.50.00

‑Plates, cylinders and other printing components; plates, cylinders and lithographic stones, prepared for printing purposes (for example, planed, grained or polished)

Free

 

8443

PRINTING MACHINERY USED FOR PRINTING BY MEANS OF PLATES, CYLINDERS AND OTHER PRINTING COMPONENTS OF 8442; OTHER PRINTERS, COPYING MACHINES AND FACSIMILE MACHINES, WHETHER OR NOT COMBINED; PARTS AND ACCESSORIES THEREOF:

 

8443.1

‑Printing machinery used for printing by means of plates, cylinders and other printing components of 8442:

 

8443.11.00

‑‑Offset printing machinery, reel‑fed

Free

8443.12.00

‑‑Offset printing machinery, sheet‑fed, office type (using sheets with one side not exceeding 22 cm and the other side not exceeding 36 cm in the unfolded state)

Free

8443.13.00

‑‑Other offset printing machinery

Free

8443.14.00

‑‑Letterpress printing machinery, reel‑fed, excluding flexographic printing

Free

8443.15.00

‑‑Letterpress printing machinery, other than reel‑fed, excluding flexographic printing

Free

8443.16.00

‑‑Flexographic printing machinery

Free

8443.17.00

‑‑Gravure printing machinery

Free

8443.19

‑‑Other:

 

8443.19.10

‑‑‑Hot stamping machines

5%
DCS:4%
CA:Free
DCT:5%

8443.19.90

‑‑‑Other

Free

8443.3

‑Other printers, copying machines and facsimile machines, whether or not combined:

 

8443.31.00

‑‑Machines which perform two or more of the functions of printing, copying or facsimile transmission, capable of connecting to an automatic data processing machine or to a network

Free

8443.32.00

‑‑Other, capable of connecting to an automatic data processing machine or to a network

Free

8443.39.00

‑‑Other

Free

8443.9

‑Parts and accessories:

 

8443.91

‑‑Parts and accessories of printing machinery used for printing by means of plates, cylinders and other printing components of 8442:

 

8443.91.10

‑‑‑Of machines of 8443.19.10

3.75%
CA:Free

 

From 1 July 2017

2.5%
CA:Free

 

From 1 July 2018

1.25%
CA:Free

 

From 1 July 2019

Free

8443.91.90

‑‑‑Other

Free

8443.99.00

‑‑Other

Free

 

8444.00.00

MACHINES FOR EXTRUDING, DRAWING, TEXTURING OR CUTTING MAN‑MADE TEXTILE MATERIALS

Free

 

8445

MACHINES FOR PREPARING TEXTILE FIBRES; SPINNING, DOUBLING OR TWISTING MACHINES AND OTHER MACHINERY FOR PRODUCING TEXTILE YARNS; TEXTILE REELING OR WINDING (INCLUDING WEFT‑WINDING) MACHINES AND MACHINES FOR PREPARING TEXTILE YARNS FOR USE ON THE MACHINES OF 8446 OR 8447:

 

8445.1

‑Machines for preparing textile fibres:

 

8445.11.00

‑‑Carding machines

Free

8445.12.00

‑‑Combing machines

Free

8445.13.00

‑‑Drawing or roving machines

Free

8445.19.00

‑‑Other

Free

8445.20.00

‑Textile spinning machines

Free

8445.30.00

‑Textile doubling or twisting machines

Free

8445.40.00

‑Textile winding (including weft‑winding) or reeling machines

Free

8445.90.00

‑Other

Free

 

8446

WEAVING MACHINES (LOOMS):

 

8446.10.00

‑For weaving fabrics of a width not exceeding 30 cm

Free

8446.2

‑For weaving fabrics of a width exceeding 30 cm, shuttle type:

 

8446.21.00

‑‑Power looms

Free

8446.29.00

‑‑Other

Free

8446.30.00

‑For weaving fabrics of a width exceeding 30 cm, shuttleless type

Free

 

8447

KNITTING MACHINES, STITCH‑BONDING MACHINES AND MACHINES FOR MAKING GIMPED YARN, TULLE, LACE, EMBROIDERY, TRIMMINGS, BRAID OR NET AND MACHINES FOR TUFTING:

 

8447.1

‑Circular knitting machines:

 

8447.11.00

‑‑With cylinder diameter not exceeding 165 mm

Free

8447.12.00

‑‑With cylinder diameter exceeding 165 mm

Free

8447.20.00

‑Flat knitting machines; stitch‑bonding machines

Free

8447.90.00

‑Other

5%
DCS:Free

 

8448

AUXILIARY MACHINERY FOR USE WITH MACHINES OF 8444.00.00, 8445, 8446 OR 8447 (FOR EXAMPLE, DOBBIES, JACQUARDS, AUTOMATIC STOP MOTIONS, SHUTTLE CHANGING MECHANISMS); PARTS AND ACCESSORIES SUITABLE FOR USE SOLELY OR PRINCIPALLY WITH THE MACHINES OF THIS HEADING OR OF 8444.00.00, 8445, 8446 OR 8447 (FOR EXAMPLE, SPINDLES AND SPINDLE FLYERS, CARD CLOTHING, COMBS, EXTRUDING NIPPLES, SHUTTLES, HEALDS AND HEALD‑FRAMES, HOSIERY NEEDLES):

 

8448.1

‑Auxiliary machinery for machines of 8444.00.00, 8445, 8446 or 8447:

 

8448.11.00

‑‑Dobbies and Jacquards; card reducing, copying, punching or assembling machines for use therewith

Free

8448.19.00

‑‑Other

Free

8448.20.00

‑Parts and accessories of machines of 8444.00.00 or of their auxiliary machinery

Free

8448.3

‑Parts and accessories of machines of 8445 or of their auxiliary machinery:

 

8448.31.00

‑‑Card clothing

Free

8448.32.00

‑‑Of machines for preparing textile fibres, other than card clothing

Free

8448.33.00

‑‑Spindles, spindle flyers, spinning rings and ring travellers

Free

8448.39.00

‑‑Other

Free

8448.4

‑Parts and accessories of weaving machines (looms) or of their auxiliary machinery:

 

8448.42.00

‑‑Reeds for looms, healds and heald‑frames

Free

8448.49.00

‑‑Other

Free

8448.5

‑Parts and accessories of machines of 8447 or of their auxiliary machinery:

 

8448.51.00

‑‑Sinkers, needles and other articles used in forming stitches

Free

8448.59.00

‑‑Other

Free

 

8449.00.00

MACHINERY FOR THE MANUFACTURE OR FINISHING OF FELT OR NONWOVENS IN THE PIECE OR IN SHAPES, INCLUDING MACHINERY FOR MAKING FELT HATS; BLOCKS FOR MAKING HATS

Free

 

8450

HOUSEHOLD OR LAUNDRY‑TYPE WASHING MACHINES, INCLUDING MACHINES WHICH BOTH WASH AND DRY:

 

8450.1

‑Machines, each of a dry linen capacity not exceeding 10 kg:

 

8450.11.00

‑‑Fully‑automatic machines

5%

8450.12.00

‑‑Other machines, with built‑in centrifugal drier

5%

8450.19.00

‑‑Other

5%

8450.20.00

‑Machines, each of a dry linen capacity exceeding 10 kg

5%
DCS:4%
DCT:5%

8450.90.00

‑Parts

5%

 

8451

MACHINERY (OTHER THAN MACHINES OF 8450) FOR WASHING, CLEANING, WRINGING, DRYING, IRONING, PRESSING (INCLUDING FUSING PRESSES), BLEACHING, DYEING, DRESSING, FINISHING, COATING OR IMPREGNATING TEXTILE YARNS, FABRICS OR MADE UP TEXTILE ARTICLES AND MACHINES FOR APPLYING THE PASTE TO THE BASE FABRIC OR OTHER SUPPORT USED IN THE MANUFACTURE OF FLOOR COVERINGS SUCH AS LINOLEUM; MACHINES FOR REELING, UNREELING, FOLDING, CUTTING OR PINKING TEXTILE FABRICS:

 

8451.10.00

‑Dry‑cleaning machines

5%
DCS:4%
DCT:5%

8451.2

‑Drying machines:

 

8451.21.00

‑‑Each of a dry linen capacity not exceeding 10 kg

5%

8451.29.00

‑‑Other

5%
DCS:4%
DCT:5%

8451.30.00

‑Ironing machines and presses (including fusing presses)

Free

8451.40.00

‑Washing, bleaching or dyeing machines

Free

8451.50.00

‑Machines for reeling, unreeling, folding, cutting or pinking textile fabrics

Free

8451.80.00

‑Other machinery

5%
DCS:Free

8451.90.00

‑Parts

5%

 

8452

SEWING MACHINES, OTHER THAN BOOK‑SEWING MACHINES OF 8440; FURNITURE, BASES AND COVERS SPECIALLY DESIGNED FOR SEWING MACHINES; SEWING MACHINE NEEDLES:

 

8452.10.00

‑Sewing machines of the household type

Free

8452.2

‑Other sewing machines:

 

8452.21.00

‑‑Automatic units

Free

8452.29.00

‑‑Other

Free

8452.30.00

‑Sewing machine needles

Free

8452.90.00

‑Furniture, bases and covers for sewing machines and parts thereof; other parts of sewing machines

Free

 

8453

MACHINERY FOR PREPARING, TANNING OR WORKING HIDES, SKINS OR LEATHER OR FOR MAKING OR REPAIRING FOOTWEAR OR OTHER ARTICLES OF HIDES, SKINS OR LEATHER, OTHER THAN SEWING MACHINES:

 

8453.10.00

‑Machinery for preparing, tanning or working hides, skins or leather

Free

8453.20.00

‑Machinery for making or repairing footwear

Free

8453.80.00

‑Other machinery

Free

8453.90.00

‑Parts

Free

 

8454

CONVERTERS, LADLES, INGOT MOULDS AND CASTING MACHINES, OF A KIND USED IN METALLURGY OR IN METAL FOUNDRIES:

 

8454.10.00

‑Converters

5%
DCS:4%
CA:Free
DCT:5%

8454.20.00

‑Ingot moulds and ladles

5%
DCS:4%
CA:Free
DCT:5%

8454.30.00

‑Casting machines

5%
DCS:4%
CA:Free
DCT:5%

8454.90.00

‑Parts

5%
DCS:4%
CA:Free
DCT:5%

 

8455

METAL‑ROLLING MILLS AND ROLLS THEREFOR:

 

8455.10.00

‑Tube mills

Free

8455.2

‑Other rolling mills:

 

8455.21.00

‑‑Hot or combination hot and cold

Free

8455.22.00

‑‑Cold

Free

8455.30.00

‑Rolls for rolling mills

Free

8455.90.00

‑Other parts

Free

 

8456

MACHINE‑TOOLS FOR WORKING ANY MATERIAL BY REMOVAL OF MATERIAL, BY LASER OR OTHER LIGHT OR PHOTON BEAM, ULTRASONIC, ELECTRO‑DISCHARGE, ELECTRO‑CHEMICAL, ELECTRON BEAM, IONIC‑BEAM OR PLASMA ARC PROCESSES; WATER‑JET CUTTING MACHINES:

 

8456.1

‑Operated by laser or other light or photon beam processes:

 

8456.11.00

‑‑Operated by laser

Free

8456.12.00

‑‑Operated by other light or photon beam processes

Free

8456.20.00

‑Operated by ultrasonic processes

Free

8456.30.00

‑Operated by electro‑discharge processes

Free

8456.40.00

‑Operated by plasma arc processes

Free

8456.50.00

‑Water‑jet cutting machines

5%

8456.90.00

‑Other

Free

 

8457

MACHINING CENTRES, UNIT CONSTRUCTION MACHINES (SINGLE STATION) AND MULTI‑STATION TRANSFER MACHINES, FOR WORKING METAL:

 

8457.10.00

‑Machining centres

Free

8457.20.00

‑Unit construction machines (single station)

Free

8457.30.00

‑Multi‑station transfer machines

Free

 

8458

LATHES (INCLUDING TURNING CENTRES) FOR REMOVING METAL:

 

8458.1

‑Horizontal lathes:

 

8458.11.00

‑‑Numerically controlled

Free

8458.19.00

‑‑Other

Free

8458.9

‑Other lathes:

 

8458.91.00

‑‑Numerically controlled

Free

8458.99.00

‑‑Other

Free

 

8459

MACHINE‑TOOLS (INCLUDING WAY‑TYPE UNIT HEAD MACHINES) FOR DRILLING, BORING, MILLING, THREADING OR TAPPING BY REMOVING METAL, OTHER THAN LATHES (INCLUDING TURNING CENTRES) OF 8458:

 

8459.10.00

‑Way‑type unit head machines

Free

8459.2

‑Other drilling machines:

 

8459.21.00

‑‑Numerically controlled

Free

8459.29

‑‑Other:

 

8459.29.10

‑‑‑Power operated

Free

8459.29.90

‑‑‑Other

5%

8459.3

‑Other boring‑milling machines:

 

8459.31.00

‑‑Numerically controlled

Free

8459.39.00

‑‑Other

Free

8459.4

‑Other boring machines:

 

8459.41.00

‑‑Numerically controlled

Free

8459.49.00

‑‑Other

Free

8459.5

‑Milling machines, knee‑type:

 

8459.51.00

‑‑Numerically controlled

Free

8459.59.00

‑‑Other

Free

8459.6

‑Other milling machines:

 

8459.61.00

‑‑Numerically controlled

Free

8459.69.00

‑‑Other

Free

8459.70.00

‑Other threading or tapping machines

Free

 

8460

MACHINE‑TOOLS FOR DEBURRING, SHARPENING, GRINDING, HONING, LAPPING, POLISHING OR OTHERWISE FINISHING METAL OR CERMETS BY MEANS OF GRINDING STONES, ABRASIVES OR POLISHING PRODUCTS, OTHER THAN GEAR CUTTING, GEAR GRINDING OR GEAR FINISHING MACHINES OF 8461:

 

8460.1

‑Flat‑surface grinding machines:

 

8460.12.00

‑‑Numerically controlled

Free

8460.19.00

‑‑Other

Free

8460.2

‑Other grinding machines:

 

8460.22.00

‑‑Centreless grinding machines, numerically controlled

Free

8460.23.00

‑‑Other cylindrical grinding machines, numerically controlled

Free

8460.24.00

‑‑Other, numerically controlled

Free

8460.29.00

‑‑Other

Free

8460.3

‑Sharpening (tool or cutter grinding) machines:

 

8460.31.00

‑‑Numerically controlled

Free

8460.39

‑‑Other:

 

8460.39.10

‑‑‑Power operated

Free

8460.39.90

‑‑‑Other

5%

8460.40

‑Honing or lapping machines:

 

8460.40.10

‑‑‑Power operated

Free

8460.40.90

‑‑‑Other

5%

8460.90.00

‑Other

Free

 

8461

MACHINE‑TOOLS FOR PLANING, SHAPING, SLOTTING, BROACHING, GEAR CUTTING, GEAR GRINDING OR GEAR FINISHING, SAWING, CUTTING‑OFF AND OTHER MACHINE‑TOOLS WORKING BY REMOVING METAL OR CERMETS, NOT ELSEWHERE SPECIFIED OR INCLUDED:

 

8461.20.00

‑Shaping or slotting machines

Free

8461.30.00

‑Broaching machines

Free

8461.40.00

‑Gear cutting, gear grinding or gear finishing machines

Free

8461.50.00

‑Sawing or cutting‑off machines

Free

8461.90.00

‑Other

Free

 

8462

MACHINE‑TOOLS (INCLUDING PRESSES) FOR WORKING METAL BY FORGING, HAMMERING OR DIE‑STAMPING; MACHINE‑TOOLS (INCLUDING PRESSES) FOR WORKING METAL BY BENDING, FOLDING, STRAIGHTENING, FLATTENING, SHEARING, PUNCHING OR NOTCHING; PRESSES FOR WORKING METAL OR METAL CARBIDES, NOT SPECIFIED ABOVE:

 

8462.10

‑Forging or die‑stamping machines (including presses) and hammers:

 

8462.10.10

‑‑‑Power operated

Free

8462.10.90

‑‑‑Other

5%

8462.2

‑Bending, folding, straightening or flattening machines (including presses):

 

8462.21.00

‑‑Numerically controlled

Free

8462.29

‑‑Other:

 

8462.29.10

‑‑‑Power operated

Free

8462.29.90

‑‑‑Other

5%

8462.3

‑Shearing machines (including presses), other than combined punching and shearing machines:

 

8462.31.00

‑‑Numerically controlled

Free

8462.39

‑‑Other:

 

8462.39.10

‑‑‑Power operated

Free

8462.39.90

‑‑‑Other

5%

8462.4

‑Punching or notching machines (including presses), including combined punching and shearing machines:

 

8462.41.00

‑‑Numerically controlled

Free

8462.49

‑‑Other:

 

8462.49.10

‑‑‑Power operated

Free

8462.49.90

‑‑‑Other

5%

8462.9

‑Other:

 

8462.91.00

‑‑Hydraulic presses

Free

8462.99.00

‑‑Other

Free

 

8463

OTHER MACHINE‑TOOLS FOR WORKING METAL OR CERMETS, WITHOUT REMOVING MATERIAL:

 

8463.10.00

‑Draw‑benches for bars, tubes, profiles, wire or the like

Free

8463.20.00

‑Thread rolling machines

Free

8463.30.00

‑Machines for working wire

Free

8463.90.00

‑Other

Free

 

8464

MACHINE‑TOOLS FOR WORKING STONE, CERAMICS, CONCRETE, ASBESTOS‑CEMENT OR LIKE MINERAL MATERIALS OR FOR COLD WORKING GLASS:

 

8464.10.00

‑Sawing machines

5%

8464.20.00

‑Grinding or polishing machines

5%

8464.90.00

‑Other

5%

 

8465

MACHINE‑TOOLS (INCLUDING MACHINES FOR NAILING, STAPLING, GLUEING OR OTHERWISE ASSEMBLING) FOR WORKING WOOD, CORK, BONE, HARD RUBBER, HARD PLASTICS OR SIMILAR HARD MATERIALS:

 

8465.10.00

‑Machines which can carry out different types of machining operations without tool change between such operations

5%

8465.20

‑Machining centres:

 

8465.20.70

‑‑‑Machining centres that perform 2 or more of the following:

       (a)      bending;

       (b)      assembling;

        (c)      drilling;

       (d)      morticing;

        (e)      splitting;

        (f)      slicing;

        (g)      paring

Free

8465.20.80

‑‑‑Machining centres that perform 2 or more of the following:

       (a)      sawing;

       (b)      planing;

        (c)      milling;

       (d)      moulding (by cutting);

        (e)      grinding;

        (f)      sanding;

        (g)      polishing

5%

8465.20.90

‑‑‑Other

5%

8465.9

‑Other:

 

8465.91.00

‑‑Sawing machines

5%

8465.92.00

‑‑Planing, milling or moulding (by cutting) machines

5%

8465.93.00

‑‑Grinding, sanding or polishing machines

5%

8465.94.00

‑‑Bending or assembling machines

Free

8465.95.00

‑‑Drilling or morticing machines

Free

8465.96.00

‑‑Splitting, slicing or paring machines

Free

8465.99.00

‑‑Other

5%

 

8466

PARTS AND ACCESSORIES SUITABLE FOR USE SOLELY OR PRINCIPALLY WITH THE MACHINES OF 8456 TO 8465, INCLUDING WORK OR TOOL HOLDERS, SELF‑OPENING DIEHEADS, DIVIDING HEADS AND OTHER SPECIAL ATTACHMENTS FOR THE MACHINES; TOOL HOLDERS FOR ANY TYPE OF TOOL FOR WORKING IN THE HAND:

 

8466.10.00

‑Tool holders and self‑opening dieheads

Free

8466.20.00

‑Work holders

Free

8466.30.00

‑Dividing heads and other special attachments for machines

Free

8466.9

‑Other:

 

8466.91.00

‑‑For machines of 8464

Free

8466.92.00

‑‑For machines of 8465

5%

8466.93

‑‑For machines of 8456 to 8461:

 

8466.93.10

‑‑‑For water‑jet cutting machines

5%

8466.93.90

‑‑‑Other

Free

8466.94.00

‑‑For machines of 8462 or 8463

Free

 

8467

TOOLS FOR WORKING IN THE HAND, PNEUMATIC, HYDRAULIC OR WITH SELF‑CONTAINED ELECTRIC OR NON‑ELECTRIC MOTOR:

 

8467.1

‑Pneumatic:

 

8467.11.00

‑‑Rotary type (including combined rotary percussion)

Free

8467.19.00

‑‑Other

Free

8467.2

‑With self‑contained electric motor:

 

8467.21.00

‑‑Drills of all kinds

5%

8467.22.00

‑‑Saws

5%

8467.29.00

‑‑Other

5%

8467.8

‑Other tools:

 

8467.81.00

‑‑Chain saws

5%

8467.89.00

‑‑Other

Free

8467.9

‑Parts:

 

8467.91.00

‑‑Of chain saws

5%

8467.92.00

‑‑Of pneumatic tools

Free

8467.99

‑‑Other:

 

8467.99.10

‑‑‑Of goods of 8467.21.00, 8467.22.00 or 8467.29.00

5%

8467.99.90

‑‑‑Other

Free

 

8468

MACHINERY AND APPARATUS FOR SOLDERING, BRAZING OR WELDING, WHETHER OR NOT CAPABLE OF CUTTING, OTHER THAN THOSE OF 8515; GAS‑OPERATED SURFACE TEMPERING MACHINES AND APPLIANCES:

 

8468.10.00

‑Hand‑held blow pipes

Free

8468.20

‑Other gas‑operated machinery and apparatus:

 

8468.20.10

‑‑‑For working metal, incorporating a computer control

Free

8468.20.90

‑‑‑Other

5%
DCS:4%
DCT:5%

8468.80.00

‑Other machinery and apparatus

5%
DCS:4%
DCT:5%

8468.90.00

‑Parts

5%
DCS:4%
DCT:5%

 

8470

CALCULATING MACHINES AND POCKET‑SIZE DATA RECORDING, REPRODUCING AND DISPLAYING MACHINES WITH CALCULATING FUNCTIONS; ACCOUNTING MACHINES, POSTAGE‑FRANKING MACHINES, TICKET‑ISSUING MACHINES AND SIMILAR MACHINES, INCORPORATING A CALCULATING DEVICE; CASH REGISTERS:

 

8470.10.00

‑Electronic calculators capable of operation without an external source of electric power and pocket‑size data recording, reproducing and displaying machines with calculating functions

Free

8470.2

‑Other electronic calculating machines:

 

8470.21.00

‑‑Incorporating a printing device

Free

8470.29.00

‑‑Other

Free

8470.30.00

‑Other calculating machines

Free

8470.50.00

‑Cash registers

Free

8470.90.00

‑Other

Free

 

8471

AUTOMATIC DATA PROCESSING MACHINES AND UNITS THEREOF; MAGNETIC OR OPTICAL READERS, MACHINES FOR TRANSCRIBING DATA ONTO DATA MEDIA IN CODED FORM AND MACHINES FOR PROCESSING SUCH DATA, NOT ELSEWHERE SPECIFIED OR INCLUDED:

 

8471.30.00

‑Portable automatic data processing machines, weighing not more than 10 kg, consisting of at least a central processing unit, a keyboard and a display

Free

8471.4

‑Other automatic data processing machines:

 

8471.41.00

‑‑Comprising in the same housing at least a central processing unit and an input and output unit, whether or not combined

Free

8471.49.00

‑‑Other, presented in the form of systems

Free

8471.50.00

‑Processing units other than those of 8471.41.00 or 8471.49.00, whether or not containing in the same housing one or two of the following types of unit: storage units, input units, output units

Free

8471.60.00

‑Input or output units, whether or not containing storage units in the same housing

Free

8471.70.00

‑Storage units

Free

8471.80.00

‑Other units of automatic data processing machines

Free

8471.90.00

‑Other

Free

 

8472

OTHER OFFICE MACHINES (FOR EXAMPLE, HECTOGRAPH OR STENCIL DUPLICATING MACHINES, ADDRESSING MACHINES, AUTOMATIC BANKNOTE DISPENSERS, COIN‑SORTING MACHINES, COIN‑COUNTING OR WRAPPING MACHINES, PENCIL‑SHARPENING MACHINES, PERFORATING OR STAPLING MACHINES):

 

8472.10.00

‑Duplicating machines

Free

8472.30.00

‑Machines for sorting or folding mail or for inserting mail in envelopes or bands, machines for opening, closing or sealing mail and machines for affixing or cancelling postage stamps

Free

8472.90

‑Other:

 

8472.90.10

‑‑‑Stapling machines

3.75%

 

From 1 July 2017

2.5%

 

From 1 July 2018

1.25%

 

From 1 July 2019

Free

8472.90.90

‑‑‑Other

Free

 

8473

PARTS AND ACCESSORIES (OTHER THAN COVERS, CARRYING CASES AND THE LIKE) SUITABLE FOR USE SOLELY OR PRINCIPALLY WITH MACHINES OF 8470 TO 8472:

 

8473.2

‑Parts and accessories of the machines of 8470:

 

8473.21.00

‑‑Of the electronic calculating machines of 8470.10.00, 8470.21.00 or 8470.29.00

Free

8473.29.00

‑‑Other

Free

8473.30.00

‑Parts and accessories of the machines of 8471

Free

8473.40.00

‑Parts and accessories of the machines of 8472

Free

8473.50.00

‑Parts and accessories equally suitable for use with the machines of two or more of 8470 to 8472

Free

 

8474

MACHINERY FOR SORTING, SCREENING, SEPARATING, WASHING, CRUSHING, GRINDING, MIXING OR KNEADING EARTH, STONE, ORES OR OTHER MINERAL SUBSTANCES, IN SOLID (INCLUDING POWDER OR PASTE) FORM; MACHINERY FOR AGGLOMERATING, SHAPING OR MOULDING SOLID MINERAL FUELS, CERAMIC PASTE, UNHARDENED CEMENTS, PLASTERING MATERIALS OR OTHER MINERAL PRODUCTS IN POWDER OR PASTE FORM; MACHINES FOR FORMING FOUNDRY MOULDS OF SAND:

 

8474.10.00

‑Sorting, screening, separating or washing machines

5%
DCS:4%
CA:Free
DCT:5%

8474.20.00

‑Crushing or grinding machines

5%
DCS:4%
DCT:5%

8474.3

‑Mixing or kneading machines:

 

8474.31.00

‑‑Concrete or mortar mixers

5%

8474.32.00

‑‑Machines for mixing mineral substances with bitumen

5%

8474.39.00

‑‑Other

5%
DCS:4%
CA:Free
DCT:5%

8474.80.00

‑Other machinery

5%
DCS:4%
CA:Free
DCT:5%

8474.90.00

‑Parts

5%
CA:Free

 

8475

MACHINES FOR ASSEMBLING ELECTRIC OR ELECTRONIC LAMPS, TUBES OR VALVES OR FLASH‑BULBS, IN GLASS ENVELOPES; MACHINES FOR MANUFACTURING OR HOT WORKING GLASS OR GLASSWARE:

 

8475.10.00

‑Machines for assembling electric or electronic lamps, tubes or valves or flash‑bulbs, in glass envelopes

Free

8475.2

‑Machines for manufacturing or hot working glass or glassware:

 

8475.21.00

‑‑Machines for making optical fibres and preforms thereof

Free

8475.29.00

‑‑Other

5%
DCS:4%
DCT:5%

8475.90

‑Parts:

 

8475.90.10

‑‑‑Of machines of 8475.21.00

5%
DCS:4%
DCT:5%

 

From 1 July 2018

2.5%

 

From 1 July 2019

Free

8475.90.90

‑‑‑Other

5%
DCS:4%
DCT:5%

 

8476

AUTOMATIC GOODS‑VENDING MACHINES (FOR EXAMPLE, POSTAGE STAMP, CIGARETTE, FOOD OR BEVERAGE MACHINES), INCLUDING MONEY‑CHANGING MACHINES:

 

8476.2

‑Automatic beverage‑vending machines:

 

8476.21.00

‑‑Incorporating heating or refrigerating devices

5%
DCS:4%
DCT:5%

8476.29.00

‑‑Other

5%
DCS:4%
DCT:5%

8476.8

‑Other machines:

 

8476.81.00

‑‑Incorporating heating or refrigerating devices

5%
DCS:4%
DCT:5%

8476.89

‑‑Other:

 

8476.89.10

‑‑‑Money‑changing machines

5%
DCS:4%
DCT:5%

 

From 1 July 2018

2.5%

 

From 1 July 2019

Free

8476.89.90

‑‑‑Other

5%
DCS:4%
DCT:5%

8476.90

‑Parts:

 

8476.90.10

‑‑‑Of machines of 8476.89.10

5%
DCS:4%
DCT:5%

 

From 1 July 2018

2.5%

 

From 1 July 2019

Free

8476.90.90

‑‑‑Other

5%
DCS:4%
DCT:5%

 

8477

MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE IN THIS CHAPTER:

 

8477.10.00

‑Injection‑moulding machines

5%
DCS:4%
DCT:5%

8477.20.00

‑Extruders

5%
DCS:4%
DCT:5%

8477.30.00

‑Blow moulding machines

5%
DCS:4%
DCT:5%

8477.40.00

‑Vacuum moulding machines and other thermoforming machines

5%
DCS:4%
DCT:5%

8477.5

‑Other machinery for moulding or otherwise forming:

 

8477.51.00

‑‑For moulding or retreading pneumatic tyres or for moulding or otherwise forming inner tubes

5%
DCS:4%
CA:Free
DCT:5%

8477.59.00

‑‑Other

5%
DCS:4%
DCT:5%

8477.80.00

‑Other machinery

5%
DCS:4%
DCT:5%

8477.90.00

‑Parts

5%
DCS:4%
DCT:5%

 

8478

MACHINERY FOR PREPARING OR MAKING UP TOBACCO, NOT SPECIFIED OR INCLUDED ELSEWHERE IN THIS CHAPTER:

 

8478.10.00

‑Machinery

Free

8478.90.00

‑Parts

Free

 

8479

MACHINES AND MECHANICAL APPLIANCES HAVING INDIVIDUAL FUNCTIONS, NOT SPECIFIED OR INCLUDED ELSEWHERE IN THIS CHAPTER:

 

8479.10.00

‑Machinery for public works, building or the like

5%
DCS:4%
DCT:5%

8479.20.00

‑Machinery for the extraction or preparation of animal or fixed vegetable fats or oils

Free

8479.30.00

‑Presses for the manufacture of particle board or fibre building board of wood or other ligneous materials and other machinery for treating wood or cork

Free

8479.40.00

‑Rope or cable‑making machines

Free

8479.50

‑Industrial robots, not elsewhere specified or included:

 

8479.50.10

‑‑‑Of a kind used for treating metal

Free

8479.50.20

‑‑‑Of a kind used for mixing, kneading, crushing, grinding, screening, sifting, homogenising, emulsifying or stirring

5%
DCS:4%
DCT:5%

8479.50.90

‑‑‑Other

5%

8479.60.00

‑Evaporative air coolers

5%

8479.7

‑Passenger boarding bridges:

 

8479.71.00

‑‑Of a kind used in airports

5%

8479.79.00

‑‑Other

5%

8479.8

‑Other machines and mechanical appliances:

 

8479.81.00

‑‑For treating metal, including electric wire coil‑winders

Free

8479.82.00

‑‑Mixing, kneading, crushing, grinding, screening, sifting, homogenising, emulsifying or stirring machines

5%
DCS:4%
DCT:5%

8479.89

‑‑Other:

 

8479.89.10

‑‑‑Gas‑operated machinery and apparatus for cutting metal, incorporating a computer control

Free

8479.89.20

‑‑‑Automated electronic component placement machines of a kind used solely or principally for the manufacture of printed circuit assemblies

5%

 

From 1 July 2018

3.75%

 

From 1 July 2019

Free

8479.89.30

‑‑‑Plasma cleaner machines that remove organic contaminants from electron microscopy specimens and specimen holders

5%

 

From 1 July 2018

3.75%

 

From 1 July 2019

Free

8479.89.90

‑‑‑Other

5%

8479.90

‑Parts:

 

8479.90.10

‑‑‑Of machines of 8479.89.20

5%

 

From 1 July 2018

3.75%

 

From 1 July 2019

Free

8479.90.90

‑‑‑Other

5%

 

8480

MOULDING BOXES FOR METAL FOUNDRY; MOULD BASES; MOULDING PATTERNS; MOULDS FOR METAL (OTHER THAN INGOT MOULDS), METAL CARBIDES, GLASS, MINERAL MATERIALS, RUBBER OR PLASTICS:

 

8480.10.00

‑Moulding boxes for metal foundry

5%
DCS:4%
DCT:5%

8480.20.00

‑Mould bases

5%
DCS:4%
DCT:5%

8480.30.00

‑Moulding patterns

5%
DCS:4%
DCT:5%

8480.4

‑Moulds for metal or metal carbides:

 

8480.41.00

‑‑Injection or compression types

5%
DCS:4%
DCT:5%

8480.49.00

‑‑Other

5%
DCS:4%
DCT:5%

8480.50.00

‑Moulds for glass

5%
DCS:4%
DCT:5%

8480.60.00

‑Moulds for mineral materials

5%
DCS:4%
DCT:5%

8480.7

‑Moulds for rubber or plastics:

 

8480.71.00

‑‑Injection or compression types

5%
DCS:4%
DCT:5%

8480.79.00

‑‑Other