Federal Register of Legislation - Australian Government

Primary content

Bounty (Agricultural Tractors) Regulations

SR 1983 No. 345 Regulations as amended, taking into account amendments up to SR 1985 No. 30
Registered 29 Mar 2010
Start Date 01 Apr 1985
End Date 11 May 1988
Date of repeal 11 May 1988
Repealed by Enabling legislation repealed by Bounty and Subsidy Legislation Amendment Act 1988 (Act No. 28 of 1988).

BOUNTY (AGRICULTURAL TRACTORS) REGULATIONS
- In force under the Bounty (Agricultural Tractors) Act 1966
- Reprinted as at 1 April 1985 (HISTREG CHAP 180 #DATE 01:04:1985)

*1*The Bounty (Agricultural Tractors) Regulations (in force under the Bounty (Agricultural Tractors) Act 1966) as shown in this reprint comprise Statutory Rules 1983 No. 345 amended as indicated in the Tables below.

Table of Statutory Rules

------------------------------------------------------------------------------
Date of Application, saving
Year and notification Date of or transitional
number in Gazette commencement provisions
------------------------------------------------------------------------------
1983 No. 345 30 Dec 1983 1 Jan 1984
1984 No. 44 29 Mar 1984 1 Apr 1984 -
130 29 June 1984 1 July 1984 -
259 28 Sept 1984 1 Oct 1984 -
461 21 Dec 1984 1 Jan 1985 -
1985 No. 30 28 Mar 1985 1 Apr 1985 -
------------------------------------------------------------------------------

Table of Amendments

ad. = added or inserted am. = amended rep. = repealed rs. = repealed and substituted
------------------------------------------------------------------------------
Provision affected How affected
------------------------------------------------------------------------------
R. 4 . . . . . . . . . . . . .am. 1984 Nos. 44, 130, 259 and 461; 1985 No. 30
R. 6 . . . . . . . . . . . . .am. 1984 No. 259
------------------------------------------------------------------------------

BOUNTY (AGRICULTURAL TRACTORS) REGULATIONS - TABLE OF PROVISIONS

TABLE

TABLE OF PROVISIONS

Regulation

1. Citation

2. Commencement

3. Interpretation

4. Factor for the purposes of sub-section 6 (1A) of the Act

5. Conditions of manufacture

6. Applications for bounty

7. Information to be furnished - applications for bounty

8. Authorized agents

9. Execution of documents by a company

10. Repeal of the former Bounty (Agricultural Tractors) Regulations and saving

SCHEDULE 1

APPOINTMENT OF AUTHORIZED AGENT

SCHEDULE 2

REPEALED STATUTORY RULES

BOUNTY (AGRICULTURAL TRACTORS) REGULATIONS - REG 1
Citation

1. These Regulations may be cited as the Bounty (Agricultural Tractors) Regulations.*1* SEE NOTES TO FIRST ARTICLE OF THIS CHAPTER .

BOUNTY (AGRICULTURAL TRACTORS) REGULATIONS - REG 2
Commencement

2. These Regulations shall come into operation on 1 January 1984.

BOUNTY (AGRICULTURAL TRACTORS) REGULATIONS - REG 3
Interpretation

3. In these Regulations, unless the contrary intention appears -
"authorized agent" means a person appointed under sub-regulation 8 (1);
"relevant date", in relation to an application for bounty in respect of a
tractor, means -
(a) if the tractor was sold by the manufacturer before the date of
commencement of these Regulations - that date; or
(b) in any other case - the date on which the tractor was sold by
the manufacturer;
"the Act" means the Bounty (Agricultural Tractors) Act 1966.

BOUNTY (AGRICULTURAL TRACTORS) REGULATIONS - REG 4
Factor for the purposes of sub-section 6 (1A) of the Act

4. For the purposes of sub-section 6 (1A) of the Act, the factor is 2.1796842.

BOUNTY (AGRICULTURAL TRACTORS) REGULATIONS - REG 5
Conditions of manufacture

5. The conditions to be complied with, for the purposes of the Act, in connection with the manufacture of a tractor at registered premises are as follows:

(a) tractors shall be allotted consecutive numbers;
(b) the number so allotted to a tractor shall be affixed to the tractor by being stamped by means of a die on the tractor or on a metal plate that is securely rivetted, bolted or screwed to the tractor;
(c) the number so affixed shall not be erased, altered or removed from the tractor before the first sale of the tractor.

BOUNTY (AGRICULTURAL TRACTORS) REGULATIONS - REG 6
Applications for bounty

6. (1) An application for bounty in respect of a tractor -
(a) shall be in writing;
(b) shall be signed by, or on behalf of, the manufacturer of the tractor in the presence of a witness;
(c) shall state the name and address of the witness and contain a declaration signed by the witness stating that the application was signed in the presence of the witness; and
(d) shall be delivered to the Collector for the State or Territory in which the manufacture of the tractor was completed or, if there is no such Collector, to the Comptroller-General -
(i) within a period of 3 months after the relevant date in relation
to the application; or
(ii) subject to sub-regulation (2), where the Minister or an
authorized person has consented to an extension of the period referred to in sub-paragraph (i) in relation to the application - within a period of 12 months after the relevant date in relation to the application.

(2) The Minister or an authorized person shall not give his consent to an extension of the period referred to in sub-paragraph (1) (d) (i) in relation to an application for bounty in respect of a tractor unless -
(a) a request in writing for an extension of that period has (whether before or after the expiration of that period) been made by, or on behalf of, the manufacturer of the tractor; and
(b) the application could not reasonably be expected to have been made, or to be made, within the period specified in that sub-paragraph.

BOUNTY (AGRICULTURAL TRACTORS) REGULATIONS - REG 7
Information to be furnished - applications for bounty

7. In connection with an application for bounty in respect of a tractor, the applicant shall furnish the following information:

(a) the name and address of the manufacturer of the tractor;
(b) the address of the registered premises at which the tractor was manufactured;
(c) the number allotted to the tractor under paragraph 5 (a);
(d) the output in kilowatts of the engine of the tractor, being the output within the meaning of paragraph 6 (6) (b) of the Act;
(e) the ratio between the factory cost of the materials and parts of the tractor that were wholly produced or manufactured in Australia and the factory cost of the tractor, expressed as a percentage of the factory cost of the tractor;
(f) the date on which the manufacture of the tractor was completed;
(g) the date on which the tractor was sold by the manufacturer and the name and address of the purchaser;
(h) the amount of bounty claimed;
(i) whether a previous application for bounty has been made in respect of the tractor and, if such an application has been made, the date of that application and the reason for making the application that is now being made;
(j) whether any payment has previously been made by way of bounty or advance on account of bounty in respect of the tractor and, if any payment has been so made, the date on which the payment was made and the amount paid by way of bounty or advance on account of bounty, as the case may be.

BOUNTY (AGRICULTURAL TRACTORS) REGULATIONS - REG 8
Authorized agents

8. (1) A manufacturer of tractors may, by instrument in writing, appoint a person, being a person who has attained the age of 18 years, to be his authorized agent for the purpose of signing on his behalf any document that the manufacturer may be required to sign by, or under, the Act or these Regulations.

(2) An instrument referred to in sub-regulation (1) shall be in accordance with the Form in Schedule 1 and shall be delivered to a Collector or to the Comptroller-General.

(3) A manufacturer who has appointed an authorized agent may, at any time, revoke the appointment by writing under his hand delivered to a Collector or to the Comptroller-General.

BOUNTY (AGRICULTURAL TRACTORS) REGULATIONS - REG 9
Execution of documents by a company

9. Where a manufacturer of tractors is required by, or under, the Act or these Regulations to sign a document and the manufacturer is a company, the document may be signed on behalf of the company by a director or the secretary of the company.

BOUNTY (AGRICULTURAL TRACTORS) REGULATIONS - REG 10
Repeal of the former Bounty (Agricultural Tractors) Regulations and saving

10. (1) The Statutory Rules specified in Schedule 2 are repealed.

(2) Where before the repeal of the Statutory Rules specified in Schedule 2 -
(a) a person had been appointed to be the authorized agent of a manufacturer of tractors for the purposes of the Act and of those Statutory Rules and that appointment was in operation immediately before that repeal, that appointment shall continue in operation, subject to sub-regulation 8 (3), as if it had been made under sub-regulation 8 (1);
(b) a serial number had been allotted to a tractor under those Statutory Rules, that serial number shall be deemed to have been allotted under paragraph 5 (a);
(c) an application for bounty in respect of tractors had been lodged under those Statutory Rules and that application had not been disposed of immediately before that repeal, that application shall be dealt with as if it had been lodged under these Regulations.

BOUNTY (AGRICULTURAL TRACTORS) REGULATIONS - SCHEDULE 1

SCH

SCHEDULE 1 Regulation 8

COMMONWEALTH OF AUSTRALIA
Bounty (Agricultural Tractors) Regulations
APPOINTMENT OF AUTHORIZED AGENT BY MANUFACTURER OF TRACTORS

To
(Designation of person to whom delivered)
I,
(Full name and address of manufacturer)
hereby appoint
(Full name and address of authorized agent)

a specimen of whose signature appears below, to be my authorized agent for the
purpose of signing on
my behalf any document that I may be required to sign by, or under, the Bounty
(Agricultural Tractors)
Act 1966 or the Bounty (Agricultural Tractors) Regulations.

Dated 19 .

(Signature of
manufacturer or,
where the
manufacturer is a
company, signature
of a director
or the secretary of
the company
and his designation)
(Signature of authorized agent)

BOUNTY (AGRICULTURAL TRACTORS) REGULATIONS - SCHEDULE 2

SCH

SCHEDULE 2 Regulation 10
REPEALED STATUTORY RULES
Statutory Rules 1967 No. 101
Statutory Rules 1977 Nos. 110, 171 and 281
Statutory Rules 1978 Nos. 49, 101, 179 and 274
Statutory Rules 1979 Nos. 52, 108, 204 and 276
Statutory Rules 1980 Nos. 70, 180, 291 and 379
Statutory Rules 1981 Nos. 58, 174, 268 and 381
Statutory Rules 1982 Nos. 74, 134, 237 and 400
Statutory Rules 1983 Nos. 29, 80 and 199